JAK3-IN-20 是一种具有口服活性的选择性 JAK3 抑制剂(IC50 为 0.7473 nM),它可与 JAK3 Cys909 形成共价键,竞争性占据 ATP 的催化位点结合区域并阻断 JAK-STAT 通路的激活,从而抑制对 Bortezomib (MS-D47138) 耐药的癌细胞的迁移、增殖与肿瘤生长,诱导剂量依赖性的细胞凋亡 (apoptosis),可用于硼替佐米耐药性多发性骨髓瘤的相关研究。
产品编号: MS-P29276 CAS No.: 3104109-31-8 分子式: C24H31ClN8O2 分子量: 499.01
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

JAK3-IN-20 是一种具有口服活性的选择性 JAK3 抑制剂(IC50 为 0.7473 nM),它可与 JAK3 Cys909 形成共价键,竞争性占据 ATP 的催化位点结合区域并阻断 JAK-STAT 通路的激活,从而抑制对 Bortezomib (MS-D47138) 耐药的癌细胞的迁移、增殖与肿瘤生长,诱导剂量依赖性的细胞凋亡 (apoptosis),可用于硼替佐米耐药性多发性骨髓瘤的相关研究。

生物实验数据

生物活性 JAK3-IN-20 is an orally active selective JAK3 inhibitor with an IC50 of 0.7473 nM that forms a covalent bond with JAK3 Cys909, competitively occupies the ATP catalytic site binding region, and blocks activation of the JAK-STAT pathway, thereby inhibiting the migration, proliferation, and tumor growth of cancer cells resistant to Bortezomib (MS-D47138), inducing dose-dependent apoptosis, and serving as a potential agent for research on bortezomib-resistant multiple myeloma.
IC50 & Target JAK3:0.7473 nM
体外研究
(In Vitro)

JAK3-IN-20 (Compound 7n) (60 min) 可强效抑制纯化的 JAK3 蛋白,其 IC50 为 0.7473 nM。
JAK3-IN-20 (5 nM) 对 JAK3 具有高选择性,在 5 nM 时抑制率达 96.87%,对 JAK2 和 TYK2 仅表现出中等抑制作用,对 JAK1 无显著活性。
JAK3-IN-20 (72 h) 可强效抑制 Bortezomib (MS-D47138) 耐药型 KM3 多发性骨髓瘤细胞的增殖,其 IC50 为 0.245 μM;同时也能抑制 KM3、BaF3-JAK3、Raji、Paca-02、H1975、HK-2 和 LX-2 细胞的增殖,且 IC50 值在 0.211-4.317 μM 之间。
JAK3-IN-20 (0.3125-5.0 μM; 48 h) 可在 Bortezomib 耐药的 KM3 多发性骨髓瘤细胞中诱导剂量依赖性凋亡并诱导 G2/M 期细胞阻滞。
JAK3-IN-20 (78.13-312.5 nM; 48 h) 可浓度依赖性地抑制 Bortezomib 耐药的 KM3 多发性骨髓瘤细胞的迁移。
JAK3-IN-20 (0.3125-5.0 μM; 48 h) 可在 Bortezomib 耐药的 KM3 多发性骨髓瘤细胞中以剂量依赖方式上调促凋亡蛋白 Bax,并下调抗凋亡蛋白 Bcl-2。
JAK3-IN-20 (15.6 nM-4 μM; 1-72 h) 可剂量依赖性地抑制 Bortezomib 耐药的 KM3 多发性骨髓瘤细胞中 STAT5 的磷酸化。

Apoptosis Analysis

Cell Line: Bortezomib-resistant KM3 multiple myeloma cells
Concentration: 0.3125, 1.25, 5.0 μM
Incubation Time: 48 h
Result: At 0.3125 μM, a small proportion of apoptotic cells (orange-stained nuclei) were observed.
At 1.25 μM, the proportion of apoptotic cells increased
At 5.0 μM, numerous advanced apoptotic cells with cracked nuclei were observed.
Confirmed chromatin condensation and nuclear disintegration across all tested concentrations via DAPI staining.

Western Blot Analysis

Cell Line: Bortezomib-resistant KM3 multiple myeloma cells
Concentration: 15.6, 62.5, 250 nM, 1, 4 μM (24 h); 250 nM (1, 12, 24, 48, 72 h)
Incubation Time: 1, 12, 24, 48, 72 h
Result: At 250 nM, p-STAT5 expression decreased; inhibition increased in a dose-dependent manner, with further decreased p-STAT5 expression at 4 μM.
Showed maximal inhibition of p-STAT5 at 12 h, with gradual recovery of phosphorylation by 24 h in time-course analysis.
体内研究
(In Vivo)

JAK3-IN-20 (Compound 7n) (60 mg/kg;灌胃;每日一次;连续 21 天) 在 Bortezomib (MS-D47138) 耐药的多发性骨髓瘤异种移植模型中展现出肿瘤生长抑制效果,且未出现显著的体重下降。

Animal Model: NYG nude mice with KM3 cells (Bortezomib-
resistant) xenograft (~6 weeks old, ~20 g)
Dosage: 60 mg/kg
Administration: p.o.; daily; 21 days
Result: Reduced tumor volume significantly lower than normal saline control and 60 mg/kg Tofacitinib (MS-D04245) group on study day 21.
Caused no significant loss of body weight.

化学信息

分子量 499.01
分子式 C24H31ClN8O2
CAS No. 3104109-31-8

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础