FYJ-195 是一种强效的具有口服活性的 FLT3 抑制剂,靶向 FLT3 及其突变体 FLT3-ITD、FLT3-F691L、FLT3-D835V 和 FLT3-D835Y,可阻断 FLT3 的自磷酸化以及下游 STAT5、AKT、ERK 信号通路并诱导细胞凋亡 (apoptosis),且能在小鼠急性髓系白血病 (AML) 异种移植模型中诱导肿瘤消退,可用于 AML 的相关研究。
FYJ-195
产品编号: MS-T15754 分子式: C26H26F3N7O2 分子量: 525.53
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

FYJ-195 是一种强效的具有口服活性的 FLT3 抑制剂,靶向 FLT3 及其突变体 FLT3-ITD、FLT3-F691L、FLT3-D835V 和 FLT3-D835Y,可阻断 FLT3 的自磷酸化以及下游 STAT5、AKT、ERK 信号通路并诱导细胞凋亡 (apoptosis),且能在小鼠急性髓系白血病 (AML) 异种移植模型中诱导肿瘤消退,可用于 AML 的相关研究。

生物实验数据

生物活性 FYJ-195 is a potent orally active FLT3 inhibitor that targets FLT3 and its mutants FLT3-ITD, FLT3-F691L, FLT3-D835V, and FLT3-D835Y, blocks FLT3 autophosphorylation and the downstream STAT5, AKT, and ERK signaling pathways, induces apoptosis, and promotes tumor regression in mouse acute myeloid leukemia (AML) xenograft models, making it suitable for research related to AML.
体外研究
(In Vitro)

FYJ-195 可强效抑制 FLT3-WT、FLT3-ITD 及耐药性 FLT3 突变体 (F691L、D835Y),其 IC50 值 ≤2.03 nM,同时对包括 KDR 和 JAK1 在内的一小部分其他激酶也具有抑制活性。
FYJ-195 可强效抑制由 FLT3-ITD 驱动的 MOLM-13 和 MV4-11 急性髓系白血病 (AML) 细胞增殖,其 IC50 值分别为 0.80 nM 和 0.22 nM;同时,该化合物对 FLT3-WT 细胞、非 FLT3 依赖性癌细胞及正常细胞仅表现出极低活性,显示出较高的靶标选择性。
FYJ-195 可强效抑制携带 FLT3-ITD 及耐药性 FLT3 突变 (N676D, D835V, D835Y, F691L) 的 BaF3 细胞增殖,其 IC50 值范围为 0.41 nM 至 9.09 nM。
FYJ-195 (0.1-100 nM; 24 h) 可呈剂量依赖性地将 MOLM-13 和 MV4-11 急性髓系白血病 (AML) 细胞阻滞于 G0-G1 期。
FYJ-195 (0.1-100 nM; 24-48 h) 可剂量依赖性地诱导 MOLM-13 和 MV4-11 急性髓系白血病 (AML) 细胞发生凋亡,且处理 48 h 后的效果强于 24 h,在 100 nM 浓度下的最大凋亡率超过 60%。
FYJ-195 (0.1-100 nM; 2-12 h) 可剂量依赖性地抑制 FLT3-ITD 驱动的 AML 细胞及 FLT3 突变转化的 BaF3 细胞 (包括耐药性 F691L 和 D835V 变异株) 中的 FLT3-STAT5/AKT/ERK 信号通路,而对不依赖 FLT3 的 K562 细胞的信号通路无影响。

Cell Cycle Analysis

Cell Line: MOLM-13, MV4-11 cells
Concentration: 0.1; 1; 10; 100 nM
Incubation Time: 24 h
Result: Increased the percentage of G0-G1 phase cells in MOLM-13 from 49.7% (vehicle) to 56.0% (0.1 nM), 63.6% (1 nM), 79.4% (10 nM), and 89.6% (100 nM).
Increased the percentage of G0-G1 phase cells in MV4-11 from 53.2% (vehicle) to 54.5% (0.1 nM), 72.9% (1 nM), 85.7% (10 nM), and 92.4% (100 nM).

Apoptosis Analysis

Cell Line: MOLM-13, MV4-11 cells
Concentration: 0.1; 1; 10; 100 nM
Incubation Time: 24; 48 h
Result: Induced apoptosis rates in MOLM-13 of 4.39% (0.1 nM), 9.71% (1 nM), 15.32% (10 nM), and 26.2% (100 nM) after 24 h, and 5.48% (0.1 nM), 14.62% (1 nM), 36.1% (10 nM), and 60.6% (100 nM) after 48 h.
Induced apoptosis rates in MV4-11 of 5.56% (0.1 nM), 13.34% (1 nM), 20.64% (10 nM), and 25.8% (100 nM) after 24 h, and 9.13% (0.1 nM), 19.53% (1 nM), 51.66% (10 nM), and 65.43% (100 nM) after 48 h.

Western Blot Analysis

Cell Line: MOLM-13, MV4-11 cells, BaF3-FLT3-ITD-F691L, BaF3-FLT3-ITD-D835V cells, FLT3-independent K562 cells
Concentration: 0.1; 0.3; 1; 3; 10; 30; 100 nM
Incubation Time: 2 h (MOLM-13/MV4-11); 12 h (BaF3/K562)
Result: Dose-dependently reduced phosphorylation of FLT3, STAT5, AKT, and ERK in MOLM-13 and MV4-11 cells, with near-complete inhibition observed at 10 nM to 30 nM.
Dose-dependently suppressed p-FLT3 and p-STAT5 in BaF3-FLT3-ITD-F691L and BaF3-FLT3-ITD-D835V cells, with complete inhibition at 100 nM (a concentration where quizartinib showed no significant activity).
Had no effect on phosphorylation of FLT3, STAT5, ERK, or AKT in K562 cells.
体内研究
(In Vivo)

FYJ-195 (10-50 mg/kg;静脉注射;每日一次;连续 14 天) 可诱导 MV4-11 急性髓系白血病异种移植物出现显著的剂量依赖性肿瘤消退。
FYJ-195 (10-50 mg/kg;腹腔注射;每日 1 次;连续 9 天) 在 FLT3F691L 耐药性小鼠 AML 异种移植模型中可实现显著的肿瘤生长抑制效果。

Animal Model: NOD/SCID mice (male, 4-5 weeks old) subcutaneously injected with MV4-11 cells
Dosage: 10; 25; 50 mg/kg
Administration: i.v.; daily; 14 days
Result: Induced tumor growth inhibition (TGI) of 125%, 128%, and 130% at 10, 25, and 50 mg/kg, respectively.
Achieved tumor weight inhibition rates (IR) of 90.6%, 97.6%, and 98.7% at 10, 25, and 50 mg/kg, respectively.
Reduced Ki-67 positive cells in a dose-dependent manner in tumor tissues.
Increased TUNEL-positive apoptotic cells in a dose-dependent manner in tumor tissues.
Abrogated p-STAT5 in tumor tissues.
Caused no significant body weight loss or organ pathology across doses.
Animal Model: BALB/c nude (female, 4-6 weeks old) subcutaneously injected with BaF3-FLT3-ITD-F691L cells
Dosage: 10; 50 mg/kg
Administration: i.p.; daily; 9 days
Result: Induced tumor growth inhibition (TGI) of 21.3% at 10 mg/kg and 68.6% at 50 mg/kg.
Achieved tumor weight inhibition rates (IR) of 18% at 10 mg/kg and 61% at 50 mg/kg.
Caused no significant body weight loss in treated mice.

化学信息

分子量 525.53
分子式 C26H26F3N7O2

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础