Enavatuzumab

Synonyms: 依那妥组单抗; PDL192; ABT-361; Anti-TNFRSF12A/TWEAKR/CD266 Reference Antibody (enavatuzumab)
Enavatuzumab (PDL192; ABT-361) 是一种靶向 TNF 样细胞凋亡弱诱导剂受体 (TWEAK) 的人源化 IgG1 单克隆抗体,其通过直接的 TweakR 信号和抗体依赖性细胞介导的细胞毒性 (ADCC) 诱导肿瘤生长抑制,并能主动募集和激活骨髓效应细胞来杀死肿瘤细胞,从而在体外和体内抑制各种人类 TweakR 阳性癌细胞系和异种移植物的生长,而 TWEAK (Fn14; TNFRSF12A) 作为 TWEAK 受体 (TweakR) 的天然配体可刺激多种细胞反应。
产品编号: MS-P69268 纯度: 98.27% CAS No.: 1062149-33-0
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
3-5 天
5mg
询价
询价
10mg
询价
询价
50mg
询价
询价

产品描述

Enavatuzumab (PDL192; ABT-361) 是一种靶向 TNF 样细胞凋亡弱诱导剂受体 (TWEAK) 的人源化 IgG1 单克隆抗体,其通过直接的 TweakR 信号和抗体依赖性细胞介导的细胞毒性 (ADCC) 诱导肿瘤生长抑制,并能主动募集和激活骨髓效应细胞来杀死肿瘤细胞,从而在体外和体内抑制各种人类 TweakR 阳性癌细胞系和异种移植物的生长,而 TWEAK (Fn14; TNFRSF12A) 作为 TWEAK 受体 (TweakR) 的天然配体可刺激多种细胞反应。

生物实验数据

生物活性 Enavatuzumab (PDL192; ABT-361) is a humanized IgG1 monoclonal antibody targeting the TNF-like weak inducer of apoptosis receptor (TWEAK) that induces tumor growth inhibition through direct TweakR signaling and antibody-dependent cell-mediated cytotoxicity (ADCC) and actively recruits and activates myeloid effector cells to kill tumor cells, thereby inhibiting the growth of various human TweakR-positive cancer cell lines and xenografts in vitro and in vivo, while TWEAK (Fn14; TNFRSF12A), the natural ligand of the TWEAK receptor (TweakR), can stimulate diverse cellular responses.
IC50 & Target

TWEAK

 

体外研究
(In Vitro)

Enavatuzumab (0.1-1000 ng/mL; 4 小时) 在体外诱导效应细胞活化和肿瘤细胞杀伤。
Enavatuzumab (10μg/mL; 24 小时) 导致免疫效应细胞向 SN12C 和 A375 肿瘤细胞的迁移显着增加。

Cell Viability Assay

Cell Line: Renal carcinoma cell line SN12C, the melanoma cell line A375, the colorectal cancer cell lines HCT116 and DLD-1
Concentration: 0.1, 1, 10, 100, 1000 ng/mL
Incubation Time: 4 hours
Result: Showed potent tumor cell killing on all TweakR-positive tumor cells tested.
体内研究
(In Vivo)

Enavatuzumab (10mg/kg; 腹腔注射; 每周 3 次; 6, 7 或者 9 剂) 对不同的异种移植肿瘤表现出不同的抗肿瘤活性。

Animal Model: 6-week old SCID mice with SN12C or HCT116 or DLD-1 or A375 tumors
Dosage: 10 mg/kg
Administration: IP; three times per week; 6 doses (DLD-1 model), 7 doses (SN12C model), 9 doses (A375 or HCT116 model)
Result: Some TweakR-expressing cells, such as SN12C and A375, were sensitive in vivo and in vitro.
Some TweakR-expressing cell lines, such as HCT116 and DLD-1, were not sensitive to enavatuzumab treatment in vivo, though both cell lines were effectively killed via ADCC in vitro.
Up-regulated the activation markers on splenocytes in SN12C tumor-bearing mice.
Clinical Trial
NCT NumberSponsorConditionStart DatePhase
NCT00738764Abbott
Cancer
2008-07PHASE1
性状 液体
颜色 Colorless to light yellow

化学信息

CAS No. 1062149-33-0
别名 依那妥组单抗; PDL192; ABT-361; Anti-TNFRSF12A/TWEAKR/CD266 Reference Antibody (enavatuzumab)

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Shipping with dry ice.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础