(+)-SJ733

Synonyms: SJ000557733
(+)-SJ733 是一种抗疟疾剂,同时也是 Na+-ATPase PfATP4 抑制剂。
产品编号: MS-T70667 纯度: 99.79% CAS No.: 1424799-20-1 分子式: C24H16F4N4O2 分子量: 468.40
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
询价
50mg
询价
询价
100mg
询价
询价

产品描述

(+)-SJ733 是一种抗疟疾剂,同时也是 Na+-ATPase PfATP4 抑制剂。

生物实验数据

生物活性 (+)‑SJ733 is an antimalarial agent and also a Na+‑ATPase PfATP4 inhibitor.
IC50 & Target single receptor site:50 nM (Kd)
体外研究
(In Vitro)

(+)-SJ733 binds to a single receptor site in P. falciparum-infected erythrocytes with equivalent affinity to its growth-inhibitory potency (kd=50 nM). (+)-SJ733 has not exhibited either significant safety liabilities at any dose in extensive profiling in vitro or significant safety or tolerability liabilities in either single- or repeat-dose studies at any dose tested in any preclinical species (no observed adverse effect level and maximum tolerated dose >240 mg/kg from 7-d repeat dosing study in rat). Therefore, (+)-SJ733 is expected to have a safety margin of at least 43-fold.

体内研究
(In Vivo)

Treatment of P. falciparum-infected NOD-scid IL2Rγnull mice with (+)-SJ733 causes rapid clearance of parasites, which are 80% depleted within the first 24 h and undetectable by 48 h. (+)-SJ733 is highly potent and efficacious against P. falciparum 3D70087/N9 in vivo when administered as four sequential daily oral doses in the NOD-scid IL2Rγnull mouse model, with a 90% effective dose, (ED90 1.9 mg/kg) and exposure [area under the curve at ED90 (AUCED90), 1.5 μM⋅h] superior to artesunate (11.1 mg/kg; AUCED90 not determined), chloroquine (4.3 mg/kg; AUCED90 3.1 μM⋅h), and pyrimethamine (0.9 mg/kg; AUCED90 5. μM⋅h) in the same model. When treated with the ED90 dose, (+)-SJ733 concentrations in blood remain above the average in vitro EC90 for 6 to 10 h after each dose.

性状 固体
颜色 White to off-white

化学信息

分子量 468.40
分子式 C24H16F4N4O2
CAS No. 1424799-20-1
别名 SJ000557733

储存&溶解度

体内实验配方
10% DMSO+40% PEG300+5% Tween 80+45% Saline: 2 mg/mL (4.27 mM), Sonication is recommended.
请按顺序添加溶剂,在添加下一种溶剂之前,尽可能使溶液澄清。如有必要,可通过加热、超声、涡旋处理进行溶解。工作液建议现配现用。以上配方仅供参考,体内配方并不是绝对的,请根据不同情况进行调整。
储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 2 years
-20°C 1 year
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 50 mg/mL (106.75 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM2.1349 mL10.6746 mL21.3493 mL53.3732 mL
5 mM0.4270 mL2.1349 mL4.2699 mL10.6746 mL
10 mM0.2135 mL1.0675 mL2.1349 mL5.3373 mL
15 mM0.1423 mL0.7116 mL1.4233 mL3.5582 mL
20 mM0.1067 mL0.5337 mL1.0675 mL2.6687 mL
25 mM0.0854 mL0.4270 mL0.8540 mL2.1349 mL
30 mM0.0712 mL0.3558 mL0.7116 mL1.7791 mL
40 mM0.0534 mL0.2669 mL0.5337 mL1.3343 mL
50 mM0.0427 mL0.2135 mL0.4270 mL1.0675 mL
60 mM0.0356 mL0.1779 mL0.3558 mL0.8896 mL
80 mM0.0267 mL0.1334 mL0.2669 mL0.6672 mL
100 mM0.0213 mL0.1067 mL0.2135 mL0.5337 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 2 years; -20°C, 1 year。-80°C储存时,请在2年内使用, -20°C储存时,请在1年内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础