MPP dihydrochloride

MPP dihydrochloride 是一种强效的选择性 ER(雌激素受体)调节剂,可诱导子宫内膜癌和 oLE 细胞凋亡、逆转 β-雌激素的积极作用,并在体内对小鼠子宫 ERalpha 表现出激动剂与拮抗剂的混合作用。
产品编号: MS-Q75820 纯度: 99.54% CAS No.: 911295-24-4 分子式: C29H33Cl2N3O3 分子量: 542.50
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
3-5 天
100mg
询价
询价
200mg
询价
询价
500mg
询价
询价

产品描述

MPP dihydrochloride 是一种强效的选择性 ER(雌激素受体)调节剂,可诱导子宫内膜癌和 oLE 细胞凋亡、逆转 β-雌激素的积极作用,并在体内对小鼠子宫 ERalpha 表现出激动剂与拮抗剂的混合作用。

生物实验数据

生物活性 MPP dihydrochloride is a potent selective ER (estrogen receptor) modulator that induces apoptosis in endometrial cancer and oLE cells, reverses the positive effects of β-estrogen, and exhibits mixed agonist and antagonist effects on mouse uterine ERalpha in vivo.
IC50 & Target

ERα

 

ERβ

 

体外研究
(In Vitro)

MPP dihydrochloride (1、5、10、25、50 和 100 μM;24 小时) 在 RL95-2 细胞中降低细胞活力,IC50 值为 20.01 μM。
MPP dihydrochloride 在浓度为 10 μM 时在 RL95-2 细胞中表现出抗增殖活性。
MPP dihydrochloride (20 μM;24 h) 降低磷酸化ERα,但它不会改变 Akt 的磷酸化。MPP dihydrochloride 降低 p-ERα/ERα 的比率。

Cell Viability Assay

Cell Line: RL95-2 endometrium cancer cells
Concentration: 1, 5, 10, 25, 50 and 100 µM
Incubation Time: 24 hours
Result: The treatment with 25 µM, 50 µM and 100 µM for 24 h decreased cell viability significantly. However, cell viability was not significantly changed by MPP dihydrochloride at concentration below 25 µM.

Cell Proliferation Assay

Cell Line: RL95-2 cell
Concentration: 10, 15, 20 and 25 µM
Incubation Time: 72 hours
Result: Showed antiproliferative activity at a concentration of 10 μM.

Western Blot Analysis

Cell Line: RL95-2 cell line
Concentration: 20 µM
Incubation Time: 24 hours
Result: Reduced the phosphorylation of ERα, while it did not alter the phosphorylation of Akt. Reduced the ratio of p-ERα/ERα compared to the control group.
体内研究
(In Vivo)

MPP dihydrochloride (20 μg/kg 或 200 μg/kg ) 导致前脉冲抑制百分比 (PPI) 呈剂量依赖性衰减。

Animal Model: Male C57BL/6N mice at the age of 9-10 weeks
Dosage: Low dose (20 μg/kg body weight) or high dose (200 μg/kg body weight)
Administration: Administered subcutaneously (s.c.) injected; injection volume of 5 mL/kg; 60 min before PPI testing
Result: Led to a dose-dependent attenuation of percent PPI. Pretreatment with 200 μg/kg reduced the mean percent PPI scores by ~30%.
性状 固体
颜色 White to off-white

化学信息

分子量 542.50
分子式 C29H33Cl2N3O3
CAS No. 911295-24-4

储存&溶解度

储存方式

4°C, sealed storage, away from moisture

*In solvent: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 30 mg/mL (55.30 mM; 超声加热助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM1.8433 mL9.2166 mL18.4332 mL46.0829 mL
5 mM0.3687 mL1.8433 mL3.6866 mL9.2166 mL
10 mM0.1843 mL0.9217 mL1.8433 mL4.6083 mL
15 mM0.1229 mL0.6144 mL1.2289 mL3.0722 mL
20 mM0.0922 mL0.4608 mL0.9217 mL2.3041 mL
25 mM0.0737 mL0.3687 mL0.7373 mL1.8433 mL
30 mM0.0614 mL0.3072 mL0.6144 mL1.5361 mL
40 mM0.0461 mL0.2304 mL0.4608 mL1.1521 mL
50 mM0.0369 mL0.1843 mL0.3687 mL0.9217 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础