ATX inhibitor 26

ATX inhibitor 26 是一种 Autotaxin (ATX) 抑制剂,在人血浆中的 IC50 为 57 nM,可抑制细胞迁移和胶原凝胶收缩,并具有显著的抗纤维化作用,能减少 Bleomycin (BLM) (MS-R86735) 诱导的肺纤维化模型中的胶原沉积。
产品编号: MS-T81438 CAS No.: 2940248-11-1 分子式: C18H19Cl2N7O3 分子量: 452.29
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

ATX inhibitor 26 是一种 Autotaxin (ATX) 抑制剂,在人血浆中的 IC50 为 57 nM,可抑制细胞迁移和胶原凝胶收缩,并具有显著的抗纤维化作用,能减少 Bleomycin (BLM) (MS-R86735) 诱导的肺纤维化模型中的胶原沉积。

生物实验数据

生物活性 ATX inhibitor 26 is an Autotaxin (ATX) inhibitor with an IC50 of 57 nM in human plasma that inhibits cell migration and collagen gel contraction and exhibits significant anti-fibrotic effects by reducing collagen deposition in the Bleomycin (BLM) (MS-R86735)-induced pulmonary fibrosis model.
IC50 & Target ATX:57 nM
体外研究
(In Vitro)

ATX inhibitor 26 (Compound 27a) (500 nM) 对人血浆中的 ATX (抑制率为 94.1%,IC50:39.2 nM) 和溶血磷脂酶 D (LysoPLD) (抑制率超过 90%,IC50:57.2 nM) 均具有优异的抑制活性。
ATX inhibitor 26 (3.0 μM,12-48 小时) 显著抑制 L132、 A549 和 WI38 细胞中 LPC/TGF-β 诱导的 MAPK 活化。
ATX inhibitor 26 (0-6.0 μM,0.5-6.0 小时) 以剂量和时间依赖性的方式调节 L132 细胞中 MAPK 信号传导,且在 30 分钟内以 ≥0.5 μM 的剂量降低 ERK、p38 和 JNK 的磷酸化水平。
ATX inhibitor 26 (3.0 μM,0-48 小时) 显著降低基底细胞和 TGF-β 诱导的 A549 细胞迁移以及 WI38 细胞的胶原凝胶收缩。

Western Blot Analysis

Cell Line: L132 cells
Concentration: 0.1, 0.5, 1.0, 3.0, 6.0 μM
Incubation Time: 0.5, 1.0, 3.0, 6.0 h
Result: Dose- and time-dependently reduced the phosphorylation levels of ERK, p38, and JNK, with effects observed at dose as low as 0.5 μM and within 30 min of treatment.
Significantly suppressed LPC (1 μM) and TGF-β (5 ng/ml)-induced MAPK pathway activation.

Cell Migration Assay

Cell Line: A549 cells
Concentration: 3.0 μM
Incubation Time: 48 h
Result: Significantly reduced both basal and TGF-β-induced migration of epithelial cells.
体内研究
(In Vivo)

ATX inhibitor 26 (Compound 27a) (1 或 2 mg/kg,口服,每日一次,持续 21 天) 可减少 BLM 诱导的肺纤维化模型中胶原沉积、LPAR1 和 p-ERK1/2 表达水平,同时降低 α-SMA、Col1A1 和促炎标志物 IL-6、IL-1β 和 INF-γ 的 mRNA 水平。

Animal Model: male C57BL/6 mice (8 weeks old) were given BLM (1.8 U/kg/mouse) through intratracheal injection to induce pulmonary fibrosis.
Dosage: 1 or 2 mg/kg
Administration: oral gavage (p.o.), once a day for 21 days (7 days prior to BLM administration and 14 days post-BLM), and then collects lung tissue.
Result: Increased survival of BLM-induced pulmonary fibrosis mice.
Significantly reduced collagen deposition, LPAR1, and p-ERK1/2 expression in pulmonary tissue.
Significantly decreased mRNA levels of α-SMA, Col1A1, and pro-inflammatory markers IL-6, IL-1β, and INF-γ in a BLM-induced pulmonary fibrosis model.
Did not induced significant histopathological abnormalities in the liver, kidney, and spleen and notable changes in serum biochemical marker.

化学信息

分子量 452.29
分子式 C18H19Cl2N7O3
CAS No. 2940248-11-1

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础