RIPK1-IN-32 是一种具有抗炎活性的 RIPK 抑制剂,可抑制一氧化氮 (NO) 的释放(IC50 值为 3.26 μM),并通过 RIPK1/NF-κB/MAPK 通路阻止 p65 和 c-fos 的核转位,从而降低 TNF-α 和 IL-6 的表达,进而显著减轻与脓毒症相关的急性肝损伤,因此可用于急性肝损伤和脓毒症的研究。
RIPK1-IN-32
产品编号: MS-S36468 分子式: C42H59NO7S2 分子量: 754.05
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

RIPK1-IN-32 是一种具有抗炎活性的 RIPK 抑制剂,可抑制一氧化氮 (NO) 的释放(IC50 值为 3.26 μM),并通过 RIPK1/NF-κB/MAPK 通路阻止 p65 和 c-fos 的核转位,从而降低 TNF-α 和 IL-6 的表达,进而显著减轻与脓毒症相关的急性肝损伤,因此可用于急性肝损伤和脓毒症的研究。

生物实验数据

生物活性 RIPK1-IN-32 is a RIPK inhibitor with anti-inflammatory activity that inhibits nitric oxide (NO) release with an IC50 value of 3.26 μM and, through the RIPK1/NF-κB/MAPK pathway, prevents the nuclear translocation of p65 and c-fos, thereby reducing the expression of TNF-α and IL-6 and consequently significantly alleviating sepsis-associated acute liver injury, making it useful for the study of acute liver injury and sepsis.
IC50 & Target

NF-κB

 

IL-6

 

RIPK1

 

体外研究
(In Vitro)

RIPK1-IN-32 (Compound 12) (0-25 μM, 45-63 ℃) 显著抑制了 RAW264.7 巨噬细胞中 RIPK1 的热降解。
RIPK1-IN-32 (2.5 μM) 显著减少了 RAW264.7 巨噬细胞中 p65 和 c-fos 的核转移。
RIPK1-IN-32 (0.625-2.5 μM, 8 h) 显著降低了 RAW 264.7 细胞中 IL-6 和 TNF-α 的水平。
RIPK1-IN-32 (0.625-2.5 μM, 8 h) 有效地抑制了 LPS (MS-X91298) 诱导的 RIPK1/NF-κB/MAPK 通路的激活。

ELISA Assay

Cell Line: LPS-stimulated RAW 264.7 macrophages
Concentration: 0.625, 1.25, 2.5 μM
Incubation Time: 8 h, including 1 μg/mL LPS for 6 hours
Result: Significantly diminished the contents of IL-6 and TNF-α.

Western Blot Analysis

Cell Line: LPS-stimulated RAW 264.7 macrophages
Concentration: 0.625, 1.25, 2.5 μM
Incubation Time: 8 h, including 1 μg/mL LPS for 6 hours
Result: Resulted in notable decreases in the levels of RIPK1, p-p65, and p-IκB suggesting an inhibition of NF-κB signaling.
Found to lower the protein levels of p-p38, p-ERK, and p-JNK which aligns with the suppression of MAPK signaling.
体内研究
(In Vivo)

RIPK1-IN-32 (Compound 12) (1.25-5 mg/kg, i.v., 单次给药) 对 LPS 诱导的脓毒症小鼠的肝、肺和肾损伤提供了较大的保护性。

Animal Model: LPS injection into the tail vein to create a sepsis model established in Male BALB/c mice (18-20 g)
Dosage: 1.25, 2.5 and 5 mg/kg
Administration: Intravenous injection (i.v.), single dose
Result: Markedly alleviated LPS-induced ALI.
Decreased the serum levels of ALT and AST.
Significantly diminished the contents of IL-6 and TNF-α.
Attenuated the damage to lung tissue and markedly lessened the pathological alterations noted in the kidneys subsequent.
Decreased in liver concentrations of RIPK1, p-p65, P-IκB, p-p38, p-ERK, and p-JNK.

化学信息

分子量 754.05
分子式 C42H59NO7S2

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础