BCR-ABL-IN-6 (9h) 是一种选择性 Bcr-Abl 激酶抑制剂,对 Bcr-AblWT 和 Bcr-AblT3151 的 IC50 分别为 4.6 和 227 nM,对 Bcr-Abl 激酶具有较强细胞内亲和力(EC50 为 14.6 nM),是一种可用于慢性髓细胞性白血病研究的伊马替尼衍生物。
产品编号: MS-S88792 CAS No.: 2499499-26-0 分子式: C27H22F3N5O2 分子量: 505.49
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

BCR-ABL-IN-6 (9h) 是一种选择性 Bcr-Abl 激酶抑制剂,对 Bcr-AblWT 和 Bcr-AblT3151 的 IC50 分别为 4.6 和 227 nM,对 Bcr-Abl 激酶具有较强细胞内亲和力(EC50 为 14.6 nM),是一种可用于慢性髓细胞性白血病研究的伊马替尼衍生物。

生物实验数据

生物活性 BCR-ABL-IN-6 (9h) is a selective Bcr-Abl kinase inhibitor with IC50 values of 4.6 and 227 nM against Bcr-AblWT and Bcr-AblT3151, respectively, and exhibits strong intracellular affinity for Bcr-Abl kinase with an EC50 of 14.6 nM; it is an imatinib derivative useful for the study of chronic myeloid leukemia.
IC50 & Target

IC50: 4.6 nM (Bcr-AblWT), 227 nM (Bcr-AblT3151)

体外研究
(In Vitro)

BCR-ABL-IN-6 (10 μM; 1 h) againts with c-Src which is a closely related kinase domain of Bcr-Abl and exerts superior cellular potencies to imatinib.
BCR-ABL-IN-6 (10 μM; 1 h) suppresses Bcr-Abl phosphorylation dose dependenly and results underscored selective antiproliferative effects towards Bcr-Abl.
BCR-ABL-IN-6 (10 μM; 1 h) shows great selectivity cytotoxic between K562 and L132 cells.
BCR-ABL-IN-6 (10 μM) shows strong cytostatic activity against K562 and HL60 cells.
BCR-ABL-IN-6 (10 μM) shows exceptional selective antiproliferative effects towards the Bcr-Abl positive leukemia cell K562.

Western Blot Analysis

Cell Line: K562 cell line
Concentration: 0.003, 0.01, 0.03, 0.1 and 0.3 μM
Incubation Time: 1 h
Result: Showed a dose-dependent suppression of Bcr-Abl phosphorylation.

Cell Viability Assay

Cell Line: K562 and L132 cell lines
Concentration: 10 μM
Incubation Time: 1 h
Result: Exerted cellular activity with GI50 less than 160 nM against the Bcr-Abl positive leukemia K562 cells and exerted superior cellular potencies to imatinib with GI50 of 0.02 μM. Showed selectivity cytotoxic effects to the normal cell L132 with GI50 of 9.27 μM.
体内研究
(In Vivo)

BCR-ABL-IN-6 (5 and 10 mg/kg; male ICR mice; for 9 h) takes 0.6 h to reach the maximum concentration (Cmax). With intravenous and oral administration, the AUClast values of BCR-ABL-IN-6 are 14018.7 ng·h/mL and 174.7 ng·h/mL. BCR-ABL-IN-6 intravenous administration is better, but unfavorable oral administration.

Animal Model: Male ICR mice
Dosage: 5 mg/kg and 10 mg/kg
Administration: Intravenous and oral; 5 and 10 mg/kg; for 9h
Result: Oral administration is not as effective as intravenous injection, intravenous injection is better.

化学信息

分子量 505.49
分子式 C27H22F3N5O2
CAS No. 2499499-26-0

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础