STAT3/NF-κB-IN-1

STAT3/NF-κB-IN-1 是一种强效的 STAT3 和 NF-κB 抑制剂,在 4T1 细胞中对 STAT3 和 NF-κB 的 IC50 值分别为 5.86 μM 和 4.22 μM,它通过上调关键凋亡调节因子 caspases-3/9 和 Bax 并下调 Bcl-2 的表达来诱导细胞凋亡,对乳腺癌细胞系具有显著的抗癌活性,能在体内减少肿瘤体积,可用于乳腺癌的研究。
STAT3/NF-κB-IN-1
产品编号: MS-Q35116 分子式: C27H26N8O3S 分子量: 542.61
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

STAT3/NF-κB-IN-1 是一种强效的 STAT3 和 NF-κB 抑制剂,在 4T1 细胞中对 STAT3 和 NF-κB 的 IC50 值分别为 5.86 μM 和 4.22 μM,它通过上调关键凋亡调节因子 caspases-3/9 和 Bax 并下调 Bcl-2 的表达来诱导细胞凋亡,对乳腺癌细胞系具有显著的抗癌活性,能在体内减少肿瘤体积,可用于乳腺癌的研究。

生物实验数据

生物活性 STAT3/NF-κB-IN-1 is a potent STAT3 and NF-κB inhibitor with IC50 values of 5.86 μM (STAT3) and 4.22 μM (NF-κB) in 4T1 cells, induces apoptosis by upregulating key apoptosis regulators (caspases-3/9, Bax) and downregulating Bcl-2 expression, exhibits significant anticancer activity against breast cancer cell lines, reduces tumor volume in vivo, and can be used for breast cancer research.
IC50 & Target

NF-κB

4.22 μM (IC50)

STAT3

5.86 μM (IC50)

Caspase-3

 

Caspase-9

 

Bcl-2

 

Bax

 

体外研究
(In Vitro)

STAT3/NF-κB-IN-1 (Compound 12a) (72 h) 对 4T1、MDA-MB-231、MDA-MB-468 和 MCF-7 细胞具有细胞毒性,其 IC50 值分别为 7.68、1.53、7.00 和 6.14 μM。
STAT3/NF-κB-IN-1 (10 μM, 24 h) 显著抑制 4T1 和 MDA-MB-231 细胞的迁移和侵袭。
STAT3/NF-κB-IN-1 (1-10 μM, 24-72 h) 显著诱导 MDA-MB-231 细胞早期凋亡,同时激活 caspase 3/9 和增加 Bax/Bcl-2。
STAT3/NF-κB-IN-1 (1-5 μM, 48-96 h) 显著抑制 p-STAT3 和 NF-κB 的表达。

Cell Migration Assay

Cell Line: 4T1 and MDA-MB-231 cells
Concentration: 10 μM
Incubation Time: 24 h
Result: Showed the percentage of scratch closure corresponding to cell migration of 15%.

Apoptosis Analysis

Cell Line: MDA-MB-231
Concentration: 1, 2.8, 6 and 10 μM
Incubation Time: 24, 48 and 72 h
Result: Considerably raised the percentage of apoptotic cells positive to annexin V FITC.
Increased early (ranging from 0.55 % to 22.51 %) and late apoptosis (ranging from 0.18 % to 16.07 %).
Had dose-dependent (1, 2.8 and 6 μM for 48 h) and time dependent (2.8 μM for 24, 48 and 72 h) effects on caspase-9 expression.

Western Blot Analysis

Cell Line: MDA-MB-231 cells
Concentration: 1, 1.5, 2 and 5 μM
Incubation Time: 48, 72 and 96 h
Result: Inhibited the phosphorylation of p-STAT3 Y705 protein as well as slightly downregulate the expression level of total STAT3.
Clearly suppressed NF-κB protein levels.
Had dose-dependent (1, 2 and 5 μM for 72 h) and time-dependent effects (2 μM for 48, 72 and 96 h) p-SAT3 and NF-κB expression.
体内研究
(In Vivo)

STAT3/NF-κB-IN-1 (Compound 12a) (40 mg/kg, s.c. 每天一次共 12 天) 在小鼠埃利希氏腹水癌模型中具有显著的抗肿瘤活性。

Animal Model: Ehrlich solid carcinoma model established in BALB/c mice
Dosage: 40 mg/kg
Administration: Subcutaneous injection (s.c.), once daily for 12 days
Result: Decreased the tumor volume by 70-80%, and there was no significant toxicity.

化学信息

分子量 542.61
分子式 C27H26N8O3S

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础