DNMT1 Degrader-1

DNMT1 Degrader-1 是一种选择性 DNMT1 降解剂(IC50 为 202.87 nM,Kd 值为 122 nM),可作为分子胶与 DNMT1 和 UHRF1 形成三元复合物,触发 UHRF1 介导的 DNMT1 泛素化与降解并抑制 DNMT1 的酶活性,从而抑制原代急性髓系白血病细胞的增殖、发挥抗肿瘤活性,可用于急性髓系白血病的研究。
产品编号: MS-S40370 CAS No.: 2962943-72-0 分子式: C24H32N4O2 分子量: 408.54
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

DNMT1 Degrader-1 是一种选择性 DNMT1 降解剂(IC50 为 202.87 nM,Kd 值为 122 nM),可作为分子胶与 DNMT1 和 UHRF1 形成三元复合物,触发 UHRF1 介导的 DNMT1 泛素化与降解并抑制 DNMT1 的酶活性,从而抑制原代急性髓系白血病细胞的增殖、发挥抗肿瘤活性,可用于急性髓系白血病的研究。

生物实验数据

生物活性 DNMT1 Degrader-1 is a selective DNMT1 degrader (IC50 = 202.87 nM, Kd = 122 nM) that acts as a molecular glue to form a ternary complex with DNMT1 and UHRF1, triggering UHRF1-mediated ubiquitination and degradation of DNMT1 and inhibiting DNMT1 enzymatic activity, thereby suppressing the proliferation of primary acute myeloid leukemia cells and exerting antitumor activity, and can be used for the study of acute myeloid leukemia.
IC50 & Target DNMT1:202.87 nM, DNMT1:122 nM (Kd), DNMT1:123.4 nM (DC50)
体外研究
(In Vitro)

DNMT1 Degrader-1 (compound 6k) (0-2000 nM; 0-24 h) 可在 MV-4-11 急性髓系白血病 (AML) 细胞中诱导 DNMT1 蛋白呈时间和浓度依赖性降解,其 DC50 为 123.4 nM。
DNMT1 Degrader-1 (0.25-1 μM; 24 h) 不会影响 Kasumi-1 或 MV-4-11 AML 细胞中的 DNMT1 mRNA 水平。
DNMT1 Degrader-1(1 μM; 6 h) 可在 MV-4-11 急性髓系白血病 (AML) 细胞中诱导 DNMT1 蛋白发生泛素化,进而导致其蛋白酶体降解。
DNMT1 Degrader-1 (1 μM; 0-24 h) 诱导 MV-4-11 急性髓系白血病 (AML) 细胞中 DNMT1 发生泛素化和降解的作用依赖于 UHRF1。
DNMT1 Degrader-1 (72 h) 可抑制多种 AML 及血液癌细胞系的增殖。
DNMT1 Degrader-1 (0.2-2 μM; 24 h) 可在 MV-4-11 和 Kasumi-1 急性髓系白血病 (AML) 细胞中诱导剂量依赖性细胞周期阻滞。

Western Blot Analysis

Cell Line: MV-4-11 AML cells
Concentration: 0, 50, 100, 200, 400, 600, 800, 1000, 1500, 2000 nM
Incubation Time: 0, 6, 9, 12, 15, 24 h
Result: Induced time-dependent degradation of DNMT1 protein, with complete elimination observed by 24 h at 1 μM.
Induced concentration-dependent DNMT1 degradation with a DC50 of 123.4 nM after 24 h treatment.

Cell Cycle Analysis

Cell Line: MV-4-11 and Kasumi-1 AML cells
Concentration: 0.2, 0.5, 1, 2 μM
Incubation Time: 24 h
Result: Induced dose-dependent G1 phase accumulation with reduced cell numbers in S and G2/M phases in MV-4-11 cells.
Induced dose-dependent S phase accumulation with reduced cell numbers in G1 and G2/M phases in Kasumi-1 cells.
体内研究
(In Vivo)

DNMT1 Degrader-1 (40 mg/kg;腹腔注射;每日一次;连续 16 天) 在 MV‑4‑11 细胞衍生异种移植、WEHI‑3 原位移植及 AML 患者来源异种移植小鼠模型中显著抑制急性髓系白血病生长并延长生存期。
DNMT1 Degrader-1 (40 mg/kg;腹腔注射;每日给药;连续 14 天) 在健康 BALB/c 小鼠中经 14 天每日腹腔注射给药后,表现出极低的体内血液学毒性。

Animal Model: BALB/c mice (18-22 g, 6-8 weeks) with MV‑4‑11 subcutaneous xenografts or WEHI‑3 orthotopic transplantation; NOG mice (16-20 g, 6 weeks) with AML patient‑derived xenografts
Dosage: 40 mg/kg
Administration: i.p.; daily; 16 days
Result: Markedly inhibited tumor growth in MV‑4‑11 xenograft mice, alleviated leukemia‑induced splenomegaly, reduced leukemic cell infiltration in liver and spleen.
Significantly prolonged the overall survival of WEHI‑3 orthotopic transplantation mice.
Obviously increased the survival rate of AML PDX mice, reduced the population of human CD45+ AML cells in bone marrow and peripheral blood, and showed potent in vivo anti‑AML efficacy with favorable safety.

化学信息

分子量 408.54
分子式 C24H32N4O2
CAS No. 2962943-72-0

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础