PROTAC BET Degrader-16

PROTAC BET Degrader-16(Compound A10)是一种 BET PROTAC 降解剂,针对 BRD4 的 DC50 为 0.31 nM,相较于其他 BET 家族成员优先靶向 BRD4,可通过泛素-蛋白酶体系统降解 BRD2、BRD3 和 BRD4(该过程需要靶标结合与 CRBN E3 连接酶的募集),并可诱导细胞周期阻滞、促进细胞凋亡 (Apoptosis),对急性髓系白血病具有抗肿瘤活性(粉色: BET 靶蛋白配体;蓝色: Cereblon 配体 (MS-O60836);黑色: 连接子 (MS-E72815))。
产品编号: MS-Q66508 CAS No.: 2410947-65-6 分子式: C44H45F2N7O9S 分子量: 885.93
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

PROTAC BET Degrader-16(Compound A10)是一种 BET PROTAC 降解剂,针对 BRD4 的 DC50 为 0.31 nM,相较于其他 BET 家族成员优先靶向 BRD4,可通过泛素-蛋白酶体系统降解 BRD2、BRD3 和 BRD4(该过程需要靶标结合与 CRBN E3 连接酶的募集),并可诱导细胞周期阻滞、促进细胞凋亡 (Apoptosis),对急性髓系白血病具有抗肿瘤活性(粉色: BET 靶蛋白配体;蓝色: Cereblon 配体 (MS-O60836);黑色: 连接子 (MS-E72815))。

生物实验数据

生物活性 PROTAC BET Degrader-16 (Compound A10) is a BET PROTAC degrader with a DC50 of 0.31 nM against BRD4 that preferentially targets BRD4 over other BET family members, degrades BRD2, BRD3, and BRD4 via the ubiquitin-proteasome system in a process requiring target binding and CRBN E3 ligase recruitment, induces cell cycle arrest and promotes apoptosis (Apoptosis), and exhibits antitumor activity against acute myeloid leukemia (pink: BET target protein ligand; blue: Cereblon ligand (MS-O60836); black: linker (MS-E72815)).
IC50 & Target BRD4:0.31 nM (DC50)
体外研究
(In Vitro)

PROTAC BET Degrader-16 可直接与 BRD4 (BD1) 结合,其 IC50 为 3.0 nM。
PROTAC BET Degrader-16 (72 h) 可强效抑制 MV4-11 白血病细胞的增殖,其 IC50 值为 1.964 nM,而在 RAMOS 细胞中的活性较低。
PROTAC BET Degrader-16 (0.1-300 nM; 1-24 h) 可在 MV4-11 细胞中以时间和浓度依赖的方式高效且选择性降解 BRD2、BRD3 和 BRD4 (其中 BRD4 的 DC50 为 0.31 nM),其作用机制依赖于 BRD4 结合、CRBN 募集以及泛素-蛋白酶体系统。
PROTAC BET Degrader-16 (1-100 nM) 诱导 MV4-11 细胞出现剂量依赖性的 S 期阻滞。
PROTAC BET Degrader-16 (0.3-100 nM; 48 h) 处理 MV4-11 细胞 48 h 后可诱导浓度依赖性细胞凋亡,其活性显著高于 ABBV-075 (MS-X20474)。

Western Blot Analysis

Cell Line: MV4-11 cells
Concentration: 0.1-300 nM (concentration-dependent degradation); 100 nM (time-dependent degradation, complete degradation, mechanism studies)
Incubation Time: 24 h (concentration-dependent degradation, complete degradation, mechanism studies); 1, 2, 4, 8, 14, 24 h (time-dependent degradation)
Result: Induced nearly complete loss of BRD2, BRD3, and BRD4 protein at 100 nM for 24 h, with concurrent downregulation of c-Myc.
Exhibited a DC50 of 6.44 ± 0.18 nM for BRD2, 7.93 ± 0.73 nM for BRD3, and 0.31 ± 0.08 nM for BRD4.
Showed time-dependent degradation, with effects observed as early as 1 h post-treatment at 100 nM.
Abolished degradation completely when cells were pre-treated with ABBV-075, lenalidomide, MLN4924, MG132, or carfilzomib.
体内研究
(In Vivo)

PROTAC BET Degrader-16 (腹腔注射,每 2 天 1 次,持续 21 天,剂量为 2-6 mg/kg) 在 MV4-11 AML 异种移植模型中发挥剂量依赖性抗肿瘤作用。

Animal Model: Balb/c nude (4 to 5 weeks old; subcutaneous AML xenograft model)
Dosage: 2 mg/kg; 6 mg/kg
Administration: i.p.; every other day; 21 days
Result: Achieved 48.8% tumor growth inhibition (TGI) and significantly downregulated BRD4 and c-Myc protein expression in tumor tissue compared to vehicle control at 2 mg/kg.
Achieved 76.2% TGI, with a more pronounced reduction in c-Myc protein expression than the 2 mg/kg dose at 6 mg/kg.
Caused no significant body weight loss in treated mice.
Resulted in no significant changes in hepatic (ALT, AST), renal, or cardiac (CK-MB, LDH) toxicity biomarkers compared to vehicle control at both doses.

化学信息

分子量 885.93
分子式 C44H45F2N7O9S
CAS No. 2410947-65-6

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础