R9-caPep

Synonyms: RRRRRRRRRCCLGIPEQEY
R9-caPep (RRRRRRRRRCCLGIPEQEY) 是一种源自增殖细胞核抗原 (PCNA) 的细胞穿透肽,可选择性阻断 PCNA 与 FEN1 和 LIGI 的相互作用,同时保留 POLD3 与 PCNA 的结合,从而干扰 DNA 合成以及同源重组介导的双链 DNA 断裂修复,引发 S 期阻滞、DNA 损伤累积和细胞凋亡 (apoptosis),并抑制裸鼠神经母细胞瘤的肿瘤体积与质量增长,可用于神经母细胞瘤、三阴性乳腺癌的相关研究。
产品编号: MS-M64015 CAS No.: 1207092-73-6 分子式: C103H183N47O26S2 分子量: 2560.02
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

R9-caPep (RRRRRRRRRCCLGIPEQEY) 是一种源自增殖细胞核抗原 (PCNA) 的细胞穿透肽,可选择性阻断 PCNA 与 FEN1 和 LIGI 的相互作用,同时保留 POLD3 与 PCNA 的结合,从而干扰 DNA 合成以及同源重组介导的双链 DNA 断裂修复,引发 S 期阻滞、DNA 损伤累积和细胞凋亡 (apoptosis),并抑制裸鼠神经母细胞瘤的肿瘤体积与质量增长,可用于神经母细胞瘤、三阴性乳腺癌的相关研究。

生物实验数据

生物活性 R9-caPep (RRRRRRRRRCCLGIPEQEY) is a cell-penetrating peptide derived from proliferating cell nuclear antigen (PCNA) that selectively blocks the interaction of PCNA with FEN1 and LIGI while preserving the binding of POLD3 to PCNA, thereby interfering with DNA synthesis and homologous recombination-mediated double-strand DNA break repair, inducing S-phase arrest, DNA damage accumulation, and apoptosis, and inhibiting tumor volume and mass growth of neuroblastoma in nude mice, and it can be used for research related to neuroblastoma and triple-negative breast cancer.
体外研究
(In Vitro)

R9-caPep (72 h) 抑制多种神经母细胞瘤细胞系增殖, IC50 介于 10~32 mM,阻断增殖细胞核抗原 (PCNA) 的相互作用。
R9-caPep (0-40 μM,72 h) 在 SK-N-BE(2)c 细胞中显著降低溴脱氧尿苷阳性细胞比例,造成细胞 DNA 复制停滞,抑制 SV40T 抗原介导的 DNA 复制,导致细胞发生 S 期周期阻滞,诱导细胞凋亡。
R9-caPep (60 μM; 72 h) 可诱导大多数受试乳腺癌细胞系发生细胞死亡,其中对 HCC1428 细胞 (细胞死亡增加 49%) 和 MDA-MB-231 细胞 (细胞死亡增加 47%) 的作用最强,而对 BT474 细胞无显著影响。
R9-caPep (75 μM,0-72 h) 可诱导 MDA-MB-231 细胞发生进行性 DNA 损伤和凋亡,自 24 h 起 γH2AX 水平持续升高,至 72 h 时超过 70% 的细胞出现 PARP 裂解。

Cell Cycle Analysis

Cell Line: SK-N-BE(2)c cells
Concentration: 0, 20, 40 μM
Incubation Time: 48 h
Result: Caused S-phase cell cycle arrest in neuroblastoma cells, and increased the proportion of cells in the sub-G1 phase.

Cell Viability Assay

Cell Line: HCC1428, MDA-MB-231, BT474, MDA-MB-436, MCF7, SKBR3, MDA-MB-468, HCC1143, HCC1937, UACC893, HCC38, MDA-MB-361, HCC1569
Concentration: 60 μM
Incubation Time: 72 h
Result: Induced increased cell death relative to scrambled control in all tested breast cancer cell lines except BT474.
Increased cell death by 49% in HCC1428 cells.
Increased cell death by 47% in MDA-MB-231 cells.
Showed no significant cell death increase in BT474 cells.

Immunofluorescence

Cell Line: MDA-MB-231
Concentration: 75 μM
Incubation Time: 12, 24, 48, 72 h
Result: Increased the population of cells with high γH2AX levels over the first 24 h, with levels remaining elevated through 72 h.
Increased the percentage of cells with high levels of cleaved PARP progressively over 72 h, rising from 0.2% at 0 h to over 70% by 72 h.
体内研究
(In Vivo)

R9-caPep (每周 3 次,瘤内注射) 抑制裸鼠异种移植模型中神经母细胞瘤的肿瘤体积与质量增长。

Animal Model: Nude mice (6 weeks, SK-N-BE(2)c cells (5x107 xenografts))
Dosage: /
Administration: intratumoral injection, three times per week
Result: Inhibited the growth of tumor volume and mass of neuroblastoma in nude mouse xenograft models.

化学信息

分子量 2560.02
分子式 C103H183N47O26S2
CAS No. 1207092-73-6
别名 RRRRRRRRRCCLGIPEQEY

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础