PZ671 是一种强效的靶向 Bcl-xL 的 PROTAC 降解剂,在 MOLT-4 细胞中 IC50 为 1.3 nM、对 Bcl-xL 的 DC50 为 0.9 nM,可诱导 MOLT-4 细胞凋亡,有效抑制 MOLT-4 异种移植小鼠中的肿瘤生长并迅速恢复短暂性降低的血小板数目,可用于小细胞肺癌等癌症研究(粉色:Bcl-xL 配体 (MS-H84815);蓝色:Cereblon 配体 (MS-B84852);黑色:连接子)。
PZ671
产品编号: MS-Q19540 纯度: 98.70% 分子式: C66H79ClF3N7O11S3 分子量: 1335.02
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
询价
25mg
询价
询价
50mg
询价
询价
100mg
询价
询价
200mg
询价
询价

产品描述

PZ671 是一种强效的靶向 Bcl-xL 的 PROTAC 降解剂,在 MOLT-4 细胞中 IC50 为 1.3 nM、对 Bcl-xL 的 DC50 为 0.9 nM,可诱导 MOLT-4 细胞凋亡,有效抑制 MOLT-4 异种移植小鼠中的肿瘤生长并迅速恢复短暂性降低的血小板数目,可用于小细胞肺癌等癌症研究(粉色:Bcl-xL 配体 (MS-H84815);蓝色:Cereblon 配体 (MS-B84852);黑色:连接子)。

生物实验数据

生物活性 PZ671 is a potent PROTAC targeting Bcl-xL for degradation, with an IC50 of 1.3 nM in MOLT-4 cells and a DC50 of 0.9 nM for Bcl-xL; it induces apoptosis in MOLT-4 cells, effectively inhibits tumor growth in MOLT-4 xenograft mice and rapidly restores the transient decrease in platelet count, and can be used for cancer research such as small cell lung cancer (pink: Bcl-xL ligand (MS-H84815); blue: Cereblon ligand (MS-B84852); black: linker).
IC50 & Target

Bcl-xL

 

Cereblon

 

体外研究
(In Vitro)

PZ671 (Compound 5b) (0.4-100 nM, 1-16 h) 可诱导 MOLT-4 细胞中 Bcl-xL 降解。

PZ671 (10, 100 nM) 在 MOLT-4 细胞中通过蛋白酶体依赖途径降解 Bcl-xL。

PZ671 (0.4-100 nM, 48 h) 可诱导 MOLT-4 细胞凋亡。

PZ671 (30-1000 nM, 48 h) 在浓度高于 1 μM 时会引起人血小板中 Bcl-xL 降解。

Western Blot Analysis

Cell Line: MOLT-4 cells
Concentration: 0.4, 1, 3, 11, 33. and 100 nM
Incubation Time: 16 h, and 100 nM for 1, 2, 3, 4, 5, 6 h
Result: Induced dose-dependent Bcl-xL degradation in MOLT-4 cells.
Significantly reduced Bcl-xL levels within 2 h, and almost complete degradation of Bcl-xL after 4 h at 100 nM.

Western Blot Analysis

Cell Line: MOLT-4 cells
Concentration: 10 and 100 nM, pretreatingt with 1 μM MG-132 (MS-L06849) for 2 h
Incubation Time: /
Result: Degradation was blocked by proteasome inhibitor MG-132 (MS-L06849).

Western Blot Analysis

Cell Line: MOLT-4 cells
Concentration: 0.4, 1, 3, 11, 33. and 100 nM
Incubation Time: 16 h
Result: Dose-dependently increased poly (ADP-ribose) polymerase (PARP) and caspase-3 cleavage.
Significantly reduced β-actin levels with increasing concentrations.

Western Blot Analysis

Cell Line: Human platelets
Concentration: 30, 100, 300 and 1000 nM
Incubation Time: 48 h
Result: Degraded Bcl-xL at concentrations above 1 μM.
体内研究
(In Vivo)

PZ671 (1.5 mg/kg;腹腔注射;每 4 天一次,持续 22 天) 在 MOLT-4 异种移植小鼠中显著抑制了肿瘤生长,但给药后引起血小板计数短暂下降,从第二天起能迅速恢复。

Animal Model: MOLT-4 xenograft mice (CB-17 SCID, Female, 5-6 weeks)
Dosage: 1.5 mg/kg
Administration: Intraperitoneal injection, every 4 days for 22 days
Result: Markedly suppressed the tumor growth.
Caused a transient ∼72% reduction in platelet counts after a single dose, with rapid recovery from the second day onward.
性状 固体
颜色 Off-white to light yellow

化学信息

分子量 1335.02
分子式 C66H79ClF3N7O11S3

储存&溶解度

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 100 mg/mL (74.91 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM0.7491 mL3.7453 mL7.4905 mL18.7263 mL
5 mM0.1498 mL0.7491 mL1.4981 mL3.7453 mL
10 mM0.0749 mL0.3745 mL0.7491 mL1.8726 mL
15 mM0.0499 mL0.2497 mL0.4994 mL1.2484 mL
20 mM0.0375 mL0.1873 mL0.3745 mL0.9363 mL
25 mM0.0300 mL0.1498 mL0.2996 mL0.7491 mL
30 mM0.0250 mL0.1248 mL0.2497 mL0.6242 mL
40 mM0.0187 mL0.0936 mL0.1873 mL0.4682 mL
50 mM0.0150 mL0.0749 mL0.1498 mL0.3745 mL
60 mM0.0125 mL0.0624 mL0.1248 mL0.3121 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础