PbQ 是一种靶向山羊微管蛋白的微管蛋白抑制剂(IC50=5 μM),也是一种亚铜离子 Cu(I) 荧光探针,可穿透外周血单核细胞膜,与 Cu+ 形成稳定的 1:1 复合物,对巨噬细胞系毒性低且生物相容性良好,并在肺上皮细胞中促进微管蛋白降解、破坏微管网络而不影响肌动蛋白,同时还能通过形成 DNA 碱基加合物而具有遗传毒性,激活 caspase-3 和凋亡相关基因,诱导线粒体膜电位丧失和细胞凋亡 (apoptosis),可用于慢性阻塞性肺疾病的相关研究。
产品编号: MS-N19898 CAS No.: 2693397-68-9 分子式: C26H18N4 分子量: 386.45
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

PbQ 是一种靶向山羊微管蛋白的微管蛋白抑制剂(IC50=5 μM),也是一种亚铜离子 Cu(I) 荧光探针,可穿透外周血单核细胞膜,与 Cu+ 形成稳定的 1:1 复合物,对巨噬细胞系毒性低且生物相容性良好,并在肺上皮细胞中促进微管蛋白降解、破坏微管网络而不影响肌动蛋白,同时还能通过形成 DNA 碱基加合物而具有遗传毒性,激活 caspase-3 和凋亡相关基因,诱导线粒体膜电位丧失和细胞凋亡 (apoptosis),可用于慢性阻塞性肺疾病的相关研究。

生物实验数据

生物活性 PbQ is a tubulin inhibitor targeting goat tubulin (IC50=5 μM) and a cuprous ion Cu(I) fluorescent probe that penetrates peripheral blood mononuclear cell membranes, forms a stable 1:1 complex with Cu+, exhibits low toxicity to macrophage cell lines and good biocompatibility, promotes tubulin degradation and disrupts the microtubule network without affecting actin in lung epithelial cells, and also exerts genotoxicity through the formation of DNA base adducts, activates caspase-3 and apoptosis-related genes, induces loss of mitochondrial membrane potential and apoptosis, and can be used for research related to chronic obstructive pulmonary disease.
IC50 & Target

Caspase 3

 

体外研究
(In Vitro)

PbQ (2.5-50 μM; 24 h) 以剂量依赖方式降低人 II 型肺上皮 (A549) 细胞的活力,IC50 为 5-10 μM。
PbQ (5-10 μM; 24 h) 可干扰人 II 型肺上皮 (A549) 细胞的细胞周期进程,会导致细胞呈剂量依赖性地在 sub-G0/G1 期积累,同时 G0/G1 期和 G2/M 期细胞群占比降低。
PbQ (10 μM; 6-24 h) 可在人 II 型肺上皮 (A549) 细胞中诱导时间依赖性凋亡,还会引发核 DNA 片段化。
PbQ (5-10 μM; 24 h) 可诱导人 II 型肺上皮 (A549) 细胞中细胞色素 c 呈剂量依赖性释放至胞质中。
PbQ (10 μM; 24 h) 可诱导人 II 型肺上皮 (A549) 细胞中 α-微管蛋白特异性降解 (但不影响 β-肌动蛋白),该效应发生于用 10 μM PbQ 处理 24 h 后。
PbQ (250 μM; 24 h) 与 Cu+ 离子共同孵育时,对 RAW 264.7 巨噬细胞具有高生物相容性,在 250 μM 浓度下孵育 24 h 后可维持约 80% 的细胞存活率。
PbQ (10 μM; 1 h) 可穿透外周血单个核细胞 (PBMCs) 的细胞膜,且在暴露于 Cu (I)离子 (10 μM CuCl; 30 min) 后,会在 PBMCs 中呈现出独特、选择性的高荧光增强响应,从而能够对细胞内的不稳定 Cu (I)离子进行可视化观察。

Cell Cycle Analysis

Cell Line: human type II lung epithelial (A549) cells
Concentration: 5, 10 μM
Incubation Time: 24 h
Result: Caused accumulation of A549 cells in the sub-G0/G1 phase, with 18±0.1% of cells in this phase at 5 μM and 47±4.2% at 10 μM.
Reduced the G0/G1 population to 53±5.0% at 5 μM and 29±2.0% at 10 μM.
Reduced the G2/M population to 12±0.9% at 5 μM and 7.4±1.3% at 10 μM.

Apoptosis Analysis

Cell Line: human type II lung epithelial (A549) cells
Concentration: 10 μM
Incubation Time: 6, 12, 24 h
Result: Induced time-dependent apoptosis in A549 cells, with 6% of cells apoptotic after 6 h, 15% after 12 h, and 36% after 24 h (34% early apoptotic after 24 h).
Caused nuclear DNA aberration and fragmentation in A549 cells treated for 24 h.

Cell Cytotoxicity Assay

Cell Line: RAW 264.7 macrophage cell line
Concentration: 250 μM
Incubation Time: 24 h
Result: Maintained ~80% cell viability after 24 h incubation in the presence of Cu(I) ions.

化学信息

分子量 386.45
分子式 C26H18N4
CAS No. 2693397-68-9

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础