| 生物活性 | Nelotanserin is a potent full inverse agonist at 5-HT2A, a moderate-strength partial inverse agonist at 5-HT2C, and a weak inverse agonist at 5-HT2B, with IC50 values of 1.7, 79, and 791 nM, respectively. |
| IC50 & Target | 5-HT2C receptor:79 nM, 5-HT2B receptor:791 nM, 5-HT2A receptor:1.7 nM |
| 体外研究 (In Vitro) |
Results from IP accumulation assays suggest that Nelotanserin is a potent 5-HT2A full inverse agonist (IC50=1.7 nM), a moderately potent 5-HT2C partial inverse agonist (IC50=79 nM) (maximal response was 62% of the response obtained for the reference inverse agonist clozapine), and a weak 5-HT2B inverse agonist (IC50=791 nM). Nelotanserin displays high affinity for recombinant human 5-HT2A receptors (Ki=0.35 nM), moderate affinity for human 5-HT2C receptors (Ki=100 nM), and low affinity for human 5-HT2B receptors (2000 nM) stably expressed in HEK293 cells. The results suggest that Nelotanserin has a 262-fold higher affinity for human 5-HT2A than 5-HT2C receptors and a 6610-fold higher affinity for human 5-HT2A than 5-HT2B receptors. |
| 体内研究 (In Vivo) |
Each compound is tested in a minimum of five rats by oral gavage with administration occurring in the middle of the inactive period, 6 h after light onset. The delta power during non-REM sleep (NREMS) is significantly different between all the analogues tested and the vehicle control. Nelotanserin (Compound 39) produces significant increases in delta power that persist for the first 4 h following dosing. Significant differences are found, however, in NREMS bout length. Nelotanserin significantly increases NREMS bout length during the first hour following dosing, and 3 does so during the second hour. In conjunction with this increased NREM bout duration, the number of NREM bouts decrease during the first hour for Nelotanserin (p<0.01) as well as for compound 15 (p<0.05). |
| 性状 | 固体 |
| 颜色 | White to off-white |
| 分子量 | 437.24 |
| 分子式 | C18H15BrF2N4O2 |
| CAS No. | 839713-36-9 |
| 别名 | APD125 |
| 体内实验配方 | 10% DMSO+40% PEG300+ 5% Tween 80 + 45% Saline: 10 mg/mL (22.87 mM), Suspension. 10% DMSO+90% Saline: < 10 mg/mL (22.87 mM), Lower concentrations may be soluble, but exact solubility limit is unknown. 请按顺序添加溶剂,在添加下一种溶剂之前,尽可能使溶液澄清。如有必要,可通过加热、超声、涡旋处理进行溶解。工作液建议现配现用。以上配方仅供参考,体内配方并不是绝对的,请根据不同情况进行调整。 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 储存方式 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 运输条件 | Room temperature in continental US; may vary elsewhere. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
溶液配制表
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
DMSO 中的溶解度 : ≥ 32 mg/mL (73.19 mM; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO) * "≥" means soluble, but saturation unknown.
* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:
比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。
母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。
体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清
以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。
方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。
计算结果:
工作液浓度: mg/ml;
DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,
体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。
1. 首先保证母液是澄清的;
2.
一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。