UAMC00039 dihydrochloride

UAMC00039 dihydrochloride是一种高效、可逆且竞争性的dipeptidyl peptidase II抑制剂,其IC50值为0.48 nM。
产品编号: MS-T58782 纯度: 99.49% CAS No.: 697797-51-6 分子式: C16H26Cl3N3O 分子量: 382.76
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
1mg
询价
3-5 天
2mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
3-5 天
100mg
询价
询价
200mg
询价
询价
500mg
询价
询价

产品描述

UAMC00039 dihydrochloride是一种高效、可逆且竞争性的dipeptidyl peptidase II抑制剂,其IC50值为0.48 nM。

生物实验数据

生物活性 UAMC00039 dihydrochloride is a potent, reversible, and competitive dipeptidyl peptidase II inhibitor with an IC50 value of 0.48 nM.
IC50 & Target DPP2:0.48 nM.
体外研究
(In Vitro)

UAMC00039 has an IC50 of 0.48±0.04 nM and a high selectivity for DPPII compared to DPPIV (IC50=165±9 µM) and DPP activity not caused by DPPII or DPPIV. UAMC00039 seems a promising tool to unravel the function of DPPII as well as to validate its potential as a therapeutic target. The efficacy of a DPPII inhibitor in cell culture depends not only on the inhibitors’ potency towards the enzyme but also on its stability in the medium and its ability to enter the cell. UAMC00039 is stable for at least 48 h at 37 °C in culture medium and in DPPII assay buffer. The compound is able to enter PBMC within 1 min resulting in a concentration-dependent inhibition of intracellular DPPII activity without affecting the ‘non-DPPII’ DPP activity. 1 and 100 μM UAMC00039 inhibits DPPII activity of PBMC and U937 cells more than 90%.

体内研究
(In Vivo)

A dose dependent inhibition of DPPII but not of DPPIV is observed in the peripheral organs of both the rats and the mice (after oral administration) and the rabbits (after IV administration). UAMC00039 tested orally at 2 mg/kg does not cause signs of acute toxicity and does not cause any significant changes in the following functions that are evaluated: general behaviour, body temperature, respiration, bleeding time, blood pressure, urine volume, liver function, fasting glucose and gastrointestinal parameters like acidity, motility and irritation.

性状 固体
颜色 White to off-white

化学信息

分子量 382.76
分子式 C16H26Cl3N3O
CAS No. 697797-51-6

储存&溶解度

储存方式

4°C, sealed storage, away from moisture

*In solvent: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : ≥ 150 mg/mL (391.89 mM; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

H2O 中的溶解度 : 100 mg/mL (261.26 mM; 超声助溶)

* "≥" means soluble, but saturation unknown.

可选溶剂浓度1 mg5 mg10 mg25 mg
H2O / DMSO1 mM2.6126 mL13.0630 mL26.1260 mL65.3151 mL
5 mM0.5225 mL2.6126 mL5.2252 mL13.0630 mL
10 mM0.2613 mL1.3063 mL2.6126 mL6.5315 mL
15 mM0.1742 mL0.8709 mL1.7417 mL4.3543 mL
20 mM0.1306 mL0.6532 mL1.3063 mL3.2658 mL
25 mM0.1045 mL0.5225 mL1.0450 mL2.6126 mL
30 mM0.0871 mL0.4354 mL0.8709 mL2.1772 mL
40 mM0.0653 mL0.3266 mL0.6532 mL1.6329 mL
50 mM0.0523 mL0.2613 mL0.5225 mL1.3063 mL
60 mM0.0435 mL0.2177 mL0.4354 mL1.0886 mL
80 mM0.0327 mL0.1633 mL0.3266 mL0.8164 mL
100 mM0.0261 mL0.1306 mL0.2613 mL0.6532 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础