MA203 是一种高效且选择性的靶向 CHK1 的 PROTAC 降解剂,可加速实体瘤细胞和急性白血病细胞中 CHK1 的 CRBN 依赖性蛋白酶体降解,诱导 DNA 复制应激,阻断细胞周期进程并诱导肿瘤细胞凋亡 (apoptosis),同时不会损伤健康的已分化和原始造血细胞、基质细胞以及视网膜上皮细胞,可用于 CHK1 依赖性癌症的研究 (粉色: Chk1 配体 (MS-J28624);蓝色: Cereblon 配体 (MS-V29738);黑色: 连接子 (MS-T54836))。
MA203
产品编号: MS-Q37781 分子式: C38H45N9O8 分子量: 755.82
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
询价
5mg
询价
询价
10mg
询价
询价

产品描述

MA203 是一种高效且选择性的靶向 CHK1 的 PROTAC 降解剂,可加速实体瘤细胞和急性白血病细胞中 CHK1 的 CRBN 依赖性蛋白酶体降解,诱导 DNA 复制应激,阻断细胞周期进程并诱导肿瘤细胞凋亡 (apoptosis),同时不会损伤健康的已分化和原始造血细胞、基质细胞以及视网膜上皮细胞,可用于 CHK1 依赖性癌症的研究 (粉色: Chk1 配体 (MS-J28624);蓝色: Cereblon 配体 (MS-V29738);黑色: 连接子 (MS-T54836))。

生物实验数据

生物活性 MA203 is a highly potent and selective PROTAC degrader targeting CHK1 that accelerates CRBN-dependent proteasomal degradation of CHK1 in solid tumor cells and acute leukemia cells, induces DNA replication stress, blocks cell cycle progression and induces tumor cell apoptosis (apoptosis), while sparing healthy differentiated and primitive hematopoietic cells, stromal cells, and retinal epithelial cells, and can be used for research on CHK1-dependent cancers (pink: Chk1 ligand (MS-J28624); blue: Cereblon ligand (MS-V29738); black: linker (MS-T54836)).
IC50 & Target

Chk1

 

Bax

 

Bcl-xL

 

体外研究
(In Vitro)

MA203 (PROTAC 41) 在 5 µM 浓度下可使 MIA PaCa-2 胰腺导管腺癌 (PDAC) 细胞中 CHK1 水平降低约 50%,并且与 CHK1 具有很强的亲和力 (在 1.0 µM 浓度下结合率为 97%)。
MA203 (2 µM,24 小时) 可显著降低 Hydroxyurea (MS-A20221) (HU) 处理的 MIA PaCa-2 和 MOLT-4 细胞中 CHK1 水平,分别降低高达 80% 和 50%。
MA203 (2 μM,3-24 小时) 介导的 CHK1 降解是一个时间依赖性过程,并伴有 MIA PaCa-2 细胞中磷酸化状态的改变,表明该降解增强了 DNA 损伤信号。
MA203联合 HU 可显著降低 MOLT-4 细胞、MOLM-13 细胞、RS4-11 细胞和 HCT116 细胞中 CHK1 的表达水平至未处理细胞的 50%-40%,并减弱 MOLM-13 细胞中 CHK1 的表达。
在 MIA PaCa-2 细胞中,MA203 (1-5 µM,24 h) 与5 µM Irinotecan (MS-O02109) 联合使用时,其剂量依赖性地减弱CHK1表达的效果优于单独使用。
在MOLT-4细胞中,MA203 (0.5-10 µM,24 h) 与2 µM Cytarabine (MS-K89246) 联合使用时,其达到半数最大CHK1降解浓度 (DC50 = 387.4 nM) 显著低于单独使用时的DC50 (DC50 = 3.86 µM)。
MA203 (0.5–10 μM,24 小时) 增强 HU 诱导的 DNA 复制应激,导致 MIA PaCa-2 和 MOLT-4 细胞中 DNA 双链断裂和复制灾难。
MA203 (2 μM,24-48 小时) + HU 显著增加 MIA PaCa-2 和 MOLT-4 细胞中早期和晚期凋亡细胞的比例。
MA203 (2 μM,24 小时) 单独使用或与 HU 联合使用均能促进树突状细胞的存活。
MA203 (2 μM,24 小时) 显著增强 Ara-C 介导的细胞死亡,表现为 MOLT-4 细胞中杀死 50% 细胞所需的 Ara-C 浓度 (IC50) 降低了 62%。
MA203 (2 µM,24 小时) + HU 处理 24 小时后,MIA PaCa-2 细胞中多种关键蛋白的表达显著降低,这些蛋白调控肿瘤发生和 DNA 损伤修复,包括转录因子 7 (TCF7)、细胞周期相关蛋白 7 (CDCA7)、起始点识别复合物亚基 1 (ORC1) 和 Werner 综合征 RecQ 样解旋酶 (WRN),同时 RRM2 水平略有升高。
MA203 (2 µM,24-48 小时) + HU 处理可导致更显著的 G1/S 期阻滞;诱导更高的细胞凋亡率,并伴有 BAX/BIM 的上调和 BCL-XL/XIAP 的下调;线粒体膜电位更显著的丧失以及更强的 caspase 激活。

Western Blot Analysis

Cell Line: MIA PaCa-2 cells, MOLT-4 cells
Concentration: 2 µM
Incubation Time: 24 h
Result: Specifically degraded CHK1, and this degradation is enhanced by HU-induced CHK1 activation.
Did not affect other checkpoint kinases or common CRBN substrates.

Western Blot Analysis

Cell Line: MIA PaCa-2 cells
Concentration: 2 µM
Incubation Time: 3 h, 6 h, 10 h, 16 h, 24 h
Result: Illustrated that the degradation of CHK1 started already after 3 h in MIA PaCa-2 cells, to yield a 50%-70% reduction of CHK1 after 10-16 h.
Suppressed the HU-induced hyperphosphorylation of CHK1 at S296 but augmented its HU-induced hyperphosphorylation at S345.
Did not alter CHK2 levels over different time points.

Western Blot Analysis

Cell Line: MIA PaCa-2, MOLT-4
Concentration: 0.5 μM, 1 μM, 2 μM, 5 μM, 10μM
Incubation Time: 24 h
Result: Significantly increased γH2AX levels (4.2-fold).
Achieved a Dmax of 92% at a DC50 of 1.51 µM in MIA PaCa-2 cells, and a Dmax of 93.2% at a DC50 of 5.35 µM in MOLT-4 cells.
Significant 15.7-fold induction of ATM phosphorylation at S1981.

Apoptosis Analysis

Cell Line: MIA PaCa-2 cells, HCT116 cells, MOLT-4 cells, MOLM-13 cells
Concentration: 2 μM
Incubation Time: 24 h, 48 h
Result: After 48 h, the percentages of early and late apoptotic cells significantly increased to 15% and 14% in MIA PaCa-2 cell cultures; A significant rise in the early apoptotic cell population to 33% was observed.
In HCT116 cells, caused early and late apoptosis were significantly increased when combined with 0.5 mM HU for 48 h. An accumulation of late apoptotic cells (30%) occurred upon treatment.
Significantly augmented cell populations in early apoptosis to 19% and in late apoptosis to 15% after 24 h in MOLT-4 cells. In the presence of 1 mM HU, triggered early (48%) and late (24%) apoptotic cell death.
In MOLM-13 cells, triggered a significant accumulation of early apoptotic cells (33%), enhanced late apoptosis of MOLM-13 cells to 50%.
Normal human cells did not exhibit any significant impairment in viability upon treatment.
体内研究
(In Vivo)

MA203 (PROTAC 41) (12 μM,48 小时) 能显著抑制斑马鱼幼体中人类白血病细胞的增殖,且在有效剂量下对斑马鱼幼体无明显毒性。

化学信息

分子量 755.82
分子式 C38H45N9O8

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础