Suloctidil hydrochloride

Suloctidil hydrochloride 是一种口服有效的钙通道 (Calcium Channel) 阻滞剂和抗真菌剂,能拮抗去甲肾上腺素、血管紧张素和血清素引起的血管收缩,可抑制血小板功能并具有脑保护作用,同时对白色念珠菌生物膜和毒力具有抑制作用,可用于血管解痉、抗血栓和浅表性念珠菌感染研究。
产品编号: MS-Q42787 CAS No.: 54767-71-4 分子式: C20H36ClNOS 分子量: 374.02
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Suloctidil hydrochloride 是一种口服有效的钙通道 (Calcium Channel) 阻滞剂和抗真菌剂,能拮抗去甲肾上腺素、血管紧张素和血清素引起的血管收缩,可抑制血小板功能并具有脑保护作用,同时对白色念珠菌生物膜和毒力具有抑制作用,可用于血管解痉、抗血栓和浅表性念珠菌感染研究。

生物实验数据

生物活性 Suloctidil hydrochloride is an orally active calcium channel blocker and antifungal agent that antagonizes vasoconstriction induced by norepinephrine, angiotensin, and serotonin, inhibits platelet function, exerts cerebral protective effects, suppresses Candida albicans biofilm and virulence, and can be used for research on vascular antispasmodic, antithrombotic, and superficial candidiasis applications.
体外研究
(In Vitro)

Suloctidil (4 μg/mL; 48 h) hydrochloride 可抑制白假丝酵母菌菌株 YEM30 和 LC3 80% 的浮游生长,孵育 48 h 后的 MIC80 为 4 μg/mL。
Suloctidil (4-32 μg/mL; 3-24 h) hydrochloride 可抑制白色念珠菌菌株 YEM30 和 LC3 中 80% 的生物膜形成,24 h 后其 BIC80 为 16 μg/mL;同时该物质对生物膜形成的抑制作用具有浓度依赖性和时间依赖性,在 3 h 内 16 μg/mL 和 32 μg/mL 浓度下可实现完全抑制。
Suloctidil (32-256 μg/mL; 0.5-24 h) hydrochloride 可清除白色念珠菌菌株 YEM30 和 LC3 中 80% 的预成型生物膜,24 h 后的 BEC80 为 64 μg/mL;同时该药物具有快速、浓度依赖性的清除活性,在 64、128 和 256 μg/mL 浓度下,0.5 h 内即可达到杀真菌终点。
Suloctidil (64 μg/mL; 1-24 h) hydrochloride 可对预先形成的白色念珠菌 YEM30 生物膜产生时间依赖性形态损伤,1 h 时出现轻微皱缩,24 h 时出现严重皱缩和脱落。
Suloctidil (16 μg/mL; 12 h) hydrochloride 在培养起始阶段加入时,可完全抑制白色念珠菌 YEM30 的酵母相向菌丝相转换;在培养 2 h 后加入时可部分抑制该转换;而在培养 4 h 后加入时则无抑制作用,上述所有处理的总孵育时间均为 12 h。
Suloctidil (4 μg/mL; 18 h) hydrochloride 可将白念珠菌 YEM30 中菌丝特异性基因 HWP1、ALS3 和 ECE1 的表达分别下调 2.8 倍、2.3 倍和 4.9 倍,孵育 18 h 后。
Suloctidil (0.01-1 μM) hydrochloride 可非竞争性抑制去甲肾上腺素、血管紧张素和血清素诱导的离体动脉收缩,并竞争性抑制钙诱导的离体动脉收缩。

Real Time qPCR

Cell Line: Candida albicans strain YEM30
Concentration: 4 μg/mL
Incubation Time: 18 h
Result: Reduced the expression of hypha-specific genes HWP1 by 2.8-fold, ALS3 by 2.3-fold, and ECE1 by 4.9-fold compared to untreated controls.
体内研究
(In Vivo)

Suloctidil (256 μg/mL;阴道内给药;每日;持续至感染后第 21 天) hydrochloride 可显著降低外阴阴道念珠菌病小鼠模型中的白假丝酵母菌真菌载量,并减轻阴道组织炎症。

Animal Model: Kunming mice (female, 7-8 weeks old, 28-32 g, pseudoestrus via subcutaneous estradiol benzoate, intravaginally infected with Candida albicans)
Dosage: 256 μg/mL
Administration: intravaginal; daily; until day 21 post-infection
Result: Significantly reduced C.
albicans fungal burden compared to vehicle controls, with statistically significant differences starting at day 5 post-infection, and sustained through day 15 post-infection.
Showed no detectable inflammatory cell infiltration in vaginal tissues at day 5 post-infection, while vehicle-treated mice had large amounts of neutrophil and mononuclear cell infiltration.
Exhibited only mild histologic changes at day 9 post-infection, compared to significant lymphocyte and mononuclear cell infiltration in vehicle-treated mice.
Had less lymphocyte and cellular infiltration in the mucosa propria than vehicle-treated mice at day 15 post-infection.

化学信息

分子量 374.02
分子式 C20H36ClNOS
CAS No. 54767-71-4

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础