JF-NP-26 是 Raseglurant 的无活性光笼衍生物,也是第一个光笼 mGlu5 受体负性变构调节剂,可在可见光波段 (405 nm) 用光脉冲激发,并在自由行为动物的炎症性和神经病理性疼痛模型中诱导光依赖性缓解疼痛作用。
产品编号: MS-S20439 CAS No.: 2341841-03-8 分子式: C30H28FN3O4 分子量: 513.56
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

JF-NP-26 是 Raseglurant 的无活性光笼衍生物,也是第一个光笼 mGlu5 受体负性变构调节剂,可在可见光波段 (405 nm) 用光脉冲激发,并在自由行为动物的炎症性和神经病理性疼痛模型中诱导光依赖性缓解疼痛作用。

生物实验数据

生物活性 JF-NP-26 is an inactive photocaged derivative of Raseglurant and the first photocaged mGlu5 receptor negative allosteric modulator, which can be activated by light pulses in the visible range (405 nm) and induces light-dependent pain relief in inflammatory and neuropathic pain models in freely behaving animals.
IC50 & Target

mGlu5 Receptor

 

体外研究
(In Vitro)

The authors assessed the JF-NP-26-mediated negative allosteric modulation of mGlu5 receptor-induced responses to the orthosteric agonist quisqualate, by using an inositol phosphate (IP) accumulation assay. while JF-NP-26 didn’t show activity in dark conditions, its negative allosteric modulator (NAM) activity is rescued upon 405 nm visible light illumination (pIC50=7.1).
Agonist challenge induced a robust mGlu5 receptor-mediated intracellular calcium rise both in dark and under 405 nm illumination, which was blocked by raseglurant. JF-NP-26 is unable to restrain agonist-mediated signalling in dark conditions, it abolished mGlu5 receptor-mediated intracellular calcium accumulation upon 405 nm irradiation, thus demonstrating a light-dependent negative allosteric modulator activity.

体内研究
(In Vivo)

JF-NP-26 (10 mg/kg; i.p.; irradiated at 405 nm (or dark) for 5 min) significantly increased pain thresholds in CCI mice only after thalamic irradiation.
JF-NP-26 (10 mg/kg; i.p.; at 405 nm light (or dark) for 5 min) shows light-dependent analgesic efficacy in neuropathic pain.
Systemic administration and in vivo photoactivation of JF-NP-26 does not impair memory in mouse.

Animal Model: Adult male C57BL/6J mice weighing 20-25 g (chronic constriction injury (CCI) model)
Dosage: 10 mg/kg
Administration: I.p.; irradiated at 405 nm (or dark) for 5 min
Result: Significantly increased pain thresholds in CCI mice only after thalamic irradiation.
Animal Model: Formalin animal model of pain adult male CD-1 mice
Dosage: 10 mg/kg
Administration: I.p.; at 405 nm light (or dark) for 5 min
Result: Unable to promote antinociception in dark conditions, it elicited antinociception following direct hind paw irradiation both at phase I (5 min after formalin injection in the hind paw) and phase II (20–30 min after formalin injection).

化学信息

分子量 513.56
分子式 C30H28FN3O4
CAS No. 2341841-03-8

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础