RAGE406R 是一种口服有效的 RAGE-DIAPH1 相互作用拮抗剂,可与 ctRAGE 结合,阻止 RAGE-DIAPH1 复合物的形成并抑制其相互作用,降低 THP1 细胞中 CCL2、TNF 和 IL-6 的表达,抑制 2 型糖尿病小鼠的迟发型超敏反应,可用于糖尿病的研究。
产品编号: MS-N03327 CAS No.: 3034560-21-6 分子式: C25H24N4O2 分子量: 412.48
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

RAGE406R 是一种口服有效的 RAGE-DIAPH1 相互作用拮抗剂,可与 ctRAGE 结合,阻止 RAGE-DIAPH1 复合物的形成并抑制其相互作用,降低 THP1 细胞中 CCL2、TNF 和 IL-6 的表达,抑制 2 型糖尿病小鼠的迟发型超敏反应,可用于糖尿病的研究。

生物实验数据

生物活性 RAGE406R is an orally active antagonist of the RAGE-DIAPH1 interaction that binds to ctRAGE, prevents the formation of the RAGE-DIAPH1 complex and inhibits their interaction, reduces the expression of CCL2, TNF and IL-6 in THP1 cells, suppresses delayed-type hypersensitivity in type 2 diabetic mice, and can be used for research on diabetes.
IC50 & Target

IL-6

 

体外研究
(In Vitro)

RAGE406R (8.1 nM) 通过拮抗 ctRAGE 与 DIAPH1 之间的相互作用,抑制 ctRAGE 激活 DIAPH1 肌动蛋白聚合活性。
RAGE406R (0.1-5.0 μM,1 小时) 呈剂量依赖性地降低 RAGE 和 DIAPH1 的细胞内接近程度。添加 0.1 μM RAGE406R 后,FRET 效率降至 4.7 %;在 5.0 μM 时,FRET 效率降至 1.6 %。
RAGE406R (0.00006-10 μM,1.5 小时) 增强了 RAGE 配体刺激的平滑肌细胞 (SMC) 迁移的抑制作用,在小鼠主动脉 SMC 中的 IC50 为 2 nM。
RAGE406R (10 μM,1.5 小时) 显著降低 THP1 细胞中 CCL2、TNF 和 IL-6 的表达。

Cell Migration Assay

Cell Line: Primary murine aortic SMCs
Concentration: 0.00006 μM, 0.0002 μM, 0.001 μM, 0.002 μM, 0.005 μM, 0.014 μM, 0.041 μM, 0.123 μM, 0.370 μM, 1.111 μM, 3.333 μM, 10 μM
Incubation Time: 1.5 h
Result: Increased the inhibition of RAGE ligand-stimulated SMC migration, with an IC50 of 2 nM in murine aortic SMCs.

Real Time qPCR

Cell Line: THP1 cells
Concentration: 10 μM
Incubation Time: 1.5 h
Result: Significantly reduced the expression of CCL2, TNF, and IL6 in THP1 cells.
体内研究
(In Vivo)

RAGE406R (5 mg/kg,口服,每日两次,共 4 次) 可显著抑制 CF-1 小鼠体内 T 细胞介导的炎症反应。
RAGE406R (5 mg/kg,局部涂抹,每日两次,连续 8 天) 可加速小鼠糖尿病伤口的愈合,且在雄性小鼠中具有更全面的抗炎作用。

Animal Model: CF-1 mice were immunosensitized by injection of methylated bovine serum albumin (mBSA) (immunogen being mBSA + Freund's incomplete adjuvant emulsion) into the left inguinal lymph node. Three weeks later, an inflammatory response was elicited by injection of mBSA (20 μg) into the left hind paw pad.
Dosage: 5 mg/kg
Administration: P.o., twice daily (12-hour intervals) for a total of 4 doses
Result: Inflammation score significantly reduced.
Animal Model: Full-thickness 1 cm × 1 cm excisional wounds were created on the backs of male and female mouse models of T2D, ob/ob mice; wounds were covered with Tegaderm clear dressing.
Dosage: 5 mg/kg
Administration: Topical application, twice daily for 8 days
Result: Significantly promoted wound closure.
Inflammation was reduced, collagen deposition increased, and epithelial migration accelerated.
In male mice, the expression of Ccl2, TNF, and IL-6 was significantly reduced; in female mice, only Ccl2 expression was significantly decreased, while TNF and IL-6 showed no significant changes.

化学信息

分子量 412.48
分子式 C25H24N4O2
CAS No. 3034560-21-6

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础