PROTAC CB1R Degrader-1

PROTAC CB1R Degrader-1 是一种强效且选择性的 CB1R PROTAC 降解剂,通过泛素-蛋白酶体系统 (UPS) 介导 CB1R 降解,在 MCF-7 细胞中的 DC50 为 3.37 μM,且对 CB2R 无影响,可降低 CB1R 相关下游信号通路 (p-AKT、p-ERK、BCL2 和 MCM5),从而抑制乳腺癌细胞增殖并诱导细胞凋亡 (apoptosis),可用于乳腺癌相关研究(粉色:CB1R 配体 (MS-G91895);蓝色:Cereblon 配体 (MS-V29738);黑色:连接子 (MS-J53679))。
PROTAC CB1R Degrader-1
产品编号: MS-Q65073 分子式: C35H28Cl3N9O5 分子量: 761.01
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

PROTAC CB1R Degrader-1 是一种强效且选择性的 CB1R PROTAC 降解剂,通过泛素-蛋白酶体系统 (UPS) 介导 CB1R 降解,在 MCF-7 细胞中的 DC50 为 3.37 μM,且对 CB2R 无影响,可降低 CB1R 相关下游信号通路 (p-AKT、p-ERK、BCL2 和 MCM5),从而抑制乳腺癌细胞增殖并诱导细胞凋亡 (apoptosis),可用于乳腺癌相关研究(粉色:CB1R 配体 (MS-G91895);蓝色:Cereblon 配体 (MS-V29738);黑色:连接子 (MS-J53679))。

生物实验数据

生物活性 PROTAC CB1R Degrader-1 is a potent and selective CB1R PROTAC degrader that mediates CB1R degradation via the ubiquitin-proteasome system (UPS) with a DC50 of 3.37 μM in MCF-7 cells and has no effect on CB2R, reduces CB1R-related downstream signaling pathways (p-AKT, p-ERK, BCL2, and MCM5), thereby inhibiting breast cancer cell proliferation and inducing apoptosis, and can be used for breast cancer-related research (pink: CB1R ligand (MS-G91895); blue: Cereblon ligand (MS-V29738); black: linker (MS-J53679)).
IC50 & Target

CB1R

 

Cereblon

 

体外研究
(In Vitro)

PROTAC CB1R Degrader-1 (Pro-CB8) (0.1-20 μM, 6-48 小时) 在 MCF-7 细胞中诱导 CB1R 显著降解,且呈剂量和时间依赖性 (DC50 = 3.37 μM),在 MDA-MB-231 细胞中也观察到 CB1R水平的显著降低,表明其具有更广泛的适用性。
PROTAC CB1R Degrader-1 (0-10 μM,6-48 小时) 可下调乳腺癌细胞 (包括 MCF-7 和 MDA-MB-231) 中关键的癌症相关蛋白 (p-AKT、p-ERK) 和基因 (BCL2、MCM5) 的表达。
PROTAC CB1R Degrader-1 (0-10 μM,48 小时) 可选择性地降低乳腺癌细胞 (MCF-7 和 MDA-MB-231) 的活力和增殖,同时不损伤健康的成纤维细胞,并诱导两种癌细胞系 (MCF-7 和 MDA-MB-231) 发生显著的细胞凋亡。
PROTAC CB1R Degrader-1 (10 μM) 在 3D 实验模型中导致 MCF-7 和 MDA-MB-231 肿瘤球体出现明显且持续的瓦解,此效应最早于第 3 天开始出现并在整个观察期内持续存在。

Western Blot Analysis

Cell Line: MCF-7 cells
Concentration: 10 μM
Incubation Time: 48 h
Result: Significantly reduced CB1R levels by approximately 80% at 10 μM.

Western Blot Analysis

Cell Line: MCF-7 cells
Concentration: 1, 2, 5, 10, and 20 μM
Incubation Time: 6, 12, 24, and 48 h
Result: Reduced CB1R levels in a time-dependent manner, with the most potent effect observed after 48 h.
significantly reduced CB1R protein levels, achieving approximately 75% degradation at 20 μM with a calculated degradation concentration (DC50 = 3.37 μM).

Western Blot Analysis

Cell Line: MDA-MB-231 cells
Concentration: 0.1, 1, and 10 μM
Incubation Time: 48 h
Result: Induced a significant reduction in CB1R levels, with a maximum decrease of approximately 90% at 10 μM.

Western Blot Analysis

Cell Line: MCF-7 cells
Concentration: 10 μM
Incubation Time: 6, 12, 24 and 48 h
Result: Markedly decreased levels of p-AKT and p-ERK by approximately 70%.
Decreased BAL2 levels in a time-dependent manner at 10 μM, with a 56% reduction after 48 h.

Real Time qPCR

Cell Line: MCF-7 cells
Concentration: 0.1, 1 and 10 μM
Incubation Time: 24 h
Result: Decreased MCM5 and BCL2 mRNA levels at 1 and 10 μM.

Cell Viability Assay

Cell Line: MCF-7 and fibroblast cells
Concentration: 0.1, 1, and 10 μM
Incubation Time: 48 h
Result: Decreased cell viability at 0.1, 1, and 10 μM in MCF-7 cells.
Showed no significant effect on fibroblast cells.

Cell Proliferation Assay

Cell Line: MCF-7 and MDA-MB-231 cells
Concentration: 0, 1, and 10 μM for MCF-7 cells; 0, 0.01, 0.1, 1, and 10 μM for MDA-MB-231 cells
Incubation Time: 48 h
Result: Decreased MCF-7 cell proliferation at 1, and 10 μM.
Decreased MDA-MB-231 cell proliferation at 1 and 10 μM.

Apoptosis Analysis

Cell Line: MCF-7 and MDA-MB-231 cells
Concentration: 10 μM for MCF-7 cells, 0.01, 0.1, 1, and 10 μM for MDA-MB-231 cells
Incubation Time: 48 h
Result: Resulted in a robust increase in apoptosis at 10 μM in MCF-7 cells.
Induced a dose-dependent marked increase in apoptosis in MDA-MB-231 cells at 1 and 10 μM.
体内研究
(In Vivo)

PROTAC CB1R Degrader-1 (5 mg/kg,腹腔注射,单次给药) 在小鼠体内表现出极低的脑组织渗透性,难以穿过血脑屏障。

化学信息

分子量 761.01
分子式 C35H28Cl3N9O5

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础