Angiotensin II human acetate

Synonyms: Angiotensin II acetate; Ang II acetate; DRVYIHPF acetate
Angiotensin II human (Angiotensin II) acetate 是一种血管收缩剂,是肾素/血管紧张素系统的主要生物活性肽,在调节人类血压中起核心作用,主要通过血管紧张素 II 与 G 蛋白偶联受体 (GPCRs)、血管紧张素 II 1 型受体 (AT1R) 和血管紧张素 II 2 型受体 (AT2R) 之间的相互作用来介导,同时可刺激交感神经、增加醛固酮生物合成和肾脏活动,诱导血管平滑肌细胞生长并增加成纤维细胞中 I 型和 III 型胶原的合成,导致血管壁和心肌增厚及纤维化,还可诱导细胞凋亡,并通过 LOX-1 依赖的氧化还原敏感途径诱导内皮细胞毛细血管形成。
产品编号: MS-N47820 纯度: 99.80% CAS No.: 68521-88-0 分子式: C52H75N13O14 分子量: 1106.23
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
3-5 天
100mg
询价
3-5 天
500mg
询价
询价
1g
询价
询价
5g
询价
询价

产品描述

Angiotensin II human (Angiotensin II) acetate 是一种血管收缩剂,是肾素/血管紧张素系统的主要生物活性肽,在调节人类血压中起核心作用,主要通过血管紧张素 II 与 G 蛋白偶联受体 (GPCRs)、血管紧张素 II 1 型受体 (AT1R) 和血管紧张素 II 2 型受体 (AT2R) 之间的相互作用来介导,同时可刺激交感神经、增加醛固酮生物合成和肾脏活动,诱导血管平滑肌细胞生长并增加成纤维细胞中 I 型和 III 型胶原的合成,导致血管壁和心肌增厚及纤维化,还可诱导细胞凋亡,并通过 LOX-1 依赖的氧化还原敏感途径诱导内皮细胞毛细血管形成。

生物实验数据

生物活性 Angiotensin II human (Angiotensin II) acetate is a vasoconstrictor and the primary bioactive peptide of the renin/angiotensin system, playing a central role in regulating human blood pressure mainly through interactions between angiotensin II and G protein-coupled receptors (GPCRs), angiotensin II type 1 receptor (AT1R), and angiotensin II type 2 receptor (AT2R), while stimulating sympathetic nerve activity, increasing aldosterone biosynthesis and renal activity, inducing vascular smooth muscle cell growth and increasing type I and type III collagen synthesis in fibroblasts, leading to vascular wall and myocardial thickening and fibrosis, and also inducing apoptosis and endothelial cell capillary formation through a LOX-1-dependent redox-sensitive pathway.
IC50 & Target

AT2 Receptor

 

AT1 Receptor

 

体外研究
(In Vitro)

Most of the known actions of Angiotensin II (Ang II) human acetate are mediated by AT1 receptors, the AT2 receptor contributes to the regulation of blood pressure and renal function.
Angiotensin II human acetate raises blood pressure (BP) by a number of actions, the most important ones being vasoconstriction, sympathetic nervous stimulation, increased aldosterone biosynthesis and renal actions. Other Angiotensin II human acetate actions include induction of growth, cell migration, and mitosis of vascular smooth muscle cells, increased synthesis of collagen type I and III in fibroblasts, leading to thickening of the vascular wall and myocardium, and fibrosis. These actions are mediated by type 1 Ang II receptors (AT1).
Angiotensin II (1 nM) induces the expression of LOX-1 and VEGF and enhances capillary formation from human coronary endothelial cells in Matrigel assay. Angiotensin II -mediated expression of LOX-1 and VEGF, capillary formation, intracellular reactive oxygen species generation, and phosphorylation of p38 as well as p44/42 mitogen-activated protein kinases, were suppressed by anti-LOX-1 antibody, nicotinamide-adenine dinucleotide phosphate oxidase inhibitor apocynin and the Ang II type 1 receptor blocker Losartan, but not by the Ang II type 2 receptor blocker PD123319.

体内研究
(In Vivo)

注意:
请勿仅参考一篇文章来确定实验条件。建议在正式实验前,通过预实验确定最佳实验条件 (动物品系、年龄、剂量、频率及周期、检测时间及指标等)。

Angiotensin II human (acetate) 可用于诱导高血压、心脏肥大和腹主动脉瘤模型。

Angiotensin II (acetate) 通过受体介导的内吞作用被各种细胞类型内化,在心脏、肾脏和肾上腺等组织大量富集。骨骼肌组织中浓度为血浆浓度的 8%-41%,心脏为 64%-150%,肾脏为 340%-550%,肾上腺则高达 680%-2100%。血浆中的 Angiotensin II (acetate) 达到稳态浓度仅需约 5 分钟,而组织中达到稳态浓度需要 30-60 分钟。循环系统中 Angiotensin II (acetate) 的半衰期极短 (约 0.5 分钟),而在心脏、肾脏和肾上腺组织中,内吞后形成的 Angiotensin II (acetate) 的体内半衰期显著延长至约 15 分钟。
1. 诱发高血压
致病原理
Angiotensin II human 通过激活 AT1 受体,引起血管收缩、钠水潴留、交感神经激活及氧化应激,导致血压升高。
具体造模方法:
小鼠:C57/BL6J • 雄性&雌性 • 12-16 周龄 • 21-27 g
给药方式:800 ng/kg/min, 0.003 mL/min • 7 天 • sc,皮下植入渗透泵
Note
性别的影响:慢性 ANG II 诱发的高血压,在清醒小鼠中存在性别差异。雌性小鼠可能免受 ANG II 引起的血压升高的影响。
造模成功指标
关键因素:血压↑ 第7天,男性血压高于女性。
2. 诱发心脏肥大
致病原理
Angiotensin II humanAng II 通过激活 AT1 受体,引发炎症、氧化应激和细胞外基质重塑,导致心肌细胞增生和肥厚。
具体造模方法:
小鼠:C57/BL6J • 雄性 • 8 周龄 •
给药方式:2 μg/kg/min • 4 周龄 • sc, osmotic pump implanted subcutaneously
Note
造模成功指标
指标变化:WT小鼠血压明显升高。
外观监测:心脏肥大和纤维化。
拮抗产品:Eplerenone (MS-X36449)
3. 腹主动脉瘤模型
致病原理
Angiotensin II 通过刺激单核细胞募集、巨噬细胞激活以及增强氧化应激来引起动脉粥样硬化,最终导致小鼠腹主动脉局部扩张、变薄,形成腹主动脉瘤。
具体造模方法
小鼠:ApoE–/– 小鼠 • 雌性 • 6 月龄
给药方式:500 或 1000 ng/min/kg • 皮下 • 28 天
造模成功指标
细胞变化:增加主动脉内膜的载脂巨噬细胞和淋巴细胞。
表型观测:存在大量动脉粥样硬化病变。主动脉腹部区域尺寸显著增大,存在大量外膜组织,并且外膜组织内存在血凝块,外表面出现新生血管出现。
拮抗产品:(+/-)-硫酸氢氯吡格雷 (MS-W49411)

性状 固体
颜色 White to off-white

化学信息

分子量 1106.23
分子式 C52H75N13O14
CAS No. 68521-88-0
别名 Angiotensin II acetate; Ang II acetate; DRVYIHPF acetate

储存&溶解度

储存方式

Sealed storage, away from moisture and light, under nitrogen

Powder -80°C 2 years
-20°C 1 year

*In solvent: -80°C, 1 year; -20°C, 6 months (sealed storage, away from moisture and light, under nitrogen)

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

H2O 中的溶解度 : 5 mg/mL (4.52 mM; ultrasonic and warming and heat to 37°C)

可选溶剂浓度1 mg5 mg10 mg25 mg
H2O1 mM0.9040 mL4.5199 mL9.0397 mL22.5993 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 1 year; -20°C, 6 months (sealed storage, away from moisture and light, under nitrogen)。-80°C储存时,请在1年内使用, -20°C储存时,请在6个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础