MS170 是一种有效的选择性 PROTAC AKT 降解剂,可消耗细胞总 AKT(T-AKT),DC50 值为 32 nM,并与 AKT1、AKT2 和 AKT3 结合,Kd 分别为 1.3 nM、77 nM 和 6.5 nM(粉色:Akt 靶蛋白配体;蓝色:Cereblon 配体 (MS-V29738);黑色:连接子 (MS-G22860))。
产品编号: MS-Q60369 纯度: 98.68% CAS No.: 2376136-61-5 分子式: C45H56ClN9O7 分子量: 870.44
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
3-5 天
5mg
询价
询价
10mg
询价
询价

产品描述

MS170 是一种有效的选择性 PROTAC AKT 降解剂,可消耗细胞总 AKT(T-AKT),DC50 值为 32 nM,并与 AKT1、AKT2 和 AKT3 结合,Kd 分别为 1.3 nM、77 nM 和 6.5 nM(粉色:Akt 靶蛋白配体;蓝色:Cereblon 配体 (MS-V29738);黑色:连接子 (MS-G22860))。

生物实验数据

生物活性 MS170 is a potent and selective PROTAC AKT degrader that depletes cellular total AKT (T-AKT) with a DC50 of 32 nM and binds to AKT1, AKT2, and AKT3 with Kd values of 1.3 nM, 77 nM, and 6.5 nM, respectively (pink: Akt target protein ligand; blue: Cereblon ligand (MS-V29738); black: linker (MS-G22860)).
IC50 & Target Akt1:1.3 nM (Kd), Akt2:77 nM (Kd), Akt3:6.5 nM (Kd)
体外研究
(In Vitro)

Cereblon (CRBN)-recruiting degrader MS170 is an effective AKT degrader without a ″hook effect″. MS170 selectively induces robust AKT protein degradation, inhibits downstream signaling, and suppresses cancer cell proliferation. MS170 concentration- and time-dependently induces AKT degradation through the ubiquitin-proteasome system (UPS).
MS170 (10 nM-10 μM) effectively inhibits the proliferation in multiple cancer cell lines.
MS170 (1 nM-10 μM) concentration-dependently depletes cellular total AKT (T-AKT) with the DC50 value of 32±18 nM.

Cell Proliferation Assay

Cell Line: BT474, PC3, and MDA-MB-468 cells
Concentration: 10 nM, 100 nM, 1 μM, 10 μM
Incubation Time: 5 days
Result: Inhibited the cell growth with GI50s of 0.7±0.2 μM, 7.4±2.2 μM, and 5.7±2.4 μM for BT474 cells, PC3 cells, and MDA-MB-468 cells, respectively.

Western Blot Analysis

Cell Line: BT474 cells
Concentration: 1 nM, 3 nM, 10 nM, 30 nM, 100 nM, 300 nM, 1 μM, 3 μM, and 10 μM
Incubation Time: 24 hours
Result: Potently induced AKT degradation.
体内研究
(In Vivo)

MS170 (a single intraperitoneal injection at a dose of 50 mg/kg) is bioavailable in mice via IP injection.

Animal Model: Male Swiss albino mice
Dosage: Single 50 mg/kg(Pharmacokinetic Analysis)
Administration: IP injection over 8 h
Result: Bioavailable in mouse PK studies. The Cmax is1.4 μM at 2 h.
性状 固体
颜色 Light yellow to yellow

化学信息

分子量 870.44
分子式 C45H56ClN9O7
CAS No. 2376136-61-5

储存&溶解度

储存方式

-20°C, protect from light

*In solvent: -80°C, 6 months; -20°C, 1 month (protect from light)

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 50 mg/mL (57.44 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM1.1488 mL5.7442 mL11.4884 mL28.7211 mL
5 mM0.2298 mL1.1488 mL2.2977 mL5.7442 mL
10 mM0.1149 mL0.5744 mL1.1488 mL2.8721 mL
15 mM0.0766 mL0.3829 mL0.7659 mL1.9147 mL
20 mM0.0574 mL0.2872 mL0.5744 mL1.4361 mL
25 mM0.0460 mL0.2298 mL0.4595 mL1.1488 mL
30 mM0.0383 mL0.1915 mL0.3829 mL0.9574 mL
40 mM0.0287 mL0.1436 mL0.2872 mL0.7180 mL
50 mM0.0230 mL0.1149 mL0.2298 mL0.5744 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (protect from light)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础