Elsulfavirine sodium

Synonyms: R-1206 sodium
Elsulfavirine sodium (R-1206) 是一种口服有效的人碳酸酐酶 (carbonic anhydrase, CA) 抑制剂和 HIV-1 非核苷类逆转录酶 (NNRT) 别构抑制剂,还通过靶向阻断腺苷酸琥珀酸裂解酶 (ADSL) 与胰岛素诱导基因蛋白 INSIG1/2 的相互作用来阻断 SREBP-1 介导的脂质从头合成并抑制肝癌细胞增殖,与 Lenvatinib (MS-K83330) 联用可产生协同抗肿瘤作用,在体内可转化为活性代谢物 VM1500A 以阻断逆转录酶的 DNA 聚合活性并抑制 HIV-1 复制,其对碳酸酐酶 I、VII、VI、VA、VB、IX、XIII、XIV 等亚型的 Ki=1960 nM-52400 nM,被用于 HIV-1 感染和肝癌的相关研究。
产品编号: MS-Q29095 CAS No.: 867365-40-0 分子式: C24H17BrCl2FN3NaO5S 分子量: 652.27
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Elsulfavirine sodium (R-1206) 是一种口服有效的人碳酸酐酶 (carbonic anhydrase, CA) 抑制剂和 HIV-1 非核苷类逆转录酶 (NNRT) 别构抑制剂,还通过靶向阻断腺苷酸琥珀酸裂解酶 (ADSL) 与胰岛素诱导基因蛋白 INSIG1/2 的相互作用来阻断 SREBP-1 介导的脂质从头合成并抑制肝癌细胞增殖,与 Lenvatinib (MS-K83330) 联用可产生协同抗肿瘤作用,在体内可转化为活性代谢物 VM1500A 以阻断逆转录酶的 DNA 聚合活性并抑制 HIV-1 复制,其对碳酸酐酶 I、VII、VI、VA、VB、IX、XIII、XIV 等亚型的 Ki=1960 nM-52400 nM,被用于 HIV-1 感染和肝癌的相关研究。

生物实验数据

生物活性 Elsulfavirine sodium (R-1206) is an orally active inhibitor of human carbonic anhydrase (CA) and an allosteric inhibitor of HIV-1 non-nucleoside reverse transcriptase (NNRT), and it also blocks SREBP-1-mediated de novo lipogenesis and inhibits hepatocellular carcinoma cell proliferation by targeting and disrupting the interaction between adenylosuccinate lyase (ADSL) and insulin-induced gene proteins INSIG1/2, produces synergistic antitumor effects when combined with Lenvatinib (MS-K83330), is converted in vivo to the active metabolite VM1500A to block the DNA polymerase activity of reverse transcriptase and inhibit HIV-1 replication, exhibits Ki=1960 nM-52400 nM against human carbonic anhydrase isoforms I, VII, VI, VA, VB, IX, XIII, and XIV, and is used in research related to HIV-1 infection and hepatocellular carcinoma.
IC50 & Target CA I (human):52400 nM (Ki)
体外研究
(In Vitro)

Elsulfavirine sodium (10 μM;1 h) 可显著阻断高糖诱导的 Huh7 细胞内 ADSL 与 INSIG1/2 的相互作用,抑制 SREBP-1 的剪切活化与核转位,并阻断 SRE 驱动的荧光素酶转录活性,抑制 SREBP 脂合成通路的激活。
Elsulfavirine sodium (10 μM;12 h) 可显著抑制高糖诱导的 Huh7 细胞中 SCAP 从内质网向高尔基体的转运,下调 SREBP-1 下游脂合成靶基因 FASN、ACACA、SCD、GPAM 的 mRNA 表达水平,同时减少细胞内脂滴的数量,抑制高糖诱导的细胞内脂质蓄积。
Elsulfavirine sodium (10 μM;8 h) 可显著抑制 Huh7 细胞中14C -葡萄糖向甘油三酯和脂肪酸的转化,阻断细胞内的新生脂质合成过程。
Elsulfavirine sodium 的活性代谢产物 VM-1500A (血清校正 EC50 约 13.8 nM) 可在体外细胞模型中有效抑制 HIV-1 临床分离株的复制。

Western Blot Analysis

Cell Line: Huh7 human hepatocellular carcinoma cells
Concentration: 10 μM (elsulfavirine), 20 μM (tezacaftor), 100 μM (pyrithioxin) as control compounds
Incubation Time: 1 h pre-treatment before high-glucose stimulation
Result: Markedly suppressed the cleavage and activation of SREBP-1 induced by high glucose in Huh7 cells, while it did not affect the phosphorylation of ADSL at S407 mediated by PKCε.
In contrast, the control compounds tezacaftor and pyrithioxin showed no significant inhibitory effect on SREBP-1 cleavage.

Real Time qPCR

Cell Line: Huh7 human hepatocellular carcinoma cells
Concentration: 10 μM
Incubation Time: 12 h co-treatment with high glucose
Result: Significantly downregulated the high glucose-induced mRNA expression of SREBP-1 downstream lipogenic target genes, including FASN, ACACA, SCD and GPAM, in Huh7 cells.
体内研究
(In Vivo)

Elsulfavirine (10 mg/kg;灌胃给药;每日 1 次;20 天) sodium 在裸鼠 Huh7 细胞皮下异种移植肝癌模型中,显著抑制肝癌肿瘤生长,降低肿瘤组织中增殖标志物 Ki-67 的表达、提升肿瘤细胞凋亡水平,同时下调 SREBP-1 及 FASN、ACLY 的蛋白表达。
Elsulfavirine (10 mg/kg;灌胃给药;每日 1 次;连续给药 20 天) sodium 联合 Lenvatinib (MS-K83330) (给药方式同 Elsulfavirine sodium) 在裸鼠 Huh7 细胞皮下异种移植肝癌模型中,协同抑制肝癌肿瘤生长,比单药处理的效果更好。

Animal Model: Male athymic BALB/c nude mice (6-week-old) with subcutaneous xenograft hepatocellular carcinoma (HCC) model established by subcutaneous inoculation of 1 × 106 Huh7 cells in the right flank10 mg/kg
Dosage: 10 mg/kg
Administration: Administered via gavage once daily for 20 consecutive days, starting on day 7 after tumor cell inoculation; with 10 mg/kg lenvatinib or not.
Result: As for monotherapy:
Significantly inhibited the growth of HCC xenografts in nude mice, reduced the expression of proliferation marker Ki-67 in tumor tissues, increased the level of tumor cell apoptosis, and downregulated the protein expression of SREBP-1 and lipogenesis-related enzymes including FASN and ACLY in tumor tissues, compared with the vehicle control group.
As for combination:
Exerted a synergistic inhibitory effect on HCC tumor growth, with a more significant reduction in tumor volume and weight, lower Ki-67 expression, higher tumor cell apoptosis, and more pronounced downregulation of SREBP-1, FASN and ACLY in tumor tissues, compared with the Elsulfavirine or lenvatinib monotherapy groups.

化学信息

分子量 652.27
分子式 C24H17BrCl2FN3NaO5S
CAS No. 867365-40-0
别名 R-1206 sodium

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础