PROTAC SAMHD1 Degrader-1

PROTAC SAMHD1 Degrader-1 是一种口服有效的靶向 SAMHD1 PROTAC 降解剂,对 SAMHD1 dNTP 水解酶的 IC50 为 6.3 μM,可在细胞内与 SAMHD1 结合并介导其降解且脱靶效应较低,能抑制促炎细胞因子生成、干扰炎症反应级联放大过程,延缓肺纤维化进展并发挥肺组织保护作用,可用于肺纤维化相关研究(粉色:SAMHD1 配体 (MS-R67781);蓝色:DCAF1 配体 (MS-I57842);黑色:连接子 (MS-J92528))。
PROTAC SAMHD1 Degrader-1
产品编号: MS-Q97923 分子式: C54H67ClFN13O8 分子量: 1080.64
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

PROTAC SAMHD1 Degrader-1 是一种口服有效的靶向 SAMHD1 PROTAC 降解剂,对 SAMHD1 dNTP 水解酶的 IC50 为 6.3 μM,可在细胞内与 SAMHD1 结合并介导其降解且脱靶效应较低,能抑制促炎细胞因子生成、干扰炎症反应级联放大过程,延缓肺纤维化进展并发挥肺组织保护作用,可用于肺纤维化相关研究(粉色:SAMHD1 配体 (MS-R67781);蓝色:DCAF1 配体 (MS-I57842);黑色:连接子 (MS-J92528))。

生物实验数据

生物活性 PROTAC SAMHD1 Degrader-1 is an orally active SAMHD1-targeting PROTAC degrader with an IC50 of 6.3 μM against SAMHD1 dNTP hydrolase that binds to and mediates the degradation of SAMHD1 in cells with low off-target effects, inhibits proinflammatory cytokine production, interferes with the cascade amplification of inflammatory responses, delays the progression of pulmonary fibrosis, exerts protective effects on lung tissue, and can be used for research related to pulmonary fibrosis (pink: SAMHD1 ligand (MS-R67781); blue: DCAF1 ligand (MS-I57842); black: linker (MS-J92528)).
体外研究
(In Vitro)

PROTAC SAMHD1 Degrader-1 (compound NP12) (0.15-10.0 μM; 6-48 h) 可在 THP-1 细胞中诱导 SAMHD1 呈剂量和时间依赖性降解,DC50 为 1.2 μM。
PROTAC SAMHD1 Degrader-1 (10 μM; 24 h pretreatment) 可提高野生型 THP-1 细胞对 Ara-C 的敏感性,将 Ara-C 的 IC50 从 5.4 μM 降至 1.1 μM,证实其可在细胞内抑制 SAMHD1 的活性。
PROTAC SAMHD1 Degrader-1 (1-10 μM; 1 h pretreatment) 可以浓度依赖方式抑制 RAW264.7 巨噬细胞中 LPS (MS-X54539) 诱导的促炎细胞因子 (IL-1β、IL-6、TNF-α) 产生,干扰细胞因子的转录、翻译与分泌。

Western Blot Analysis

Cell Line: THP-1 human acute monocytic leukemia cells
Concentration: 0.15, 0.3, 0.6, 1.2, 2.5, 5.1, 10.0 μM
Incubation Time: 6 h, 24 h, 48 h
Result: Induced 47.9%, 74.4%, and 91.8% SAMHD1 degradation at 1 μM, 2.5 μM, and 5 μM for 48 h, respectively.
Showed dose-dependent degradation across 0.15-10.0 μM for 48 h, with a DC50 of 1.2 μM.
Achieved 66% degradation at 24 h and maximum 89% degradation at 48 h with 5 μM treatment.
Maintained suppressed SAMHD1 levels for at least 24 h post-withdrawal of 5 μM treatment, with levels returning to near initial levels by 48 h post-withdrawal.
体内研究
(In Vivo)

PROTAC SAMHD1 Degrader-1 (20-80 mg/kg;灌胃;每日一次;连续 14 天) 可诱导小鼠肺组织中 SAMHD1 呈剂量依赖性降解,延缓 Bleomycin (MS-R86735) 诱导的肺纤维化进展,减轻肺组织损伤与胶原沉积,并降低促炎/促纤维化细胞因子水平。

Animal Model: C57BL/6 (male, 6-8 weeks old, 18-22 g, intratracheal bleomycin-induced pulmonary fibrosis)
Dosage: 20 mg/kg; 40 mg/kg; 80 mg/kg
Administration: i.g.; daily; 14 days
Result: Showed gradual body weight recovery from day 9 onward.
Reduced bleomycin-induced lung tissue damage, including alleviated alveolar atrophy/collapse, bronchial wall thickening, and inflammatory cell infiltration.
Decreased collagen fiber deposition in a dose-dependent manner.
Significantly downregulated lung tissue expression of α-smooth muscle actin and fibronectin in a dose-dependent manner.
Reduced serum and bronchoalveolar lavage fluid levels of proinflammatory and profibrotic cytokines (IL-1β, IL-6, TGF-β1), with the 80 mg/kg dose showing the most pronounced effects.
Reduced lung tissue SAMHD1 protein levels to 80.7% (20 mg/kg), 58.3% (40 mg/kg), and 21.9% (80 mg/kg) of the control group, demonstrating dose-dependent degradation.

化学信息

分子量 1080.64
分子式 C54H67ClFN13O8

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础