TrxR2-IN-1 是一种 IC50 值为 0.83 μM 的硫氧还蛋白还原酶 2 (TrxR2) 抑制剂,可在线粒体中积累,破坏线粒体功能与膜电位,升高活性氧 (ROS) 水平,激活 ASK1 介导的半胱天冬酶依赖性细胞凋亡 (apoptosis),诱导 G2/M 期细胞周期阻滞并抑制癌细胞迁移,可用于肝细胞癌的研究。
产品编号: MS-T31787 CAS No.: 3085154-16-8 分子式: C50H60BrO3P 分子量: 819.89
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

TrxR2-IN-1 是一种 IC50 值为 0.83 μM 的硫氧还蛋白还原酶 2 (TrxR2) 抑制剂,可在线粒体中积累,破坏线粒体功能与膜电位,升高活性氧 (ROS) 水平,激活 ASK1 介导的半胱天冬酶依赖性细胞凋亡 (apoptosis),诱导 G2/M 期细胞周期阻滞并抑制癌细胞迁移,可用于肝细胞癌的研究。

生物实验数据

生物活性 TrxR2-IN-1 is a thioredoxin reductase 2 (TrxR2) inhibitor with an IC50 value of 0.83 μM that accumulates in mitochondria, disrupts mitochondrial function and membrane potential, elevates reactive oxygen species (ROS) levels, activates ASK1-mediated caspase-dependent apoptosis, induces G2/M cell cycle arrest, and inhibits cancer cell migration, and can be used for the study of hepatocellular carcinoma.
IC50 & Target

TrxR2

0.83 μM (IC50)

体外研究
(In Vitro)

TrxR2-IN-1 (Compound 23d) (48 h) 可强效抑制 A549、HCT116、HeLa、Huh7 及 MDA-MB-231 癌细胞的活力,且对正常 HHL5 肝细胞具有高选择性;在 Huh7 细胞中其 IC50 为 0.19 μM,SI 为 15.24。
TrxR2-IN-1 (0.8-1.6 μM; 24 h) 可在 Huh7 细胞中诱导呈剂量依赖性的形态学改变,这些改变提示细胞生长受抑制且出现细胞死亡。
TrxR2-IN-1 (0.8-1.6 μM; 24 h) 可剂量依赖性地抑制 Huh7 细胞的迁移。
TrxR2-IN-1 (0.4-1.6 μM; 24 h) 可在 Huh7 细胞中诱导剂量依赖性的 G2/M 期阻滞。
TrxR2-IN-1 (0.4-1.6 μM; 24 h) 以剂量依赖方式诱导 Huh7 细胞发生凋亡。
TrxR2-IN-1 (0.8-1.6 μM; 24 h) 可在 Huh7 细胞中诱导剂量依赖性的线粒体膜电位破坏。
TrxR2-IN-1 (0.8-1.6 μM; 24 h) 可呈剂量依赖性地升高 Huh7 细胞内的总活性氧 (ROS) 和线粒体超氧化物水平。
TrxR2-IN-1 (1.6 μM; 24 h) 在 Huh7 细胞线粒体中的积累水平比其非靶向前体 4d 高 2.6 倍。
TrxR2-IN-1 (0.4-1.6 μM; 24 h) 可在 Huh7 细胞中呈剂量依赖性激活 ASK1 介导的 caspase 凋亡通路,上调磷酸化 ASK1、剪切型 caspase-9 和剪切型 caspase-3 的水平。

Cell Migration Assay

Cell Line: Huh7
Concentration: 0.8 μM; 1.6 μM
Incubation Time: 24 h
Result: Reduced cell migration to 77.5% of the control group at 0.8 μM.
Reduced migration to 70.5% of the control group at 1.6 μM, showing a dose-dependent inhibitory effect.

Cell Cycle Analysis

Cell Line: Huh7
Concentration: 0.4 μM; 0.8 μM; 1.6 μM
Incubation Time: 24 h
Result: Caused a dose-dependent accumulation of cells in the G2/M phase, increasing from 28.2% in the control group to 39.0% at 1.6 μM.
Induced corresponding decreases in G1 and S phase cell proportions.

Apoptosis Analysis

Cell Line: Huh7, HHL5
Concentration: 0.4 μM; 0.8 μM; 1.6 μM
Incubation Time: 24 h
Result: Induced a dose-dependent increase in apoptotic cell populations in Huh7 cells, reaching 11.9%, 22.3%, and 46.6% at 0.4, 0.8, and 1.6 μM respectively.
Caused only a slight increase in apoptotic population in HHL5 cells, from 1.0% to 3.2% at 1.6 μM, showing selective pro-apoptotic activity in cancer cells.

Western Blot Analysis

Cell Line: Huh7
Concentration: 0.4 μM; 0.8 μM; 1.6 μM
Incubation Time: 24 h
Result: Caused a dose-dependent increase in the ratio of p-ASK1/ASK1, cleaved-caspase-9/caspase-9, and cleaved-caspase-3/caspase-3, indicating activation of the ASK1-mediated caspase apoptosis cascade.
体内研究
(In Vivo)

TrxR2-IN-1 (Compound 23d) (1.25-5 mg/kg;皮下注射;每 2 天 1 次共 14 天) 在 Huh7 肝癌异种移植模型中表现出强效的、剂量依赖性抗肿瘤活性。

Animal Model: BALB/cA-nude (female, 5-6 weeks old, 19−21 g, subcutaneous inoculation of Huh7 cells)
Dosage: 1.25 mg/kg; 2.5 mg/kg; 5 mg/kg
Administration: subcutaneous injection; every 2 days for 14 days
Result: Achieved a 24.3% reduction in tumor weight and 25.0% reduction in tumor volume at 1.25 mg/kg.
Achieved a 64.6% reduction in tumor weight and 62.5% reduction in tumor volume at 2.5 mg/kg.
Achieved an 85.1% reduction in tumor weight and 89.6% reduction in tumor volume at 5 mg/kg.
Showed no significant changes in body weight across treatment groups.
Exhibited no histopathological abnormalities in major organs compared to vehicle controls.
Demonstrated dose-dependent reduction in Ki67 expression, increased TUNEL positivity, and increased cleaved caspase-3 staining in tumor sections.

化学信息

分子量 819.89
分子式 C50H60BrO3P
CAS No. 3085154-16-8

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础