hIMB1636 是一种靶向 Trop2 的人源化单克隆抗体,通过结合构象型 Trop2 表位调控相关信号通路,触发溶酶体内吞作用,进而诱导细胞凋亡、细胞周期阻滞及抗体依赖的细胞毒性作用,能有效抑制肿瘤细胞增殖、迁移及体内肿瘤生长,还能产生旁观者杀伤效应并介导长效滞留,可与 NOTA/DOTA 偶联进行放射性标记以实现免疫 PET 成像,或制备为 hIMB1636-LDP-AE 以显著抑制乳腺癌和肺癌异种移植瘤的生长。
hIMB1636
产品编号: MS-O56187
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
询价
5mg
询价
询价
10mg
询价
询价

产品描述

hIMB1636 是一种靶向 Trop2 的人源化单克隆抗体,通过结合构象型 Trop2 表位调控相关信号通路,触发溶酶体内吞作用,进而诱导细胞凋亡、细胞周期阻滞及抗体依赖的细胞毒性作用,能有效抑制肿瘤细胞增殖、迁移及体内肿瘤生长,还能产生旁观者杀伤效应并介导长效滞留,可与 NOTA/DOTA 偶联进行放射性标记以实现免疫 PET 成像,或制备为 hIMB1636-LDP-AE 以显著抑制乳腺癌和肺癌异种移植瘤的生长。

生物实验数据

生物活性 hIMB1636 is a humanized monoclonal antibody targeting Trop2 that modulates related signaling pathways by binding to a conformational Trop2 epitope, triggers lysosomal endocytosis, and thereby induces apoptosis, cell cycle arrest, and antibody-dependent cellular cytotoxicity; it effectively inhibits tumor cell proliferation, migration, and in vivo tumor growth, and also produces a bystander killing effect and mediates long-term retention; it can be conjugated with NOTA/DOTA for radiolabeling to enable immuno-PET imaging, or prepared as hIMB1636-LDP-AE to significantly inhibit the growth of breast cancer and lung cancer xenografts.
体外研究
(In Vitro)

hIMB1636 (1.56-50 nM) 与重组人 Trop2 蛋白结合,其 Kd 值为 0.603 nM。
hIMB1636 (5-10 μM; 72 h) 可以 Trop2 依赖的方式强效抑制 MDA-MB-468 和 MDA-MB-231 细胞的增殖,且活性优于 sacituzumab。
hIMB1636 (5-10 μM; 36 h (MDA-MB-468); 12 h (MDA-MB-231)) 以依赖于 Trop2 的方式抑制 MDA-MB-468 和 MDA-MB-231 细胞的迁移。
hIMB1636 (5 μM; 24 h) 可通过上调活化的 caspase-9、活化的 caspase-3 及活化的 PARP,在 MDA-MB-468 和 MDA-MB-231 细胞中诱导 caspase 依赖性细胞凋亡。
hIMB1636 (5 μM; 24 h) 可显著提高 MDA-MB-468 和 MDA-MB-231 细胞中凋亡细胞的比例。
hIMB1636 可特异性结合 T3M-4 胰腺癌细胞;在受试胰腺癌细胞系中,该细胞的 Trop2 表达水平最高。

Cell Proliferation Assay

Cell Line: MDA-MB-468, MDA-MB-231
Concentration: 5 μM, 10 μM
Incubation Time: 72 h
Result: Inhibited cell proliferation in a dose-dependent manner in MDA-MB-468 cells, with 10 μM hIMB1636 reducing proliferation to 22.60% of control levels.
Reduced proliferation to ~15% of control levels in MDA-MB-231 cells at both 5 μM and 10 μM, indicating saturation of surface Trop2 at the lower concentration.
Exhibited significantly stronger proliferation inhibition than sacituzumab at matching concentrations in both cell lines.

Western Blot Analysis

Cell Line: MDA-MB-468, MDA-MB-231
Concentration: 5 μM
Incubation Time: 24 h
Result: Reduced expression of cyclin D1 and CDK6, and increased expression of P21, compared to control cells.\nUpregulated expression of cleaved caspase-9, cleaved caspase-3, and cleaved PARP, indicating activation of the caspase-dependent apoptotic pathway.

Apoptosis Analysis

Cell Line: MDA-MB-468, MDA-MB-231
Concentration: 5 μM
Incubation Time: 24 h
Result: Significantly increased the ratio of early and late apoptotic cells in both cell lines, with MDA-MB-468 cells showing an increase from 8.25% to 12.89% apoptotic cells, and MDA-MB-231 cells showing an increase from 3.70% to 11.05% apoptotic cells.
体内研究
(In Vivo)

hIMB1636 (0.8 mg/kg; 静脉注射; 每 5 天 1 次; 共注射 4 次) 在 HCC827 肺癌异种移植模型中无抗肿瘤功效,肿瘤生长情况与对照组一致,且未出现显著体重下降。
hIMB1636 (25-50 mg/kg;静脉注射;每 5 天 1 次;共 4 剂) 在 MDA-MB-468 异种移植模型中展现出强效的体内抗肿瘤活性,在 50 mg/kg 剂量下肿瘤抑制率达 61.4%,25 mg/kg 剂量下达 58.2%。

Animal Model: BALB/c nude (6-week-old female; HCC827 cells injected subcutaneously into right flank)
Dosage: 0.8 mg/kg
Administration: i.v.; every five days; 4 total injections
Result: Showed no antitumor effects, with tumor volumes similar to that of the control group.
Caused no significant body weight loss.
Animal Model: BALB/c nude (6-week-old female)
Dosage: 50 mg/kg; 25 mg/kg
Administration: i.v.; every 5 days; 4 total doses
Result: Produced a tumor inhibition rate of 61.4% at 50 mg/kg on day 37 post-tumor implantation.
Produced a tumor inhibition rate of 58.2% at 25 mg/kg on day 37 post-tumor implantation.
Caused no significant weight loss.

化学信息

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础