3'-Sialyllactose

Synonyms: 3'-SL
3'-Sialyllactose (3'-SL) 是一种益生元,具有维持免疫稳态以及抗炎和抗关节炎的作用,同时也是毒性等级最低的普通碳水化合物,可用于炎症的研究。
产品编号: MS-S37929 CAS No.: 35890-38-1 分子式: C23H39NO19 分子量: 633.55
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

3'-Sialyllactose (3'-SL) 是一种益生元,具有维持免疫稳态以及抗炎和抗关节炎的作用,同时也是毒性等级最低的普通碳水化合物,可用于炎症的研究。

生物实验数据

生物活性 3'-Sialyllactose (3'-SL) is a prebiotic that helps maintain immune homeostasis and exerts anti-inflammatory and anti-arthritic effects, and it is also an ordinary carbohydrate with the lowest toxicity level, making it suitable for inflammation research.
体外研究
(In Vitro)

3'-Sialyllactose (0-250 μM; 24-36 h) promotes and restores Col2a1 synthesis and accumulates extracellular sulphated proteoglycan, and inhibits the effect of inflammatory cytokines.
3'-Sialyllactose (0-250 μM; 24 h) activates the expression of Sox9 and inhibits NF-κB activation in chondrocytes.
3'-Sialyllactose (0-5000 μg/plate) shows no mutagenic effect with no evident growth inhibition and deposition in all strains in the presence or absence of metabolic activation.
3'-Sialyllactose (1250 μg/mL) induces no chromosomal aberrations and shows non-clastogenic effect in either the presence or absence of metabolic activation.

Western Blot Analysis

Cell Line: Chondrocytes
Concentration: 0, 50, 100 and 250 μM
Incubation Time: 24-36 hours
Result: Dose-dependently increased Col2a1 transcript and protein levels, and restored Col2a1 expression in IL-1β-treated chondrocytes. Dose-dependently inhibited IL-1β-induced Mmp3, Mmp13 and Cox2 expression in chondrocytes. Reduced expression of Mmp3, Mmp13 and Cox2 induced by IL-6, IL-17 and TNF-α in chondrocytes.
体内研究
(In Vivo)

3'-Sialyllactose (10-100 mg/kg; p.o. three times a week for 6 weeks) protects mice against cartilage destruction from osteoarthritis.
3'-Sialyllactose (500, 1000 and 2000 mg/kg; orally administration; once) induces no micronuclei in the bone marrow cells of mice.
3'-Sialyllactose (oral administration; (500 to 1000 to 2000 mg/kg) every dose at 4-day intervals) shows the maximum tolerance dose (MTD) is greater than 2000 mg/kg in male and female beagle dogs.
3'-Sialyllactose shows a lethal dose (LD50) above 20 g/kg bw, the highest dose tested.

Animal Model: 8-week-old male C57BL/6 mice with medial meniscus surgery
Dosage: 10, 50 and 100 mg/kg
Administration: Oral gavage; 10-100 mg/kg three times a week; for 6 weeks
Result: Effectively protected osteoarthritis mice against cartilage destruction by catabolic factor expression.

化学信息

分子量 633.55
分子式 C23H39NO19
CAS No. 35890-38-1
别名 3'-SL

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础