GSPT1 degrader-1

GSPT1 degrader-1 是一种对 GSPT1 具有高选择性的降解剂,可通过泛素-蛋白酶体系统诱导降解,诱导白血病细胞 G0/G1 期阻滞、细胞凋亡 (apoptosis) 和增殖,降低白血病细胞 CDK6 和 Cyclin B1 水平并升高活化的 caspase-3 和 caspase-9 水平,可用于白血病的研究。
产品编号: MS-P17012 CAS No.: 3037491-05-4 分子式: C28H33ClN4O5 分子量: 541.04
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

GSPT1 degrader-1 是一种对 GSPT1 具有高选择性的降解剂,可通过泛素-蛋白酶体系统诱导降解,诱导白血病细胞 G0/G1 期阻滞、细胞凋亡 (apoptosis) 和增殖,降低白血病细胞 CDK6 和 Cyclin B1 水平并升高活化的 caspase-3 和 caspase-9 水平,可用于白血病的研究。

生物实验数据

生物活性 GSPT1 degrader-1 is a highly selective degrader of GSPT1 that induces degradation via the ubiquitin-proteasome system, induces G0/G1 phase arrest, apoptosis, and proliferation in leukemia cells, decreases CDK6 and Cyclin B1 levels and increases activated caspase-3 and caspase-9 levels in leukemia cells, and can be used for the study of leukemia.
IC50 & Target

GSPT1

体外研究
(In Vitro)

GSPT1 degrader-1 (Compound 9q) (0-300 nM; 0-24 h) 可在 U937 急性髓系白血病细胞中强效诱导 GSPT1 呈剂量和时间依赖性降解,其 DC50 为 35 nM,GSPT1 的半衰期缩短至 6.3 h。
GSPT1 degrader-1 (0-300 nM; 6 h) 可在 MOLT-4 急性淋巴细胞白血病细胞和 MV4-11 急性髓系白血病细胞中强效诱导 GSPT1 的剂量依赖性降解。
GSPT1 degrader-1 (100 nM; 6 h) 可通过泛素-蛋白酶体系统诱导 U937 急性髓系白血病细胞中 GSPT1 的降解。
GSPT1 degrader-1 (72 h) 可强效抑制 U937、MOLT-4 和 MV4-11 白血病细胞的增殖,其 IC50 值分别为 0.019,0.006,0.027 μM性。
GSPT1 degrader-1 (0-100 nM; 24 h) 可在 U937 急性髓系白血病细胞中诱导剂量依赖性 G0/G1 期阻滞和细胞凋亡,同时伴随 CDK6 和细胞周期蛋白 B1 水平降低,以及活化的 caspase-3 和活化的 caspase-9 水平升高。

Western Blot Analysis

Cell Line: U937 acute myeloid leukemia cells
Concentration: 0, 3.7, 11.1, 33.3, 100, 300 nM (6 h incubation); 100 nM (0-24 h incubation); 100 nM (co-treated with 10 μM cycloheximide, 0-24 h incubation)
Incubation Time: 6 h (0-300 nM); 0, 2, 4, 6, 8, 12, 24 h (100 nM); 0-24 h (100 nM + 10 μM cycloheximide)
Result: Induced dose-dependent GSPT1 degradation, achieving a maximal degradation rate of 81.65% at 300 nM after 6 h.
Observed time-dependent degradation with significant depletion starting at 4 h and maximal degradation at 24 h with 100 nM treatment.
Shortened the biological half-life of GSPT1 from 53.4 h to 6.3 h when protein synthesis was blocked with cycloheximide.
Potently degraded GSPT1 with a DC50 of 35 nM in U937 cells.

Western Blot Analysis

Cell Line: MOLT-4 acute lymphocytic leukemia cells, MV4-11 acute myeloid leukemia cells
Concentration: 0, 3.7, 11.1, 33.3, 100, 300 nM
Incubation Time: 6 h
Result: Effectively induced dose-dependent degradation of GSPT1 in both MOLT-4 and MV4-11 leukemia cell lines.

Western Blot Analysis

Cell Line: U937 acute myeloid leukemia cells
Concentration: 100 nM (with 2 h pretreatment of 5 μM MG-132 (MS-L06849) or 5 μM MLN-4924 (MS-C57164))
Incubation Time: 6 h (with 2 h pretreatment)
Result: Increased the ubiquitination level of GSPT1 in U937 cells.
Allowed full rescue of GSPT1 protein levels from degradation when cells were pretreated with either the proteasome inhibitor MG-132 or the NEDD8-activating enzyme inhibitor MLN-4924.

Cell Cycle Analysis

Cell Line: U937 acute myeloid leukemia cells
Concentration: 0, 10, 30, 100 nM
Incubation Time: 24 h
Result: Induced dose-dependent G0/G1 phase arrest.

Apoptosis Analysis

Cell Line: U937 acute myeloid leukemia cells
Concentration: 0, 10, 30, 100 nM
Incubation Time: 24 h
Result: Induced apoptosis.

化学信息

分子量 541.04
分子式 C28H33ClN4O5
CAS No. 3037491-05-4

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础