Piperacillin hydrate

Synonyms: Pipracil hydrate
Piperacillin hydrate 是一种半合成的广谱 β-内酰胺类抗生素,通过青霉素结合蛋白对革兰阴性菌和部分革兰阳性菌具有较强的杀菌活性,且最常与 β-内酰胺酶抑制剂 Tazobactam (MS-D97689) 联合使用。
产品编号: MS-R61756 CAS No.: 66258-76-2 分子式: C23H29N5O8S 分子量: 535.57
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Piperacillin hydrate 是一种半合成的广谱 β-内酰胺类抗生素,通过青霉素结合蛋白对革兰阴性菌和部分革兰阳性菌具有较强的杀菌活性,且最常与 β-内酰胺酶抑制剂 Tazobactam (MS-D97689) 联合使用。

生物实验数据

生物活性 Piperacillin hydrate is a semisynthetic broad-spectrum β-lactam antibiotic that exerts potent bactericidal activity against Gram-negative bacteria and some Gram-positive bacteria through penicillin-binding proteins, and it is most commonly used in combination with the β-lactamase inhibitor Tazobactam (MS-D97689).
体外研究
(In Vitro)

Piperacillin (12.5 μg/mL, 24h) hydrate 对铜绿假单胞菌、粘质沙雷氏菌、大肠埃希菌、克雷伯氏菌和肠杆菌分别有 92%、82%、73%、61% 和 42% 的抑制作用,变形杆菌属大部分对其极敏感。大量接种时 Piperacillin hydrate 不能抑制革兰阴性杆菌的生长 (最低抑菌浓度 > 25 μg/mL)。

体内研究
(In Vivo)

Piperacillin (100 mg/kg, 静脉注射, 一日四次, 5 天) hydrate 联合 Tazobactam (MS-D97689) (12.5 mg/kg, 静脉注射, 一日四次, 5 天) 可延长肺炎克雷伯菌低接种量小鼠的生存时间。

Animal Model: BALB/c low inoculum model of K. pneumoniae, KEN-11 strain.
Dosage: 100 mg/kg
Administration: Intravenous injection (i.v.), 4 times a day, 5 d, in combination with Tazobactam (12.5 mg/kg, i.v., 4 times a day, 5 d)
Result: Enabled all mice survived whereas all control mice died by 5 d, decreased the number of bacteria in lungs compared with control group.
Observed no bacteria in the blood of most mice (except for two mice at the early phase) while bacteria were observed in the blood of control group.
Observed few inflammatory cells in the alveoli whereas an influx of numerous inflammatory cells were observed in the control group.

化学信息

分子量 535.57
分子式 C23H29N5O8S
CAS No. 66258-76-2
别名 Pipracil hydrate

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础