CEP-40783

Synonyms: RXDX-106
CEP-40783是一种高效、选择性且具有口服活性的AXL和c-Met抑制剂,其IC50值分别为7 nM和12 nM。
产品编号: MS-R45049 纯度: 99.61% CAS No.: 1437321-24-8 分子式: C31H26F2N4O6 分子量: 588.56
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
3-5 天
100mg
询价
3-5 天
200mg
询价
3-5 天
500mg
询价
询价
1g
询价
询价
(0.1 - 0.2mg)
询价
询价

产品描述

CEP-40783是一种高效、选择性且具有口服活性的AXL和c-Met抑制剂,其IC50值分别为7 nM和12 nM。

生物实验数据

生物活性 CEP-40783 is a potent, selective, and orally active inhibitor of AXL and c-Met with IC50 values of 7 nM and 12 nM, respectively.
IC50 & Target Axl:7 nM (Biochemical), c-Met:12 nM (Biochemical), Mer:29 nM (Biochemical), Tyro3:19 nM (Biochemical)
体外研究
(In Vitro)

In AXL-transfected 293GT cells, CEP-40783 is 27-fold more active compared to recombinant enzyme with an IC50 value of 0.26 nM. CEP-40783 also demonstrates superior activity against c-Met in GTL-16 cells (IC50=6 nM). The increased inhibitory activity of CEP-40783 in cells could be attributed to its extended residence time on both AXL and c-Met, consistent with a Type II mechanism. CEP-40783 shows high kinome selectivity against 298 kinases with an S90 of 0.04 (fraction of kinases showing >90% inhibition at 1 μM).

体内研究
(In Vivo)

CEP-40783 shows dose- and time-dependent inhibition of AXL phosphorylation using NCI-H1299 NSCL xenografts with 80% target inhibition at 0.3 mg/kg 6 h post dose and complete target inhibition to >90% inhibition at 1 mg/kg between 6-24 h, while a 10 mg/kg po dose resulted in complete AXL inhibition up to 48 h post dosing. In 3/5 (60%) of the tumor models, CEP-40783 shows in vivo efficacy, including tumor regressions, significantly superior to that achieved with an optimal regimen of paclitaxel. In 4/4 (100%) of the erlotinib-insensitive tumor models, CEP-40783 demonstrates significant efficacy (66 to 118% TGI) compared to the control group at the 30 mg/kg dose. Additionally, CEP-40783 in combination with erlotinib demonstrate superior anti-tumor efficacy compared to CEP-40783 and erlotinib single agents in the one erlotinib-sensitive model evaluated. CEP-40783 as a single agent and in combination with erlotinib are well tolerated.

性状 固体
颜色 White to off-white

化学信息

分子量 588.56
分子式 C31H26F2N4O6
CAS No. 1437321-24-8
别名 RXDX-106

储存&溶解度

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 2 years
-20°C 1 year
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 3.12 mg/mL (5.30 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM1.6991 mL8.4953 mL16.9906 mL42.4766 mL
5 mM0.3398 mL1.6991 mL3.3981 mL8.4953 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 2 years; -20°C, 1 year。-80°C储存时,请在2年内使用, -20°C储存时,请在1年内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础