Pim-1 kinase inhibitor 2

Pim-1 kinase inhibitor 2 是一种对人源 PIM-1 激酶具有抑制作用的抑制剂(IC50 为 0.63 μM),其对癌细胞的选择性远高于正常细胞,可通过诱导细胞凋亡(apoptosis)、提高活化型 caspase-3 水平、上调 BAX 表达、下调 Bcl-2 表达并提升 Bax/Bcl-2 比值,从而抑制癌细胞增殖并诱导细胞周期停滞,可用于前列腺癌、肝细胞癌和乳腺癌的相关研究。
产品编号: MS-S22439 纯度: 99.91% CAS No.: 2543624-91-3 分子式: C24H14N4O3 分子量: 406.39
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
询价
50mg
询价
询价
100mg
询价
询价

产品描述

Pim-1 kinase inhibitor 2 是一种对人源 PIM-1 激酶具有抑制作用的抑制剂(IC50 为 0.63 μM),其对癌细胞的选择性远高于正常细胞,可通过诱导细胞凋亡(apoptosis)、提高活化型 caspase-3 水平、上调 BAX 表达、下调 Bcl-2 表达并提升 Bax/Bcl-2 比值,从而抑制癌细胞增殖并诱导细胞周期停滞,可用于前列腺癌、肝细胞癌和乳腺癌的相关研究。

生物实验数据

生物活性 Pim-1 kinase inhibitor 2 is an inhibitor of human PIM-1 kinase with an IC50 of 0.63 μM that exhibits markedly higher selectivity for cancer cells than for normal cells, and it induces apoptosis, increases activated caspase-3 levels, upregulates BAX expression, downregulates Bcl-2 expression, and elevates the Bax/Bcl-2 ratio, thereby inhibiting cancer cell proliferation and inducing cell cycle arrest, and it can be used for research on prostate cancer, hepatocellular carcinoma, and breast cancer.
IC50 & Target

human PIM1

0.63 μM (IC50)

Caspase 3

 

Bax

 

Bcl-2

 

体外研究
(In Vitro)

Pim-1 kinase inhibitor 2 (化合物 13) (24 h) 可强效抑制 PC3、HepG2 和 MCF-7 癌细胞的增殖,其 IC50 值分别为 4.82 μM、5.19 μM 和 16.33 μM,且相较于正常 WI-38 细胞,对癌细胞具有高选择性。
Pim-1 kinase inhibitor 2 可强效抑制 PIM-1 激酶,其 IC50 为 0.63 μM,在 10 μM 浓度下的抑制率达 76.43%。
Pim-1 kinase inhibitor 2 (1.96 μM; 24 h) 可诱导 PC3 细胞发生 G2/M 期阻滞,并增加凋亡 Pre-G1 期细胞群。
Pim-1 kinase inhibitor 2 (1.96 μM; 24 h) 可诱导 PC3 细胞发生凋亡,总凋亡细胞占比为 19.64%。
Pim-1 kinase inhibitor 2 可将 PC3 细胞中活化 caspase-3 的水平提升至 352.9 Pg/mL,表明其可诱导细胞凋亡。
Pim-1 kinase inhibitor 2 (24 h) 可上调 PC3 细胞中的 BAX、下调 Bcl-2,并将 BAX/Bcl-2 比值提升至 115.65,从而促进细胞凋亡。

Cell Cycle Analysis

Cell Line: human prostate carcinoma PC3 cells
Concentration: 1.96 μM
Incubation Time: 24 h
Result: Reduced the proportion of PC3 cells in G0-G1 phase to 33.72% and S phase to 34.29%.
Increased the proportion of PC3 cells in G2/M phase to 31.99% and Pre-G1 (apoptotic) phase to 19.64%, compared to control cells (54.77% G0-G1, 36.41% S, 8.82% G2/M, 1.76% Pre-G1).

Apoptosis Analysis

Cell Line: human prostate carcinoma PC3 cells
Concentration: 2.04 μM
Incubation Time: 24 h
Result: Increases active caspase-3 levels in PC3 cells to 352.9 Pg/mL, indicating induction of apoptosis.
性状 固体
颜色 brownish yellow

化学信息

分子量 406.39
分子式 C24H14N4O3
CAS No. 2543624-91-3

储存&溶解度

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 12.5 mg/mL (30.76 mM; 超声助溶 (<60°C); 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM2.4607 mL12.3035 mL24.6069 mL61.5173 mL
5 mM0.4921 mL2.4607 mL4.9214 mL12.3035 mL
10 mM0.2461 mL1.2303 mL2.4607 mL6.1517 mL
15 mM0.1640 mL0.8202 mL1.6405 mL4.1012 mL
20 mM0.1230 mL0.6152 mL1.2303 mL3.0759 mL
25 mM0.0984 mL0.4921 mL0.9843 mL2.4607 mL
30 mM0.0820 mL0.4101 mL0.8202 mL2.0506 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础