CRBN-6-5-5-VHL 是一种有效的选择性基于 von Hippel-Lindau E3 配体的 cereblon (CRBN) 降解剂,DC50 值为 1.5 nM,且对底物 IKZF1 和 IKZF3 的降解几乎没有影响(粉色:IKZF1 和 IKZF3 配体 (MS-Q68284);蓝色:VHL 配体 (MS-L68940);黑色:连接子 (MS-B57440))。
产品编号: MS-Q72972 纯度: 98.97% CAS No.: 2362575-45-7 分子式: C51H69N7O10S 分子量: 972.20
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
询价
25mg
询价
询价
50mg
询价
询价
100mg
询价
询价

产品描述

CRBN-6-5-5-VHL 是一种有效的选择性基于 von Hippel-Lindau E3 配体的 cereblon (CRBN) 降解剂,DC50 值为 1.5 nM,且对底物 IKZF1 和 IKZF3 的降解几乎没有影响(粉色:IKZF1 和 IKZF3 配体 (MS-Q68284);蓝色:VHL 配体 (MS-L68940);黑色:连接子 (MS-B57440))。

生物实验数据

生物活性 CRBN-6-5-5-VHL is a potent and selective von Hippel-Lindau E3 ligand-based cereblon (CRBN) degrader with a DC50 value of 1.5 nM, and it has little effect on the degradation of the substrates IKZF1 and IKZF3 (pink: IKZF1 and IKZF3 ligand (MS-Q68284); blue: VHL ligand (MS-L68940); black: linker (MS-B57440)).
IC50 & Target

Cereblon

1.5 nM (DC50)

体外研究
(In Vitro)

CRBN-6-5-5-VHL (0.001-10 μM,24 小时) 可诱导 MM1S 细胞中 CRBN 降解,在 1 μM 时诱导其完全降解。
CRBN-6-5-5-VHL (100 nM,96 小时) 通过阻止诱导 IKZF1 和 IKZF3 降解来保护或拯救 MM1S 细胞免受免疫调节亚胺类药物 (IMiD) 毒性。
CRBN-6-5-5-VHL (100 nM,24 小时) 在MM1S 细胞中降解 CRBN 依赖于由 VHL (E3 连接酶)、异质 PROTAC (降解剂) 和 CRBN (靶标) 组成的必需异质三元复合物。
CRBN-6-5-5-VHL (100 nM,4-72 小时) 在 MM1S 细胞中使 CRBN 水平低于 50% 持续超过 48 小时,表明具有可持续作用。

Cell Viability Assay

Cell Line: MM1S
Concentration: 100 nM
Incubation Time: 96 h
Result: Protect or rescue MM1S cells from IMiD toxicity by preventing induction of IKZF1 and IKZF3 degradation.

Western Blot Analysis

Cell Line: MM1S
Concentration: 0.001, 0.01, 0.1, 1, 10 μM
Incubation Time: 24 h
Result: No reduction of the VHL protein level was observed, however, CRBN levels were decreased.
Showed a negligible effect on the degradation of the neo-substrates IKZF1 and IKZF3.
Treatment with 1 µM for 24 hours induced complete degradation of CRBN, whereas for up to 10 µM no changes in the VHL protein levels were observed.

Western Blot Analysis

Cell Line: MM1S
Concentration: 100 nM
Incubation Time: 24 h
Result: Co-treatment of an excess of Pomalidomide (MS-Q68284) (POM) caused an impaired capability for CRBN degradation.
Co-treatment with VH298 (MS-K36535) abrogated CRBN degradation and depleted IKZF1 and IKZF3.
Genetic VHL knockdown prevented CRBN degradation.

Western Blot Analysis

Cell Line: MM1S
Concentration: 100 nM
Incubation Time: 4, 8, 24, 48, 72 h
Result: Had sustainable effects on MM1S cells, as CRBN levels below 50% were maintained for more than 48 h.
性状 固体
颜色 Light yellow to yellow

化学信息

分子量 972.20
分子式 C51H69N7O10S
CAS No. 2362575-45-7

储存&溶解度

储存方式

-20°C, sealed storage, away from moisture

*In solvent: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 113.33 mg/mL (116.57 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM1.0286 mL5.1430 mL10.2859 mL25.7149 mL
5 mM0.2057 mL1.0286 mL2.0572 mL5.1430 mL
10 mM0.1029 mL0.5143 mL1.0286 mL2.5715 mL
15 mM0.0686 mL0.3429 mL0.6857 mL1.7143 mL
20 mM0.0514 mL0.2571 mL0.5143 mL1.2857 mL
25 mM0.0411 mL0.2057 mL0.4114 mL1.0286 mL
30 mM0.0343 mL0.1714 mL0.3429 mL0.8572 mL
40 mM0.0257 mL0.1286 mL0.2571 mL0.6429 mL
50 mM0.0206 mL0.1029 mL0.2057 mL0.5143 mL
60 mM0.0171 mL0.0857 mL0.1714 mL0.4286 mL
80 mM0.0129 mL0.0643 mL0.1286 mL0.3214 mL
100 mM0.0103 mL0.0514 mL0.1029 mL0.2571 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础