MX1013

Synonyms: CV1013; Z-VD-FMK
MX1013 是一种具有抗细胞凋亡活性的有效不可逆二肽 caspase 抑制剂,可抑制重组人 caspase 3,IC50 为 30 nM。
产品编号: MS-R92105 纯度: 95.04% CAS No.: 582316-00-5 分子式: C18H23FN2O6 分子量: 382.38
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
3-5 天
100mg
询价
3-5 天
200mg
询价
询价
500mg
询价
询价
(0.1 - 0.2mg)
询价
询价

产品描述

MX1013 是一种具有抗细胞凋亡活性的有效不可逆二肽 caspase 抑制剂,可抑制重组人 caspase 3,IC50 为 30 nM。

生物实验数据

生物活性 MX1013 is a potent and irreversible dipeptide caspase inhibitor with anti-apoptotic activity that inhibits recombinant human caspase 3 with an IC50 of 30 nM.
IC50 & Target

Caspase

 

体外研究
(In Vitro)

MX1013 inhibits caspases 1, 3, 6, 7, 8, and 9, with IC50 values ranging from 5 to 20 nm. MX1013 is selective for caspases, and is a poor inhibitor of noncaspase proteases, such as cathepsin B, calpain I, or Factor Xa (IC50 values >10 μm).
MX1013 inhibits three key markers of apoptosis: the proteolytic maturation of caspase 3, the caspase-mediated cleavage of PARP, and the fragmentation of genomic DNA.

Cell Proliferation Assay

Cell Line: Jurkat T-lymphocytes
Concentration: 0, 0.05, 0.1, 0.25, 0.5 μM
Incubation Time: Preincubated for 2 h
Result: Neither caspase 3 processing nor PARP cleavage could be detected at 0.5 μM. At concentrations of 0.05 μM, caspase 3 processing and PARP cleavage were still markedly reduced.
体内研究
(In Vivo)

MX1013 is an effective antiapoptotic agent in vivo. MX1013 not only inhibits local tissue apoptosis, but also can protect animals against its lethal effects.

Animal Model: Female ND4 Swiss Webster mice (16.5-21 g)
Dosage: 0, 0.25, 1, 10 mg/kg (formulated in an aqueous vehicle containing 50 mm Tris-HCl, pH 8.0)
Administration: Injected i.v.
Result: The lowest dose of 0.25 mg/kg protected 66% of the mice from the lethal effects of anti-Fas antibody at the 3 h time point, and 1 and 10 mg/kg dose protected 100% of the mice at the 3 h time point.
性状 固体
颜色 White to off-white

化学信息

分子量 382.38
分子式 C18H23FN2O6
CAS No. 582316-00-5
别名 CV1013; Z-VD-FMK

储存&溶解度

储存方式
Powder -20°C 3 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 100 mg/mL (261.52 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM2.6152 mL13.0760 mL26.1520 mL65.3800 mL
5 mM0.5230 mL2.6152 mL5.2304 mL13.0760 mL
10 mM0.2615 mL1.3076 mL2.6152 mL6.5380 mL
15 mM0.1743 mL0.8717 mL1.7435 mL4.3587 mL
20 mM0.1308 mL0.6538 mL1.3076 mL3.2690 mL
25 mM0.1046 mL0.5230 mL1.0461 mL2.6152 mL
30 mM0.0872 mL0.4359 mL0.8717 mL2.1793 mL
40 mM0.0654 mL0.3269 mL0.6538 mL1.6345 mL
50 mM0.0523 mL0.2615 mL0.5230 mL1.3076 mL
60 mM0.0436 mL0.2179 mL0.4359 mL1.0897 mL
80 mM0.0327 mL0.1634 mL0.3269 mL0.8172 mL
100 mM0.0262 mL0.1308 mL0.2615 mL0.6538 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础