ATTO 740 NHS ester

ATTO 740 NHS ester 是一种具有优异近红外发射特性和极高光稳定性的近红外荧光染料及多模态荧光/光声造影剂,经 750 nm 激光持续照射 30 min 后其光声信号仍无显著下降,适用于体内荧光成像与光声造影,且与胱氨酸结肽 R01 偶联后能够在裸鼠异种移植模型中精准检测整合素 αvβ6 阳性细胞和肿瘤。
产品编号: MS-N75186 CAS No.: 1448146-89-1
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

ATTO 740 NHS ester 是一种具有优异近红外发射特性和极高光稳定性的近红外荧光染料及多模态荧光/光声造影剂,经 750 nm 激光持续照射 30 min 后其光声信号仍无显著下降,适用于体内荧光成像与光声造影,且与胱氨酸结肽 R01 偶联后能够在裸鼠异种移植模型中精准检测整合素 αvβ6 阳性细胞和肿瘤。

生物实验数据

生物活性 ATTO 740 NHS ester is a near-infrared fluorescent dye and multimodal fluorescence/photoacoustic contrast agent with excellent near-infrared emission properties and extremely high photostability, whose photoacoustic signal shows no significant decline after continuous irradiation with a 750 nm laser for 30 min, making it suitable for in vivo fluorescence imaging and photoacoustic imaging, and upon conjugation with the cystine-knot peptide R01, it enables precise detection of integrin αvβ6-positive cells and tumors in nude mouse xenograft models.
IC50 & Target

αvβ6

 

体外研究
(In Vitro)

ATTO 740 NHS ester (10 mg/mL; 1 h) 可成功与 R01 肽的 N 端氨基偶联形成 A740-R01,该产物与整合素 αᵥβ6 结合的 IC50 为 39.4 nM。

体内研究
(In Vivo)

A740-R01 偶联物 (200 μL, 6×10-5 M;静脉注射;单次),由 ATTO 740 NHS 酯合成,可实现整合素 αvβ6 阳性肿瘤的特异性检测;注射后 1 h,阳性异种移植物中的光声信号较基线升高 2 倍,荧光信号较基线升高 8 倍。

Animal Model: nude mice model (8-week-old female, Charles River)
Dosage: 200 μL of 6×10-5 M A740-R01
Administration: i.v.; single dose
Result: Produced a 2-fold photoacoustic signal increase (1.87 arbitrary units vs. baseline 0.99 arbitrary units) in integrin αvβ6-positive A431 xenografts 1 h after injection.
Produced an 8-fold fluorescence signal increase (8.27 arbitrary units vs. baseline 1.01 arbitrary units) in integrin αvβ6-positive A431 xenografts 1 h after injection.
Showed no significant photoacoustic signal changes (pre-injection: 0.96 arbitrary units; 1 h post-injection: 1.07 arbitrary units) in integrin αvβ6-negative 293T xenografts.
Showed no significant fluorescence signal changes (pre-injection: 1.00 arbitrary units; 1 h post-injection: 1.10 arbitrary units) in integrin αvβ6-negative 293T xenografts.
Exhibited the highest maximum radiance in the liver, followed by the intestines, spleen, and kidneys in ex vivo fluorescence imaging 1 h after injection.
Detected increased photoacoustic signal in the liver at 1 h after injection, temporally dependent increases in intestinal signals peaking at 4 h, and minimal renal contrast throughout the study.

化学信息

CAS No. 1448146-89-1

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础