RIPK3-IN-3 是一种高选择性 RIPK3 抑制剂,对 RIPK3 和 PIRK1 的 IC50 值分别为 14 nM 和 8.21 μM,可通过阻断 RIPK3 介导的 MLKL 磷酸化抑制坏死性凋亡 (necroptosis),并通过下调 CXCL5 分泌抑制细胞迁移和侵袭,还可缓解 TNFα 诱导的全身性炎症反应综合征,因此可用于全身性炎症反应综合征及胰腺癌的相关研究。
产品编号: MS-Q02595 纯度: 95.98% CAS No.: 3052303-53-1 分子式: C16H11N5S 分子量: 305.36
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
询价
100mg
询价
询价
200mg
询价
询价
500mg
询价
询价

产品描述

RIPK3-IN-3 是一种高选择性 RIPK3 抑制剂,对 RIPK3 和 PIRK1 的 IC50 值分别为 14 nM 和 8.21 μM,可通过阻断 RIPK3 介导的 MLKL 磷酸化抑制坏死性凋亡 (necroptosis),并通过下调 CXCL5 分泌抑制细胞迁移和侵袭,还可缓解 TNFα 诱导的全身性炎症反应综合征,因此可用于全身性炎症反应综合征及胰腺癌的相关研究。

生物实验数据

生物活性 RIPK3-IN-3 is a highly selective RIPK3 inhibitor with IC50 values of 14 nM for RIPK3 and 8.21 μM for PIRK1 that inhibits necroptosis by blocking RIPK3-mediated MLKL phosphorylation, suppresses cell migration and invasion by downregulating CXCL5 secretion, and alleviates TNFα-induced systemic inflammatory response syndrome, making it suitable for research on systemic inflammatory response syndrome and pancreatic cancer.
IC50 & Target

RIPK3

14 nM (IC50)

RIPK1

8.21 μM (IC50)

IL-6

 

体外研究
(In Vitro)

RIPK3-IN-3 (Compound 20) (10-50 μM; 14 h) 可抑制 HT-29 细胞中坏死性凋亡三联处理 (TNF-α, Cycloheximide (MS-C76056) 和 Z-VAD-FMK (MS-L66221); TCZ) 诱导的磷酸化 MLKL 和磷酸化 RIPK3 水平。
RIPK3-IN-3 (20-50 μM; 8-14 h) 可剂量依赖性地抑制 TCZ 诱导的 HT-29 和 U937 细胞坏死性凋亡,降低 PI 阳性细胞比例并提高细胞存活率。
RIPK3-IN-3 (25-50 μM; 14 h) 可剂量依赖性地抑制 HT-29 细胞中 TCZ 诱导的 MLKL 寡聚化,其中 50 μM 浓度可将寡聚体水平降至基线值的约 3 倍。
RIPK3-IN-3 (14 h) 在 HT-29 细胞中呈剂量依赖性抑制 TCZ 诱导的活性氧生成。
RIPK3-IN-3 (25-50 μM; 12 h) 可剂量依赖性地抑制 AsPC-1 细胞中 TCZ 诱导的 CXCL5 分泌,在 25 μM 浓度下可将其水平从约 130 pg/mL 降至约 70 pg/mL,在 50 μM 浓度下降至约 60 pg/mL。
RIPK3-IN-3 (25-50 μM; 24 h) 可剂量依赖性地抑制 TCZ 条件培养基诱导的 AsPC-1 细胞迁移。
RIPK3-IN-3 (25-50 μM; 12 h) 可剂量依赖性地抑制由 TCZ 条件培养基诱导的 AsPC-1 细胞侵袭。

Western Blot Analysis

Cell Line: HT-29 colon cancer cells
Concentration: 10, 25 and 50 μM
Incubation Time: 2 h pretreatment; 12 h TCZ treatment
Result: Inhibited phospho-MLKL levels by 86.31% at 50 μM.
Reduced phospho-RIPK3 and phospho-MLKL levels in a concentration-dependent manner.
Had no significant effect on phospho-RIPK1 levels.

Western Blot Analysis

Cell Line: HT-29 colon cancer cells
Concentration: 25 and 50 μM
Incubation Time: 2 h pretreatment; 12 h TCZ treatment
Result: Reduced TCZ-induced MLKL oligomer levels to ~7-fold above baseline at 25 μM.
Reduced TCZ-induced MLKL oligomer levels to ~3-fold above baseline at 50 μM.
Showed a dose-dependent inhibitory effect on MLKL oligomerization.

ELISA Assay

Cell Line: AsPC-1 pancreatic cancer cells
Concentration: 25 and 50 μM
Incubation Time: 15 min pretreatment; 4 h TCZ treatment; 8 h fresh media incubation
Result: Reduced TCZ-induced CXCL5 secretion from ~130 pg/mL to ~70 pg/mL at 25 μM.
Reduced TCZ-induced CXCL5 secretion from ~130 pg/mL to ~60 pg/mL at 50 μM.

Cell Migration Assay

Cell Line: AsPC-1 pancreatic cancer cells
Concentration: 25 and 50 μM
Incubation Time: 24 h
Result: Reduced TCZ-conditioned media-induced cell migration from ~100% to ~50% at 25 μM.
Reduced TCZ-conditioned media-induced cell migration from ~100% to ~35% at 50 μM.

Cell Invasion Assay

Cell Line: AsPC-1 pancreatic cancer cells
Concentration: 25 and 50 μM
Incubation Time: 12 h
Result: Reduced TCZ-conditioned media-induced cell invasion from ~100% to ~55% at 25 μM.
Reduced TCZ-conditioned media-induced cell invasion from ~100% to ~25% at 50 μM.
体内研究
(In Vivo)

RIPK3-IN-3 (Compound 20) (10-25 mg/kg;腹腔注射;单次给药) 可在 25 mg/kg 腹腔注射剂量下完全保护小鼠免受致死性 TNF-α 诱导的全身性炎症反应综合征,减少体温降低,并以剂量依赖的方式降低血清 IL-6 水平。

Animal Model: C57BL/6 (6-week-old female)
Dosage: 10 mg/kg; 25 mg/kg
Administration: i.p.; single dose
Result: Provided survival comparable to reference compound GSK872 at 10 mg/kg.
Fully protected mice from lethal TNF-α-induced shock at 25 mg/kg.
Reduced TNF-α-induced body temperature loss in a dose-dependent manner.
Decreased serum IL-6 levels relative to vehicle controls.
性状 固体
颜色 Light yellow to yellow

化学信息

分子量 305.36
分子式 C16H11N5S
CAS No. 3052303-53-1

储存&溶解度

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 100 mg/mL (327.48 mM; 超声助溶 (<60°C); 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM3.2748 mL16.3741 mL32.7482 mL81.8706 mL
5 mM0.6550 mL3.2748 mL6.5496 mL16.3741 mL
10 mM0.3275 mL1.6374 mL3.2748 mL8.1871 mL
15 mM0.2183 mL1.0916 mL2.1832 mL5.4580 mL
20 mM0.1637 mL0.8187 mL1.6374 mL4.0935 mL
25 mM0.1310 mL0.6550 mL1.3099 mL3.2748 mL
30 mM0.1092 mL0.5458 mL1.0916 mL2.7290 mL
40 mM0.0819 mL0.4094 mL0.8187 mL2.0468 mL
50 mM0.0655 mL0.3275 mL0.6550 mL1.6374 mL
60 mM0.0546 mL0.2729 mL0.5458 mL1.3645 mL
80 mM0.0409 mL0.2047 mL0.4094 mL1.0234 mL
100 mM0.0327 mL0.1637 mL0.3275 mL0.8187 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础