XMU-MP-2 是一种选择性 BRK/PTK6 抑制剂(IC50 为 5.4 nM),可抑制 BRK 阳性乳腺癌增殖并诱导凋亡 (apoptosis),可用于乳腺癌相关研究。
产品编号: MS-R83451 纯度: 99.29% CAS No.: 2031152-10-8 分子式: C32H33F3N8O2 分子量: 618.65
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
3-5 天
5mg
询价
询价
10mg
询价
询价
50mg
询价
询价

产品描述

XMU-MP-2 是一种选择性 BRK/PTK6 抑制剂(IC50 为 5.4 nM),可抑制 BRK 阳性乳腺癌增殖并诱导凋亡 (apoptosis),可用于乳腺癌相关研究。

生物实验数据

生物活性 XMU-MP-2 is a selective BRK/PTK6 inhibitor with an IC50 of 5.4 nM that inhibits the proliferation of BRK-positive breast cancer and induces apoptosis, and can be used in breast cancer-related research.
体外研究
(In Vitro)

XMU-MP-2 (10-5000 nM; 4-48 h) 可抑制 BRK 转化的 Ba/F3 细胞增殖,其 IC50 为 29.7 nM,阻断 BRK 介导的信号通路,并诱导剂量依赖性凋亡。
XMU-MP-2 (50-5000 nM; 4-48 h) 对 BRKT264M 转化的 Ba/F3 细胞的效力显著降低 (IC50 = 340.4 nM)。
XMU-MP-2 (50-5000 nM; 4-48 h) 可强效抑制 BRKY447F 转化的 Ba/F3 细胞增殖,其 IC50 为 91.0 nM,阻断 BRK 介导的信号通路并诱导细胞凋亡。
XMU-MP-2 (50-10000 nM; 48 h) 可选择性抑制 BRK 阳性乳腺癌细胞系 (BT-474、BT-20、MCF7、T-47D) 的增殖。
XMU-MP-2 (0-16 μM; 0-3 days) 在 BT-474 细胞中与 HER2 抑制剂 CP-724714 (MS-F35799) 表现出强烈的协同抗增殖作用,在 MCF7 细胞中与 4-Hydroxytamoxifen (MS-L79048) 表现出强烈的协同抗增殖作用。

Cell Proliferation Assay

Cell Line: Wild-type BRK-transformed Ba/F3 cells; parental Ba/F3 cells
Concentration: 10-5000 nM (4 h for signaling inhibition); 50-5000 nM (24 h for apoptosis induction); range (48 h for antiproliferation)
Incubation Time: 4 h (signaling inhibition); 24 h (apoptosis induction); 48 h (antiproliferation)
Result: Inhibited proliferation of wild-type BRK-transformed Ba/F3 cells with an IC50 of 29.7 nM.
Showed minimal cytotoxicity against parental Ba/F3 cells.
At 500 nM and above, dose-dependently inhibited BRK Y342 autophosphorylation, and suppressed downstream phosphorylation of STAT3 Y705, STAT5 Y694, and ERK1/2 T202/Y204 (with weaker inhibition of ERK1/2 compared to STAT3/STAT5).
Induced significant apoptosis, evidenced by cleavage of caspase-3 and PARP, and increased Annexin-V-positive cells at concentrations of 500 nM and 5000 nM.

Cell Proliferation Assay

Cell Line: BRK-positive breast cancer cell lines BT-474, BT-20, MCF7, T-47D; BRK-negative MDA-MB-468 cells
Concentration: /
Incubation Time: 48 h
Result: Inhibited proliferation of BRK-positive breast cancer cells with IC50 values of 241.4 nM (BT-474), 356.4 nM (BT-20), 543.5 nM (MCF7), and 277.7 nM (T-47D).
Showed minimal antiproliferative potency against BRK-negative MDA-MB-468 cells (IC50 = 4302 nM).
体内研究
(In Vivo)

XMU-MP-2 (10-40 mg/kg; 静脉注射; 每日 1 次;14 天)在雌性 BALB/c 裸鼠的 BRK 阳性乳腺癌异种移植模型中显著抑制肿瘤生长并诱导肿瘤细胞凋亡。

Animal Model: Female BALB/c nu/nu mice (4–6 weeks old) were used to establish BRK-transformed Ba/F3 cell and BRK-positive breast cancer cell (BT-474) xenograft models
Dosage: 10 mg/kg, 20 mg/kg, 40 mg/kg
Administration: Intravenous injection, once daily for 14 consecutive days
Result: Dose-dependently reduced tumor volume and tumor weight without obvious body weight loss or systemic toxicity.
Markedly inhibited BRKY342 autophosphorylation and downstream STAT3/STAT5/Akt/ERK1/2 signaling.
Induced apoptosis in tumor tissues as confirmed by TUNEL staining, caspase-3/PARP cleavage and Annexin-V/PI assay.
性状 固体
颜色 Off-white to light brown

化学信息

分子量 618.65
分子式 C32H33F3N8O2
CAS No. 2031152-10-8

储存&溶解度

体内实验配方
10% DMSO+90% Saline: < 10 mg/mL (16.16 mM), Lower concentrations may be soluble, but exact solubility limit is unknown.
10% DMSO+40% PEG300+ 5% Tween 80 + 45% Saline: 10 mg/mL (16.16 mM), Solution.
请按顺序添加溶剂,在添加下一种溶剂之前,尽可能使溶液澄清。如有必要,可通过加热、超声、涡旋处理进行溶解。工作液建议现配现用。以上配方仅供参考,体内配方并不是绝对的,请根据不同情况进行调整。
储存方式
Powder -20°C 3 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 50 mg/mL (80.82 mM; 超声加热助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM1.6164 mL8.0821 mL16.1642 mL40.4106 mL
5 mM0.3233 mL1.6164 mL3.2328 mL8.0821 mL
10 mM0.1616 mL0.8082 mL1.6164 mL4.0411 mL
15 mM0.1078 mL0.5388 mL1.0776 mL2.6940 mL
20 mM0.0808 mL0.4041 mL0.8082 mL2.0205 mL
25 mM0.0647 mL0.3233 mL0.6466 mL1.6164 mL
30 mM0.0539 mL0.2694 mL0.5388 mL1.3470 mL
40 mM0.0404 mL0.2021 mL0.4041 mL1.0103 mL
50 mM0.0323 mL0.1616 mL0.3233 mL0.8082 mL
60 mM0.0269 mL0.1347 mL0.2694 mL0.6735 mL
80 mM0.0202 mL0.1010 mL0.2021 mL0.5051 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础