Furazolidone

Synonyms: 呋喃唑酮
Furazolidone 是一种单胺氧化酶 (MAO) 抑制剂,具有抗增殖、诱导凋亡和促进分化的活性,可能通过上调肿瘤抑制蛋白 p53 的稳定性来抑制白血病融合蛋白介导的骨髓转化,并在急性髓系白血病 (AML) 细胞系中展现出抗白血病活性,因此可用于抗 AML 的研究。
产品编号: MS-S51261 纯度: 99.87% CAS No.: 67-45-8 分子式: C8H7N3O5 分子量: 225.16
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
100mg
询价
3-5 天
500mg
询价
3-5 天
1g
询价
询价
5g
询价
询价

产品描述

Furazolidone 是一种单胺氧化酶 (MAO) 抑制剂,具有抗增殖、诱导凋亡和促进分化的活性,可能通过上调肿瘤抑制蛋白 p53 的稳定性来抑制白血病融合蛋白介导的骨髓转化,并在急性髓系白血病 (AML) 细胞系中展现出抗白血病活性,因此可用于抗 AML 的研究。

生物实验数据

生物活性 Furazolidone is a monoamine oxidase (MAO) inhibitor with antiproliferative, apoptosis-inducing, and differentiation-promoting activities that may inhibit leukemia fusion protein-mediated myeloid transformation by upregulating the stability of the tumor suppressor protein p53, exhibits anti-leukemic activity in acute myeloid leukemia (AML) cell lines, and can therefore be used for anti-AML research.
IC50 & Target AML1-ETO:12.7 μM
体外研究
(In Vitro)

Furazolidon (50 μM;在逆转录病毒转导/转化试验中) 抑制一系列白血病融合蛋白 (包括 AML1-ETO、MLL-ENL、MLL-AF9 和 R1A-RAR-RIIa) 介导的骨髓转化,并且与 AML1-ETO 转化细胞相比,对正常小鼠骨髓 c-Kit 阳性细胞显示出相对较高的 IC50值。
Furazolidon (1-50 μM;24-72 h) 以剂量和时间依赖的方式抑制 AML 细胞系 (Kasumi-1、NB4、MolM13、MV4-11、U937 和 HL-60) 的增殖,IC50值范围为 10-20μM,同时损害白血病细胞 (Kasumi-1、NB4、MolM-13) 形成集落的能力。
Furazolidon (各细胞系的 IC50值;72 h) 诱导 AML 细胞 (Kasumi-1、NB4、MV4-11、MolM13) 凋亡,与载体处理的对照组 (DMSO) 相比,Kasumi-1 中 Annexin V+/7-AAD + 百分比增加 2.1 倍,NB4 中增加 1.7 倍,MV4-11 中增加 2.0 倍,MolM13 中增加 1.6 倍,但在 U937 和 HL-60 白血病细胞中没有增加凋亡的证据。
Furazolidon (各细胞系的 IC50值;72 h) 诱导 AML 细胞系 (Kasumi-1、NB4、MV4-11) 分化,表现为髓系分化标志物 CD11b 表达增加、出现分化特征性的形态学变化 (如颗粒出现和细胞核浓缩) 以及 Kasumi-1 和 NB4 细胞中 NBT 阳性率增加。
Furazolidon (各细胞系的 IC50值;72 h) 上调 AML 细胞 (Kasumi-1、NB4、MV4-11、MolM13) 中 p53 的蛋白质水平,但不上调其 mRNA 水平。

Cell Viability Assay

Cell Line: Kasumi-1, NB4, MolM13, MV4-11, U937, HL-60
Concentration: 1-50 μM
Incubation Time: 24 h, 48 h, 72 h
Result: The number of viable cells in these AML cell lines decreased in a dose-and time-dependent manner when treated with Furazolidone.
The IC50 values, measured when cells were treated with Furazolidone for 72 h, ranged from 10-20 μM.
Furazolidone also compromised the ability of Kasumi-1, NB4, and MolM-13 cells to form colonies.

Apoptosis Analysis

Cell Line: Kasumi-1, NB4, MV4-11, MolM13, U937, HL-60
Concentration: IC50 values for each cell line (Kasumi-1: 20 μM; NB4: 20 μM; MV4-11: 20 μM; MolM13: 15 μM; U937: 20 μM; HL-60: 10 μM)
Incubation Time: 72 h
Result: Significantly increased the apoptosis rate in Kasumi-1, NB4, MV4-11, and MolM13 cells. The %Annexin V+/7-AAD+ increased by 2.1-fold in Kasumi-1, 1.7-fold in NB4, 2.0-fold in MV4-11, and 1.6-fold in MolM13 compared with the DMSO-treated control.
There was no evidence of increased apoptosis in U937 and HL-60 cells.

Cell Cycle Analysis

Cell Line: AML cell lines
Concentration: IC50 values for each cell line (Kasumi-1: 20 μM; NB4: 20 μM; MV4-11: 20 μM; MolM13: 15 μM; U937: 20 μM; HL-60: 10 μM)
Incubation Time: 24 h
Result: Did not modulate the cell-cycle distribution in AML cells, suggesting that it prolonged cell-doubling time rather than inducing cell-cycle arrest.

Western Blot Analysis

Cell Line: Kasumi-1, NB4, MV4-11, MolM13
Concentration: IC50 values for each cell line (Kasumi-1: 20 μM; NB4: 20 μM; MV4-11: 20 μM; MolM13: 15 μM; U937: 20 μM; HL-60: 10 μM)
Incubation Time: 72 h
Result: Up-regulated the protein level of p53 in these cells, while the relative intensity of β-actin was used as a control. The relative protein levels of p53, normalized to β-actin, were 3.2 in Kasumi-1, 2.1 in NB4, 4.0 in MV4-11, and 2.7 in MolM13. qPCR: Cell Line: Kasumi-1, NB4, MV4-11, MolM13, U937, HL-60 Concentration: Predetermined IC50 value for each cell line Incubation Time: 72 h Result: Furazolidone treatment did not up-regulate the mRNA level of p53 in these AML cell lines. However, it significantly increased the p21 mRNA level in all the cell lines tested, but the impact of this increase on the anti-leukemic effects of Furazolidone was unknown.
性状 固体
颜色 Light yellow to yellow

化学信息

分子量 225.16
分子式 C8H7N3O5
CAS No. 67-45-8
别名 呋喃唑酮

储存&溶解度

体内实验配方
10% DMSO+90% Saline: 1.91 mg/mL (8.48 mM), Solution.
请按顺序添加溶剂,在添加下一种溶剂之前,尽可能使溶液澄清。如有必要,可通过加热、超声、涡旋处理进行溶解。工作液建议现配现用。以上配方仅供参考,体内配方并不是绝对的,请根据不同情况进行调整。
储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 2 years
-20°C 1 year
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 5.56 mg/mL (24.69 mM; 超声助溶 (<60°C); 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

H2O 中的溶解度 : 0.67 mg/mL (2.98 mM; 超声助溶)

可选溶剂浓度1 mg5 mg10 mg25 mg
H2O / DMSO1 mM4.4413 mL22.2064 mL44.4129 mL111.0322 mL
DMSO5 mM0.8883 mL4.4413 mL8.8826 mL22.2064 mL
10 mM0.4441 mL2.2206 mL4.4413 mL11.1032 mL
15 mM0.2961 mL1.4804 mL2.9609 mL7.4021 mL
20 mM0.2221 mL1.1103 mL2.2206 mL5.5516 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 2 years; -20°C, 1 year。-80°C储存时,请在2年内使用, -20°C储存时,请在1年内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础