VEGFR2-IN-86 是一种双重 VEGFR2/CDK2 抑制剂,对 VEGFR2 的 IC50 为 0.06 μM,对 CDK2 的 IC50 为 0.78 μM,可诱导 G 期细胞周期阻滞,降低集落形成能力与肿瘤细胞迁移能力,在癌细胞中发挥抗增殖活性,并可用于乳腺癌、前列腺癌的研究。
VEGFR2-IN-86
产品编号: MS-N78475 分子式: C20H15N3O2 分子量: 329.35
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

VEGFR2-IN-86 是一种双重 VEGFR2/CDK2 抑制剂,对 VEGFR2 的 IC50 为 0.06 μM,对 CDK2 的 IC50 为 0.78 μM,可诱导 G 期细胞周期阻滞,降低集落形成能力与肿瘤细胞迁移能力,在癌细胞中发挥抗增殖活性,并可用于乳腺癌、前列腺癌的研究。

生物实验数据

生物活性 VEGFR2-IN-86 is a dual VEGFR2/CDK2 inhibitor with an IC50 of 0.06 μM for VEGFR2 and an IC50 of 0.78 μM for CDK2 that induces G phase cell cycle arrest, reduces colony formation ability and tumor cell migration ability, exerts antiproliferative activity in cancer cells, and can be used for research on breast cancer and prostate cancer.
IC50 & Target

VEGFR2

0.06 μM (IC50)

CDK2

0.78 μM (IC50)

体外研究
(In Vitro)

VEGFR2-IN-86 (Compound 10) (48 h) 可强效抑制 PC3 和 MCF7 细胞的活力, IC50 为 5.39 和 4.71 μM。
VEGFR2-IN-86 (5.39 和 4.71 μM; 48 h) 在以其 IC50 浓度作用 48 小时后,可诱导 PC3 和 MCF7 细胞发生凋亡。
VEGFR2-IN-86 (5.39 和 4.71 μM; 48 h) 不会显著改变 PC3 和 MCF7 细胞的细胞周期时相分布。
VEGFR2-IN-86 (5.39 和 4.71 μM; 48 h) 当其以 IC50 浓度作用 48 小时时,可强效抑制 PC3 和 MCF7 细胞的长期克隆形成存活能力。
VEGFR2-IN-86 (5.39 和 4.71 μM; 48 h) 抑制PC3 和 MCF7 细胞迁移。

Cell Cycle Analysis

Cell Line: PC3 prostate cancer cell line
Concentration: 5.39 μM (IC50)
Incubation Time: 48 h
Result: Resulted in a cell cycle phase distribution pattern comparable to untreated control cells, with no significant alteration in G1, S, or G2/M phase populations relative to control.

Cell Cycle Analysis

Cell Line: MCF7 breast cancer cell line
Concentration: 4.71 μM (IC50)
Incubation Time: 48 h
Result: Produced no significant alterations in G1, S, or G2/M phase populations relative to untreated control cells.

Cell Proliferation Assay

Cell Line: PC3 prostate cancer cell line
Concentration: 5.39 μM (IC50)
Incubation Time: 48 h (treatment); 14 days (colony formation)
Result: Markedly suppressed colony formation, resulting in a surviving fraction significantly lower than that of untreated control cells.

Cell Proliferation Assay

Cell Line: MCF7 breast cancer cell line
Concentration: 4.71 μM (IC50)
Incubation Time: 48 h (treatment); 14 days (colony formation)
Result: Markedly suppressed colony formation, resulting in a surviving fraction significantly lower than that of untreated control cells.

Cell Migration Assay

Cell Line: PC3 prostate cancer cell line
Concentration: 5.39 μM (IC50)
Incubation Time: 48 h
Result: Resulted in a scratch closure percentage of 73%, showing a slight reduction compared to the untreated control's 78% closure.

Cell Migration Assay

Cell Line: MCF7 breast cancer cell line
Concentration: 4.71 μM (IC50)
Incubation Time: 48 h
Result: Resulted in a scratch closure percentage of 26%, showing a marked reduction compared to the untreated control's 64% closure.

化学信息

分子量 329.35
分子式 C20H15N3O2

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础