TRC160334 是一种缺氧诱导因子 (HIF) 羟化酶抑制剂,可用于缺血/再灌注损伤的研究。
产品编号: MS-R91610 纯度: 98.22% CAS No.: 1293289-69-6 分子式: C14H15N3O5S 分子量: 337.35
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
询价
50mg
询价
询价
100mg
询价
询价

产品描述

TRC160334 是一种缺氧诱导因子 (HIF) 羟化酶抑制剂,可用于缺血/再灌注损伤的研究。

生物实验数据

生物活性 TRC160334 is a hypoxia-inducible factor (HIF) hydroxylase inhibitor that can be used for the study of ischemia/reperfusion injury.
IC50 & Target

HIF hydroxylase

体外研究
(In Vitro)

TRC160334 (100~400 μΜ; 4 hours; Hep3B cells) results in dose-dependent stabilization of nuclear HIF-1.
TRC160334 (75~300 μM; 4 hours; Hep3B cells) results in dose-dependent transcriptional activation of HIF-1. TRC160334 shows a dose-dependent expression of HIF target genes such as EPO and adrenomedullin.

Western Blot Analysis

Cell Line: Hep3B cells
Concentration: 100~400 μΜ
Incubation Time: 4 hours
Result: Resulted in dose-dependent stabilization of nuclear HIF-1.
体内研究
(In Vivo)

TRC160334 (0.1 and 0.3 mg/kg; i.p.) significantly reduces serum creatinine and blood urea nitrogen.
TRC160334 (0.3 and 0.6 mg/kg; i.p.) shows reducing trends for acute tubular necrosis.
TRC160334 significantly reduces the rise in electrolyte excretion dose dependently. Preischemic treatment with TRC160334 results in a pronounced induction of HSP70 in kidneys by 6 hours while postischemic treatment with TRC160334 results in a pronounced induction of HSP70 in kidneys by 12 hours as compared with the respective vehicle control.

Animal Model: Sprague-Dawley male rats (250–300 g)
Dosage: 0.1 and 0.3 mg/kg
Administration: I.p.
Result: Significantly reduced serum creatinine and blood urea nitrogen.
Animal Model: Sprague-Dawley male rats (250–300 g)
Dosage: 0.3 and 0.6 mg/kg
Administration: I.p.
Result: Showed reducing trends for acute tubular necrosis.
性状 固体
颜色 Off-white to light yellow

化学信息

分子量 337.35
分子式 C14H15N3O5S
CAS No. 1293289-69-6

储存&溶解度

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 25 mg/mL (74.11 mM; 超声助溶 (<80°C); 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM2.9643 mL14.8214 mL29.6428 mL74.1070 mL
5 mM0.5929 mL2.9643 mL5.9286 mL14.8214 mL
10 mM0.2964 mL1.4821 mL2.9643 mL7.4107 mL
15 mM0.1976 mL0.9881 mL1.9762 mL4.9405 mL
20 mM0.1482 mL0.7411 mL1.4821 mL3.7054 mL
25 mM0.1186 mL0.5929 mL1.1857 mL2.9643 mL
30 mM0.0988 mL0.4940 mL0.9881 mL2.4702 mL
40 mM0.0741 mL0.3705 mL0.7411 mL1.8527 mL
50 mM0.0593 mL0.2964 mL0.5929 mL1.4821 mL
60 mM0.0494 mL0.2470 mL0.4940 mL1.2351 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础