BM 957 是 Bcl-2 和 Bcl-xL 的有效抑制剂,对二者的 Ki 值分别为 1.2 和 <1 nM,IC50 值分别为 5.4 和 6.0 nM。
产品编号: MS-P23587 CAS No.: 1391107-54-2 分子式: C52H56ClF3N6O7S3 分子量: 1065.68
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

BM 957 是 Bcl-2 和 Bcl-xL 的有效抑制剂,对二者的 Ki 值分别为 1.2 和 <1 nM,IC50 值分别为 5.4 和 6.0 nM。

生物实验数据

生物活性 BM 957 is a potent inhibitor of Bcl-2 and Bcl-xL with Ki values of 1.2 and <1 nM, and IC50 values of 5.4 and 6.0 nM, respectively.
IC50 & Target Bcl-2:1.2 nM (ki), BCL-XL:1 nM (ki), Bcl-2:5.4 nM, BCL-XL:6.0 nM
体外研究
(In Vitro)

BM 957 (Compound 30) with ethyl and compound 31 with isopropyl bind to both Bcl-2 and Bcl-xL with very high affinities. While BM 957 and 31 bind to Bcl-2 with IC50 values of 5.4 and 4.0 nM, respectively (Ki values=1.2 and 0.8 nM, respectively), they bind to Bcl-xL with IC50 values of 6.0 and 3.9 nM, respectively (Ki values < 1 nM). BM 957 has IC50 values of 21 nM and 22 nM, respectively, in these two cancer cell lines (H1417 and H146 cell lines). All these compounds induce cell death in a dose-dependent manner but have different potencies. While BM 957 and 31 are several times more potent than 1 and 2. BM 957 at 10 nM, 28 at 100 nM and 2 at 30 nM all induce clear cleavage of PARP and activation of caspase-3 and have similar effects. Hence, the potencies for these three compounds in induction of cleavage of PARP and activation of caspase-3 in the H146 cells are consistent with their potencies in induction of cell death.

体内研究
(In Vivo)

It is found that 28 at 50 mg/kg, BM 957 at 25 mg/kg and 31 at 10 mg/kg, daily, intravenous dosing, 5 days a week for 2 weeks are well tolerated in SCID mice and the animals have less than 10% of weight loss. Higher doses of these compounds (75 mg/kg for 28, 50 mg/kg for 30 and 25 mg/kg for 31) cause more than 10% of weight loss. Mice bearing H146 tumors are given a single i.v. dose of 28 at 50 mg/kg or BM 957 at 25 mg/kg. It showed that although compound 28 at 50 mg/kg effectively inhibits tumor growth, it fails to induce tumor regression. In contrast, BM 957 at 25 mg/kg is capable of achieving complete tumor regression. Of 7 mice treated with BM 957, all mice are tumor-free at day 47 and five (71%) remained tumor-free on day 58. Similar to the data obtained from our MTD experiment, both compounds 28 and BM 957 are well tolerated in tumor-bearing animals. All treated animals experienced less than 10% weight loss compared to the vehicle control and all regained their weight quickly after the treatments are finished. This in vivo experiment thus establish that BM 957 achieves complete and durable tumor regression in the H146 xenograft tumor model and is more efficacious than 28.

化学信息

分子量 1065.68
分子式 C52H56ClF3N6O7S3
CAS No. 1391107-54-2

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础