WIZ degrader 9 是一种具有口服活性的 WIZ 转录因子分子胶降解剂,作为分子胶通过其 ZF7 结构域将 WIZ 招募至 cereblon E3 泛素连接酶复合物,驱动依赖蛋白酶体的 WIZ 降解,可诱导血红蛋白生成,降低全基因组及 β-珠蛋白基因座的 H3K9 二甲基化水平,上调 γ-globin 和 BGLT3 的转录,并提高 HBG1/2 启动子区域的组蛋白 H3K9 乙酰化水平,且在小鼠与食蟹猴体内能有效诱导胎儿血红蛋白生成,可用于镰状细胞病的研究。
产品编号: MS-O82674 纯度: 99.29% CAS No.: 2654011-51-3 分子式: C21H27N3O4 分子量: 385.46
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
3-5 天
100mg
询价
询价
200mg
询价
询价
500mg
询价
询价

产品描述

WIZ degrader 9 是一种具有口服活性的 WIZ 转录因子分子胶降解剂,作为分子胶通过其 ZF7 结构域将 WIZ 招募至 cereblon E3 泛素连接酶复合物,驱动依赖蛋白酶体的 WIZ 降解,可诱导血红蛋白生成,降低全基因组及 β-珠蛋白基因座的 H3K9 二甲基化水平,上调 γ-globin 和 BGLT3 的转录,并提高 HBG1/2 启动子区域的组蛋白 H3K9 乙酰化水平,且在小鼠与食蟹猴体内能有效诱导胎儿血红蛋白生成,可用于镰状细胞病的研究。

生物实验数据

生物活性 WIZ degrader 9 is an orally active molecular glue degrader of the WIZ transcription factor that, as a molecular glue, recruits WIZ to the cereblon E3 ubiquitin ligase complex via its ZF7 domain to drive proteasome-dependent WIZ degradation, induces hemoglobin production, reduces H3K9 dimethylation levels across the genome and at the β-globin locus, upregulates γ-globin and BGLT3 transcription, and increases histone H3K9 acetylation at the HBG1/2 promoter region, and effectively induces fetal hemoglobin production in mice and cynomolgus monkeys, making it useful for the study of sickle cell disease.
体外研究
(In Vitro)

WIZ degrader 9 (dWIZ-2 ) (10 μM; 7 days) 可在健康供者的原代人成红细胞中诱导剂量依赖性的 HbF,且不影响红系分化或增殖;在 10 μM 浓度下处理 7 天后,可使整体 H3K9me2 水平降低 15.4%。
WIZ degrader 9 (1-10 μM;作用至分化第 18 天) 可在镰状细胞病 (SCD) 患者的原代人红系祖细胞中诱导 WIZ 呈剂量依赖性降解并促进 HbF 表达;在 1 μM 浓度下可使总 HbF 升高至 35.5%,10 μM 浓度下升高至 45%,同时维持正常的红系分化与成熟。
WIZ degrader 9 (分化 1-7 天) 在全基因组范围及 β-珠蛋白基因座内降低 WIZ 的结合水平,减少抑制性 H3K9me2 修饰,提升胎儿珠蛋白基因启动子的激活性 H3K9ac 水平,在原代人成红细胞中上调包括胎儿珠蛋白相关基因 BGLT3 在内的基因表达。

体内研究
(In Vivo)

WIZ degrader 9 (1-100 mg/kg;口服;每日一次;连续 21 天) 可在人源化 NBSGW 小鼠中以剂量依赖方式诱导 WIZ 降解,并强效激活胎儿血红蛋白的表达;在 100 mg/kg 剂量下,测得的 HbF 最高水平为 19%,HbF 阳性成红细胞占比达 42%。
WIZ degrader 9 (30 mg/kg;口服;每日一次;持续 28 天) 可在健康食蟹猴中诱导 WIZ 的持续降解及胎儿血红蛋白的显著表达,应答动物体内 HbF+ 网织红细胞占比最高可达 90%,HbF+ 红细胞占比可达 20%。

Animal Model: NBSGW mice (immunocompromised, humanized with healthy human donor CD34+ hematopoietic stem and progenitor cells)
Dosage: 1 mg/kg; 3 mg/kg; 10 mg/kg; 30 mg/kg; 100 mg/kg
Administration: p.o.; daily; 21 days
Result: Induced dose-dependent WIZ degradation in bone marrow CD71+ human erythroblasts, with mean 65% degradation at the highest dose.
Increased the proportion of HbF+ human erythroblasts up to 42% at the highest dose, compared to vehicle control levels.
Reached HbF levels up to 19% at the highest dose, compared to <0.8% in vehicle controls.
Increased γ-globin mRNA transcript levels up to 26% of total β-like globin transcript, compared to 2% in vehicle controls.
Showed positive correlation between increase in HbF+ cells and fractional HbF expression measured by HPLC.
Animal Model: healthy, naïve
Dosage: 30 mg/kg
Administration: p.o.; daily; 28 days
Result: Induced rapid (within 6 hours), deep (>75%), and durable (>24 hours) WIZ degradation in peripheral blood CD3+ cells after the first dose.
Increased γ-globin mRNA levels to a median of 25% of total γ- and β-globin transcript (range 3 to 37% in responding animals) by day 28.
Increased HbF+ peripheral blood CD71+ reticulocytes to >90% in two of three responding animals by day 28.
Increased HbF+ red blood cells up to 20% in responding animals.
Was well-tolerated, with no significant changes to peripheral blood platelet counts, hematocrit, or neutrophil counts compared to pre-dose levels.
性状 固体
颜色 White to off-white

化学信息

分子量 385.46
分子式 C21H27N3O4
CAS No. 2654011-51-3

储存&溶解度

体内实验配方
10% DMSO+40% PEG300+5% Tween-80+45% Saline: 3.3 mg/mL (8.56 mM), Sonication is recommended.
请按顺序添加溶剂,在添加下一种溶剂之前,尽可能使溶液澄清。如有必要,可通过加热、超声、涡旋处理进行溶解。工作液建议现配现用。以上配方仅供参考,体内配方并不是绝对的,请根据不同情况进行调整。
储存方式

4°C, protect from light, stored under nitrogen

*In solvent: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 100 mg/mL (259.43 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM2.5943 mL12.9715 mL25.9430 mL64.8576 mL
5 mM0.5189 mL2.5943 mL5.1886 mL12.9715 mL
10 mM0.2594 mL1.2972 mL2.5943 mL6.4858 mL
15 mM0.1730 mL0.8648 mL1.7295 mL4.3238 mL
20 mM0.1297 mL0.6486 mL1.2972 mL3.2429 mL
25 mM0.1038 mL0.5189 mL1.0377 mL2.5943 mL
30 mM0.0865 mL0.4324 mL0.8648 mL2.1619 mL
40 mM0.0649 mL0.3243 mL0.6486 mL1.6214 mL
50 mM0.0519 mL0.2594 mL0.5189 mL1.2972 mL
60 mM0.0432 mL0.2162 mL0.4324 mL1.0810 mL
80 mM0.0324 mL0.1621 mL0.3243 mL0.8107 mL
100 mM0.0259 mL0.1297 mL0.2594 mL0.6486 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础