SF-3-030 是一种强效、选择性且非 ATP 竞争性的 ERK1/2 抑制剂,可在携带突变型 BRaf 且 ERK1/2 信号通路持续活化的黑色素瘤细胞中选择性诱导细胞凋亡 (apoptosis),并在哮喘的鼠类模型中缓解多种哮喘的病理特征,因此可用于哮喘和黑色素瘤的研究。
产品编号: MS-O20374 CAS No.: 1883721-73-0 分子式: C14H12O5S2 分子量: 324.37
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

SF-3-030 是一种强效、选择性且非 ATP 竞争性的 ERK1/2 抑制剂,可在携带突变型 BRaf 且 ERK1/2 信号通路持续活化的黑色素瘤细胞中选择性诱导细胞凋亡 (apoptosis),并在哮喘的鼠类模型中缓解多种哮喘的病理特征,因此可用于哮喘和黑色素瘤的研究。

生物实验数据

生物活性 SF-3-030 is a potent, selective, and non-ATP-competitive ERK1/2 inhibitor that selectively induces apoptosis in melanoma cells harboring mutant BRaf with constitutively activated ERK1/2 signaling, alleviates multiple pathological features of asthma in murine models of asthma, and can be used for research on asthma and melanoma.
IC50 & Target

ERK1

 

ERK2

 

体外研究
(In Vitro)

SF-3-030 (2.5-60 μM;30 分钟) 在体外选择性抑制 ERK2 介导的 c-Fos 上 F 位点依赖性 Thr325 残基的磷酸化,对含有 D 结构域的底物 (RSK1) 或 p38α 介导的 ATF2 磷酸化无影响。
SF-3-030 (1-100 μM;20 分钟-5 小时) 抑制 EGF/PMA 刺激的 HeLa/HEK293 细胞中的 AP-1 和 SRE 启动子活性,并抑制 A375 黑色素瘤细胞中的基础 AP-1 活性,对 PMA 诱导的反应表现出比对 EGF 诱导的反应更强的效力。
SF-3-030 (5-100 μM;30 分钟-1 小时) 选择性抑制 EGF/PMA (MS-C34076) 诱导的 HeLa 和 A375 细胞中含 F-位点的即刻早期基因 (c-Fos, Fra1, FosB, FosB2, c-Myc) 的表达,对非 F-位点即刻早期基因 (c-Jun, Egr1) 的影响最小。
SF-3-030 (1-100 μM;24 小时) 选择性抑制具有组成型 ERK1/2 活性的黑色素瘤细胞 (A375, RPMI7951) 的增殖并诱导其凋亡,其 GI50 值分别为 7.1 和 4.6 μM,而在 Jurkat 细胞中表现出选择性,其 GI50 > 50 μM)。

Western Blot Analysis

Cell Line: HeLa cells
Concentration: 5, 10, 20, 35, 40, 70, 100
Incubation Time: 30 min pretreatment
Result: Inhibited induction of c-Fos, FosB, FosB2, Fra1, and c-Myc in a dose-dependent manner in EGF-stimulated HeLa cells.
Showed less effect on c-Jun and Egr1 and inhibited c-Fos phosphorylation at Ser32 but not Ser374 in EGF-stimulated HeLa cells.
Inhibited c-Fos phosphorylation at Thr232 and Ser32 but not Ser374 and reduced FosB, FosB2, Fra1, and c-Myc expression
in PMA-stimulated HeLa cells.

Western Blot Analysis

Cell Line: A375 melanoma cells
Concentration: 5, 25, 35, 50 μM
Incubation Time: 1 h
Result: Inhibited basal expression of c-Fos, FosB, FosB2, Fra1, and c-Myc but not Egr1.
体内研究
(In Vivo)

SF-3-030 (10 mg/kg; i.n.; 在每次 HDM 刺激前 30 分钟给药;每周 5 天,持续 3 周) 可减轻屋尘螨 (HDM) 诱导的小鼠哮喘模型的多项病理特征。

Animal Model: Balb/c mice (8-10-week-old) challenged with HDM
Dosage: 10 mg/kg
Administration: i.n.; 30 min before each HDM challenge; 5 days a week for 3 weeks
Result: Significantly attenuated HDM-induced airway inflammation.
Inhibited induction of airway remodeling (AR) by
repeated allergen challenge.
Inhibited the development of HDM-induced airway inflammation hyperresponsiveness (AHR).
Modulated gene expression profile in lung.
Modulated profile of proteins involved in multiple pathways in the lung.

化学信息

分子量 324.37
分子式 C14H12O5S2
CAS No. 1883721-73-0

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础