OH14 是一种细胞 FLICE 样抑制蛋白 (cFLIP) 抑制剂和肿瘤坏死因子相关凋亡诱导配体 (TRAIL) 增敏剂,可选择性结合 cFLIP 的 DED1 口袋,破坏其向 TRAIL 死亡诱导信号复合物的募集,且不影响 procaspase-8 向 FADD 的募集,从而实现 procaspase-8 的激活;与 TRAIL 联合使用时,OH14 可在乳腺癌体系中促进 TRAIL 介导的细胞凋亡 (apoptosis) 并降低细胞活力,因此可用于乳腺癌的相关研究。
产品编号: MS-O07079 CAS No.: 1018153-87-1 分子式: C14H11Cl2NO4S 分子量: 360.21
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

OH14 是一种细胞 FLICE 样抑制蛋白 (cFLIP) 抑制剂和肿瘤坏死因子相关凋亡诱导配体 (TRAIL) 增敏剂,可选择性结合 cFLIP 的 DED1 口袋,破坏其向 TRAIL 死亡诱导信号复合物的募集,且不影响 procaspase-8 向 FADD 的募集,从而实现 procaspase-8 的激活;与 TRAIL 联合使用时,OH14 可在乳腺癌体系中促进 TRAIL 介导的细胞凋亡 (apoptosis) 并降低细胞活力,因此可用于乳腺癌的相关研究。

生物实验数据

生物活性 OH14 is a cellular FLICE-like inhibitory protein (cFLIP) inhibitor and tumor necrosis factor-related apoptosis-inducing ligand (TRAIL) sensitizer that selectively binds to the DED1 pocket of cFLIP, disrupting its recruitment to the TRAIL death-inducing signaling complex without affecting the recruitment of procaspase-8 to FADD, thereby enabling procaspase-8 activation; when combined with TRAIL, OH14 promotes TRAIL-mediated apoptosis and reduces cell viability in breast cancer systems, and can therefore be used for related research on breast cancer.
体外研究
(In Vitro)

OH14 (75-100 μM; 1 h) 可使 MCF-7 乳腺癌细胞和 HeLa 细胞以剂量依赖的方式对 TNF-related apoptosis-inducing ligand (TRAIL) 诱导的细胞凋亡增敏,该效应分别通过活化的 caspase 3/7 活性升高和 Annexin V 染色结果得到验证。
OH14 (100 μM; 1 h) 需要 cFLIP 中的 R38 残基才能使 HeLa 细胞对 TRAIL 诱导的细胞凋亡增敏,而野生型、H7A 或 K18I/R45A 突变体 cFLIP 的过表达不会削弱该增敏活性。
OH14 (100 μM; 1 h) 可显著增强 MCF-7、BT474 和 MDA-MB-231 乳腺癌细胞系对 TRAIL 诱导的细胞死亡的敏感性,对其他乳腺癌亚型的作用存在差异。
OH14 (100 μM; 1 h) 可破坏 HeLa 细胞中 TRAIL 介导的 cFLIP 向 FADD 的募集,这一点可通过 cFLIP-YFP 与 FADD-CFP 之间 FRET 信号的丧失得到验证。
OH14 (100 μM; 1 h) 可在 MCF-7 细胞中特异性破坏 TRAIL 介导的 cFLIP 向 FADD 复合物的募集,同时不影响 procaspase-8 的切割与激活。
OH14 (10 μM; 10 days) 可使 MCF-7 乳腺癌细胞对 TRAIL 诱导的集落形成减少作用增敏,单独给药时则不影响集落生长。
OH14 (10 μM; 24 h) 对非致瘤性人胚肾细胞 HEK293 无毒性,无论单独使用还是与 TRAIL 联合使用。

Apoptosis Analysis

Cell Line: MCF-7 breast cancer cells, HeLa cells
Concentration: 75 μM, 100 μM
Incubation Time: 1 h pre-incubation, followed by 24 h TRAIL treatment
Result: Observed a dose-dependent sensitization effect.
Significantly increased cleaved caspase 3/7 activity in MCF-7 cells.
Significantly increased Annexin V staining in HeLa cells.

Cell Viability Assay

Cell Line: Panel of breast cancer cell lines: MCF-7, BT474, MDA-MB-231, HCC1954, SUM149
Concentration: 100 μM
Incubation Time: 1 h pre-incubation, followed by 18 h TRAIL treatment
Result: Significantly sensitized MCF-7, BT474, and MDA-MB-231 breast cancer cell lines to TRAIL.
Observed similar but statistically insignificant trends in HCC1954 and SUM149 cells.

Western Blot Analysis

Cell Line: MCF-7 breast cancer cells
Concentration: 100 μM
Incubation Time: 1 h pre-incubation, followed by 2 h TRAIL treatment
Result: Disrupted the TRAIL-induced interaction between FADD and both short and long forms of cFLIP.
Did not inhibit the interaction between FADD and procaspase-8.
Increased the ratio of cleaved cFLIP (43 kDa) to noncleaved cFLIP (55 kDa).
Induced cleavage of procaspase-8 to its active 43 kDa form when combined with TRAIL.

化学信息

分子量 360.21
分子式 C14H11Cl2NO4S
CAS No. 1018153-87-1

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础