Subtilisin

Synonyms: 枯草杆菌蛋白酶; EC 3.4.21.14
Subtilisin (EC 3.4.21.14) 是一种细菌丝氨酸蛋白酶 (bacterial serine protease),可诱导凋亡 (Apoptosis)、刺激促过敏细胞因子 (IL-1α、IL-33) 表达、诱导原型过敏性肺部炎症,对乳腺癌和结肠癌具有抗癌活性,并具有防污活性,可作为洗涤剂添加剂。
产品编号: MS-T22009 CAS No.: 9014-01-1
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
3-5 天
100mg
询价
3-5 天
200mg
询价
3-5 天
500mg
询价
3-5 天
1g
询价
询价
5g
询价
询价

产品描述

Subtilisin (EC 3.4.21.14) 是一种细菌丝氨酸蛋白酶 (bacterial serine protease),可诱导凋亡 (Apoptosis)、刺激促过敏细胞因子 (IL-1α、IL-33) 表达、诱导原型过敏性肺部炎症,对乳腺癌和结肠癌具有抗癌活性,并具有防污活性,可作为洗涤剂添加剂。

生物实验数据

生物活性 Subtilisin (EC 3.4.21.14) is a bacterial serine protease that induces apoptosis (Apoptosis), stimulates the expression of pro-allergic cytokines (IL-1α, IL-33), induces prototype allergic pulmonary inflammation, exhibits anticancer activity against breast and colon cancers, possesses antifouling activity, and can serve as a detergent additive.
体外研究
(In Vitro)

产品信息
是经原生质体诱变方法选育的枯草杆菌通过深层发酵、提取及精制而成的一种蛋白水解酶。能水解蛋白质分子肽链生成多肽或氨基酸,在有机溶剂中还可、催化多肽的合成,本品含有稳定剂。

有效温度范围:20-60℃,最适作用温度在 35-45℃ 之间。
有效 pH 范围:6.0-11.0,最适 pH 值范围在 9.5-10.5 之间。
激活剂:Ca2+、Mg2+、Mn2+、Zn2+、Fe2+。
抑制剂:作用于丝氨酸的试剂如磺酰卤化物。

使用说明
可溶于 100 mg/mL ddH2O,避免反复冻融。或根据具体实验参考文献溶解。
Subtilisin (3-5 μg/mL;24 h) 对 MCF-7 和 HT-29 癌细胞表现出细胞毒作用,MCF-7 细胞表现出凋亡细胞特征,HT-29 细胞表现出坏死细胞特征。
Subtilisin 具有防污活性。
Subtilisin (1.0-10 μg/mL;3-6 h) 可刺激 H292 细胞中促过敏细胞因子 IL-1α、IL-33、TSLP 和生长因子双调蛋白的表达。

Apoptosis Analysis

Cell Line: MCF-7
Concentration: 0 μg/mL, 3 μg/mL, 5 μg/mL
Incubation Time: 24 h
Result: Increased apoptotic rate.
Showed no changes in the levels of pro-apoptotic protein Bax and anti-apoptotic protein Bcl-2.
体内研究
(In Vivo)

Subtilisin (1 μg;皮下或鼻内注射;致敏两次,激发两次;整个实验周期为 22 天) 可在 C57BL/6 小鼠中诱发原发性过敏性肺部炎症。

Animal Model: Female C57BL/6 mice (8-12 weeks old), allergic airway disease model
Dosage: 1 μg
Administration: Subcutaneous (s.c.) or intranasal (i.n.). Sensitization: s.c. or i.n. injection with 1 μg of subtilisin on days 0 and 7. Challenge: i.n. administration with 1 μg of subtilisin on days 14 and 21. whole experimental cycle of 22 days
Result: Induced high levels of serum IgE and specific IgG1.
Led to intense airway eosinophilic inflammation, as shown by total and differential cell counts in bronchoalveolar lavage (BAL).
Induced pronounced airway inflammation and mucus formation.
Promoted increased bronchoconstriction to inhaled methacholine and induced a late-phase response.
Induced allergic responses dependent on its protease activity, protease-activated receptor (PAR)-2, IL-33 receptor ST2, and MyD88 signaling.
性状 固体
颜色 Light yellow to light brown

化学信息

CAS No. 9014-01-1
别名 枯草杆菌蛋白酶; EC 3.4.21.14

储存&溶解度

溶解度信息
H2O: 247.5 mg/mL, Sonication is recommended.
储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础