Protein kinase inhibitor H-7

GMP
Protein kinase inhibitor H-7 是一种选择性的 PKC 和环核苷酸依赖性蛋白激酶抑制剂,对兔蛋白激酶 C 的 Ki 值为 6.0 μM,对兔 cAMP 依赖性蛋白激酶的 Ki 值为 3.0 μM,对猪 cGMP 依赖性蛋白激酶的 Ki 值为 5.8 μM,不影响 Ca2+-钙调蛋白依赖性酶,可调控 Actin 细胞骨架、抑制收缩性、破坏应力纤维、诱导突出活性、稳定细胞间连接并引发快速可逆的细胞骨架重组,可用作阐明蛋白激酶 C 介导的信号系统作用的研究工具。
产品编号: MS-Q12346 纯度: 99.96% CAS No.: 84477-87-2 分子式: C14H17N3O2S 分子量: 291.38
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
3-5 天
100mg
询价
3-5 天
200mg
询价
询价
500mg
询价
询价

产品描述

Protein kinase inhibitor H-7 是一种选择性的 PKC 和环核苷酸依赖性蛋白激酶抑制剂,对兔蛋白激酶 C 的 Ki 值为 6.0 μM,对兔 cAMP 依赖性蛋白激酶的 Ki 值为 3.0 μM,对猪 cGMP 依赖性蛋白激酶的 Ki 值为 5.8 μM,不影响 Ca2+-钙调蛋白依赖性酶,可调控 Actin 细胞骨架、抑制收缩性、破坏应力纤维、诱导突出活性、稳定细胞间连接并引发快速可逆的细胞骨架重组,可用作阐明蛋白激酶 C 介导的信号系统作用的研究工具。

生物实验数据

生物活性 Protein kinase inhibitor H-7 is a selective inhibitor of PKC and cyclic nucleotide-dependent protein kinases, with a Ki of 6.0 μM for rabbit protein kinase C, 3.0 μM for rabbit cAMP-dependent protein kinase, and 5.8 μM for porcine cGMP-dependent protein kinase; it does not affect Ca2+-calmodulin-dependent enzymes, and it can modulate the Actin cytoskeleton, inhibit contractility, disrupt stress fibers, induce protrusive activity, stabilize cell-cell junctions, and trigger rapid and reversible cytoskeletal reorganization, making it a useful research tool for elucidating the role of protein kinase C-mediated signaling systems.
IC50 & Target PKC:6 μM (Ki)
体外研究
(In Vitro)

Protein kinase inhibitor H-7 可强效且直接地抑制兔脑蛋白激酶 C (Ki = 6.0 μM) 和兔骨骼肌 cAMP 依赖性蛋白激酶 (Ki = 3.0 μM),而对来自多个物种和组织的其他纯化蛋白激酶及 ATP 酶的活性较弱。
Protein kinase inhibitor H-7 (10-50 μM; 2 min preincubation) 可剂量依赖性地抑制完整洗涤兔血小板中蛋白激酶 C 介导的 40K 蛋白磷酸化,但即使在 50 μM 浓度下,也不会抑制同一细胞系统中 Ca2+-钙调蛋白介导的 20K 蛋白磷酸化。
Protein kinase inhibitor H-7 (100-300 μM) 可增强 Swiss 3T3 成纤维细胞和 SVT2 转化成纤维细胞的板状伪足突出活性并降低细胞极性,表现为分散值显著升高、伸长值显著降低。
Protein kinase inhibitor H-7 (300 μM; 10-30 min) 可破坏鸡晶状体细胞中的应力纤维及黏着斑相关蛋白 (肌球蛋白、纽蛋白、踝蛋白),同时保留细胞间黏着连接,且这些细胞骨架变化在去除 H-7 后可完全逆转。
Protein kinase inhibitor H-7 (300 μM; 10-15 min pretreatment, or added during permeabilization/contraction) 在用作预处理时,可强烈抑制 Saponin (MS-P84628) 透化的瑞士 3T3 成纤维细胞、鸡晶状体细胞和鸡胚胎成纤维细胞中由 ATP 诱导的收缩,但在加入透化细胞时仅能微弱抑制收缩。

Immunofluorescence

Cell Line: chick lens cells, Swiss 3T3 fibroblasts, chicken embryo fibroblasts
Concentration: 300 μM
Incubation Time: 10 min, 30 min; 30 min incubation followed by 3-60 min recovery
Result: Caused rapid deterioration of actin-containing stress fibers and associated myosin, vinculin, and talin in focal contact sites within 10-30 min.
Reorganized actin into short cytoplasmic bundles and lamellipodial protrusions.
Retained actin, vinculin, and N-cadherin associated with cell-cell adherens junctions, with only minor increases in diffuse cytoplasmic N-cadherin staining.
Reversed these effects upon removal: stress fibers reassembled within 3-10 min, with actin labeling augmented near adhesion sites, and the subcellular distribution of actin, myosin, vinculin, talin, and N-cadherin was restored within 60 min.
性状 固体
颜色 White to light yellow

化学信息

分子量 291.38
分子式 C14H17N3O2S
CAS No. 84477-87-2

储存&溶解度

储存方式

4°C, protect from light

*In solvent: -80°C, 6 months; -20°C, 1 month (protect from light)

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 100 mg/mL (343.19 mM; 超声助溶 (<60°C); 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM3.4319 mL17.1597 mL34.3194 mL85.7986 mL
5 mM0.6864 mL3.4319 mL6.8639 mL17.1597 mL
10 mM0.3432 mL1.7160 mL3.4319 mL8.5799 mL
15 mM0.2288 mL1.1440 mL2.2880 mL5.7199 mL
20 mM0.1716 mL0.8580 mL1.7160 mL4.2899 mL
25 mM0.1373 mL0.6864 mL1.3728 mL3.4319 mL
30 mM0.1144 mL0.5720 mL1.1440 mL2.8600 mL
40 mM0.0858 mL0.4290 mL0.8580 mL2.1450 mL
50 mM0.0686 mL0.3432 mL0.6864 mL1.7160 mL
60 mM0.0572 mL0.2860 mL0.5720 mL1.4300 mL
80 mM0.0429 mL0.2145 mL0.4290 mL1.0725 mL
100 mM0.0343 mL0.1716 mL0.3432 mL0.8580 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (protect from light)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础