AZ10397767 是一种具有口服活性的选择性 CXCR2 受体拮抗剂(IC50 为 1 nM),可减弱 Oxaliplatin (MS-L84463) 诱导的 NF-κB 转录活性并增强 Oxaliplatin 诱导的雄激素非依赖性前列腺癌 (AIPC) 细胞凋亡,同时显著抑制中性粒细胞募集到肿瘤中,从而在体外和体内对肿瘤生长产生不利影响。
产品编号: MS-Q08510 CAS No.: 333742-63-5 分子式: C15H14ClFN4O2S2 分子量: 400.88
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
5mg
询价
询价
10mg
询价
询价
50mg
询价
询价
100mg
询价
询价

产品描述

AZ10397767 是一种具有口服活性的选择性 CXCR2 受体拮抗剂(IC50 为 1 nM),可减弱 Oxaliplatin (MS-L84463) 诱导的 NF-κB 转录活性并增强 Oxaliplatin 诱导的雄激素非依赖性前列腺癌 (AIPC) 细胞凋亡,同时显著抑制中性粒细胞募集到肿瘤中,从而在体外和体内对肿瘤生长产生不利影响。

生物实验数据

生物活性 AZ10397767 is an orally active and selective CXCR2 receptor antagonist with an IC50 of 1 nM that attenuates Oxaliplatin (MS-L84463)-induced NF-κB transcriptional activity and enhances Oxaliplatin-induced apoptosis in androgen-independent prostate cancer (AIPC) cells, while significantly inhibiting neutrophil recruitment to tumors, thereby adversely affecting tumor growth in vitro and in vivo.
IC50 & Target CXCR2:1 nM
体外研究
(In Vitro)

AZ10397767 (20 nM; 48小时) 消除 IL-8 (3 nM) 诱导的细胞增殖,将细胞数量减少至基础水平以下。
AZ10397767 (20 nM; 72小时) 增加 Oxaliplatin (MS-L84463) 的细胞毒性,并增强 Oxaliplatin 诱导的 AIPC 细胞凋亡。AZ10397767 本身不能诱导 PC3 或 DU145 细胞凋亡。
AZ10397767 (20 nM; 24小时) 减弱 Oxaliplatin 诱导的 NF-κB 转录活性,减弱 PC3 和 DU145 细胞中每种 CXC 趋化因子 (CXCL8 和 CXCL1) 和抗凋亡基因 (Bcl-2 和生存素) 的 mRNA 转录水平的增加。

Cell Proliferation Assay

Cell Line: LNCaP cells and 22Rv1 cells
Concentration: 20 nM
Incubation Time: 48 h
Result: Abrogated the IL-8-induced (3 nM) increase in proliferation, reducing cell number to below basal levels.

Apoptosis Analysis

Cell Line: PC3 or DU145 cells
Concentration: 20 nM
Incubation Time: 72 h
Result: Coadministration with 0.1 or 1 μM Oxaliplatin resulted in a marked increase in the sub-G0/G1 cell population in either cell line.
Potentiates Oxaliplatin-induced apoptosis in AIPC cells.

RT-PCR

Cell Line: PC3 or DU145 cells
Concentration: 20 nM
Incubation Time: 24 h
Result: Attenuated the Oxaliplatin (1 μM)-induced NF-κB transcriptional activity and the increases in mRNA transcript levels for each of the CXC-chemokines (CXCL8 and CXCL1) and antiapoptotic genes (Bcl-2 and survivin) in the PC3 and DU145 cells.
体内研究
(In Vivo)

AZ10397767 (100 mg/kg; 口服灌胃; 每天两次; 持续 22 天) 在 A549 异种移植肿瘤中表现出中性粒细胞浸润减少并伴有肿瘤生长迟缓。
AZ10397767 (化合物 30a) 在大鼠中的 CL 为 4 ml/min/kg。

Animal Model: SCID mice with A549 cells
Dosage: 100 mg/kg
Administration: Orally; twice daily; for 22 days
Result: Tumors were 36% smaller than their control counterparts.
Significantly (p < 0.01) reduced the number of tumor-infiltrating neutrophils compared to mice receiving vehicle control.

化学信息

分子量 400.88
分子式 C15H14ClFN4O2S2
CAS No. 333742-63-5

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础