NF-κB-IN-16 (compound 9) 是 NF-κB 抑制剂与 Cisplatin (MS-E94993) 的复合物 (Pt(IV) 复合物),具有高效低毒的抗肿瘤活性,可引起 DNA 损伤、诱导线粒体功能障碍、产生活性氧,并通过线粒体途径和内质网应激诱导细胞凋亡 (apoptosis),同时有效抑制 NF-κB/MAPK 信号通路并破坏 PI3K/AKT 信号转导,还在 A549 或 A549/CDDP 异种移植模型中展现出优异的体内抗肿瘤效率和低毒性。
NF-κB-IN-16
产品编号: MS-P10388 分子式: C26H35Cl3N2O10Pt 分子量: 837.01
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

NF-κB-IN-16 (compound 9) 是 NF-κB 抑制剂与 Cisplatin (MS-E94993) 的复合物 (Pt(IV) 复合物),具有高效低毒的抗肿瘤活性,可引起 DNA 损伤、诱导线粒体功能障碍、产生活性氧,并通过线粒体途径和内质网应激诱导细胞凋亡 (apoptosis),同时有效抑制 NF-κB/MAPK 信号通路并破坏 PI3K/AKT 信号转导,还在 A549 或 A549/CDDP 异种移植模型中展现出优异的体内抗肿瘤效率和低毒性。

生物实验数据

生物活性 NF-κB-IN-16 (compound 9) is a complex of an NF-κB inhibitor with Cisplatin (MS-E94993) (a Pt(IV) complex) that exhibits potent antitumor activity with low toxicity, induces DNA damage, mitochondrial dysfunction, and reactive oxygen species production, and triggers apoptosis (apoptosis) via the mitochondrial pathway and endoplasmic reticulum stress, while effectively inhibiting the NF-κB/MAPK signaling pathway and disrupting PI3K/AKT signal transduction, and also demonstrates excellent in vivo antitumor efficacy and low toxicity in A549 or A549/CDDP xenograft models.
体外研究
(In Vitro)

NF-κB-IN-16 (compound 9)(5 μM;24 h)诱导 A549 细胞凋亡,将细胞周期停滞在 S 期。
并且 NF-κB-IN-16 对人类表现出细胞毒性,对癌细胞的 IC50 值分别为 0.45 μM (HepG-2)、0.46 μM (HCT-116)、0.73 μM (MCF-7) 和 0.29 μM (A549)。
NF-κB-IN-16 (5 μM; 24 h) 可诱导 A549 细胞的 DNA 损伤。

Apoptosis Analysis

Cell Line: A549 cells
Concentration: 5 μM
Incubation Time: 24 h
Result: Showed the strongest cell apoptosis induction rate of 39.43% among cisplatin (5 μM), and the mixture of cisplatin and the Pt(IV) complex group.

Immunofluorescence

Cell Line: A549 cells
Concentration: 5 μM
Incubation Time: 24 h
Result: Observed long comet tail formation in the cisplatin, cisplatin/4 mixture, and Pt(IV) complex, in comet assay
Caused stronger DNA damage by Pt(IV) complex, than that caused by cisplatin (5 μM) or cotherapy, respectively.
体内研究
(In Vivo)

NF-κB-IN-16 (compound 9) (5, 13.9 mg/kg; ip; 21 d) 在 A549 异种移植裸鼠模型表现出优异的抗肿瘤功效,在两种剂量下的抑制率分别为 36.2% 和 63.7%。
NF-κB-IN-16 还对 A549/CDPP 异种移植裸鼠模型表现出显著的抑制作用。

Animal Model: A549 xenograft nude mice models
Dosage: 13.9 mg/kg, equal to the molar amount of cisplatin (5 mg/kg)
Administration: IP; once daily for 21 days
Result: Resulted stronger inhibition (72.7%) on tumor growth, than that of CDDP (60.4%) and the combination group (68.5%), respectively
Showed low toxicity side effect against mouse body weight.

化学信息

分子量 837.01
分子式 C26H35Cl3N2O10Pt

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础