β-catenin-IN-3

β-catenin-IN-3 (Compound C2) 是一种选择性 β-catenin 抑制剂,其与 β-catenin 表面的新型变构位点结合(KD 值为 54.96 nM),通过靶向该隐蔽的变构调节位点选择性抑制 β-catenin 并降低其细胞负荷,同时显著降低 β-catenin 驱动的癌细胞的活力,并在 β-catenin 过表达癌细胞中通过蛋白酶体系统触发其降解。
产品编号: MS-N39210 纯度: 95.64% CAS No.: 1005288-15-2 分子式: C19H20Br2N2Os 分子量: 484.25
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
询价
50mg
询价
询价
100mg
询价
询价

产品描述

β-catenin-IN-3 (Compound C2) 是一种选择性 β-catenin 抑制剂,其与 β-catenin 表面的新型变构位点结合(KD 值为 54.96 nM),通过靶向该隐蔽的变构调节位点选择性抑制 β-catenin 并降低其细胞负荷,同时显著降低 β-catenin 驱动的癌细胞的活力,并在 β-catenin 过表达癌细胞中通过蛋白酶体系统触发其降解。

生物实验数据

生物活性 β-catenin-IN-3 (Compound C2) is a selective β-catenin inhibitor that binds to a novel allosteric site on the surface of β-catenin with a KD value of 54.96 nM, selectively inhibits β-catenin and reduces its cellular burden by targeting this cryptic allosteric regulatory site, and significantly decreases the viability of β-catenin-driven cancer cells while triggering its degradation through the proteasome system in β-catenin-overexpressing cancer cells.
IC50 & Target

Cdk4/cyclin D1

 

体外研究
(In Vitro)

β-catenin-IN-3 (24 h)以剂量依赖性方式降低 DLD1,SW480,HCT116,SW48,MCF10A 和 H460 细胞的活力,IC50s为 0.85 μM、1.35 μM、5.35 μM、3.45 μM 和 20 μM 以上。。
β-catenin-IN-3 (1 μM,3 μM,7 天) 抑制 DLD1 和 SW48 细胞的集落形成能力。。
β-catenin-IN-3 (0,1,5 μM,24 h) 以剂量依赖的方式选择性抑制 DLD1 和 SW480 细胞中 β-catenin、 Axin1、 CyclinD1 和 TCF4 的水平。
β-catenin-IN-3 (1 μM,3 h) 在 DLD1 细胞中通过泛素-蛋白酶体机制触发 β-catenin 的降解,可能是通过募集 APC 介导的破坏复合物。
β-catenin-IN-3 (1 μM,1-24 h) 增加 DLD1 细胞中 β-catenin 的磷酸化。 β-catenin-IN-3 (1,5 μM,24 h) 分别降低了细胞核和细胞质中的 β-catenin 45%,40%,85% 和 55%。
β-catenin-IN-3 (3,5 μM, 4 天) 抑制 APC 缺陷类器官克隆形成能力约 70% 和 55%,相反,野生型类器官的存活率为90%。

MCE has not independently confirmed the accuracy of these methods. They are for reference only.

Cell Viability Assay

Cell Line: DLD1,SW4808, HCT116, SW48, MCF10A, H460 cells
Concentration: 10 nM-100 μM
Incubation Time: 24 h
Result: Reduced viability of DLD1 and SW480 cells in dose-dependent manner with IC50s of 0.85 μM and 1.35 μM.
Reduced viability of HCT116 and SW48 cells in dose-dependent manner with IC50s of 5.35 μM and 3.45 μM.
Impacted two WNT-independent cell lines, MCF10A and H460, with IC50 above 20μM.

Western Blot Analysis

Cell Line: DLD1 cells
Concentration: 1μM
Incubation Time: 1,3,6,12,24 h
Result: Phosphorylated β-catenin starting at 1 hour point, which was further amplified to 2-2.5-fold at 12 and 24 hour points, and can be blocked by CHIR99021 (MS-W05653).
Levels of active β-catenin markedly reduced at these time points, and can be arrested by MG132 (MS-L06849).

Immunofluorescence

Cell Line: DLD1 cells
Concentration: 1 μM
Incubation Time: 24 h
Result: Reduced β-catenin that co-localized with nucleic acids inside the nucleus by 55-60% (co-localization dropped from 0.62 to 0.25).
体内研究
(In Vivo)

β-catenin-IN-3 (25 mg/kg, i.p., 35 天) 显著降低 DLD1 异种移植模型中β-catenin 依赖性肿瘤生长。

MCE has not independently confirmed the accuracy of these methods. They are for reference only. Animal Model: 6-week-old female NSG (NOD-SCID) mice were injected with 3 *106 DLD1 cells. Dosage: 25 mg/kg Administration: i.p., 35 days Result: Mice Did not display any signs of acute toxicity and body weight loss. Inhibition of tumor growth by β-catenin-IN-3 was noted after 20 days of treatment, after which the tumor volume of β-catenin-IN-3 treated mice did not increase exponentially. At day 35, the calculated tumor growth inhibition by β-catenin-IN-3 was 50% as compared to the vehicle.
性状 固体
颜色 White to off-white

化学信息

分子量 484.25
分子式 C19H20Br2N2Os
CAS No. 1005288-15-2

储存&溶解度

储存方式

-20°C, protect from light, stored under nitrogen

*In solvent: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 100 mg/mL (206.50 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM2.0650 mL10.3252 mL20.6505 mL51.6262 mL
5 mM0.4130 mL2.0650 mL4.1301 mL10.3252 mL
10 mM0.2065 mL1.0325 mL2.0650 mL5.1626 mL
15 mM0.1377 mL0.6883 mL1.3767 mL3.4417 mL
20 mM0.1033 mL0.5163 mL1.0325 mL2.5813 mL
25 mM0.0826 mL0.4130 mL0.8260 mL2.0650 mL
30 mM0.0688 mL0.3442 mL0.6883 mL1.7209 mL
40 mM0.0516 mL0.2581 mL0.5163 mL1.2907 mL
50 mM0.0413 mL0.2065 mL0.4130 mL1.0325 mL
60 mM0.0344 mL0.1721 mL0.3442 mL0.8604 mL
80 mM0.0258 mL0.1291 mL0.2581 mL0.6453 mL
100 mM0.0207 mL0.1033 mL0.2065 mL0.5163 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础