Nemadipine-A 是一种细胞渗透性 L 型钙通道抑制剂,也是 EGL-19 Ca2+ 通道 (Ca2+ channel) 的特异性抑制剂,可使对 TRAIL 抗性的癌细胞对该配体敏感。
产品编号: MS-M47038 纯度: 98.87% CAS No.: 54280-71-6 分子式: C19H18F5NO4 分子量: 419.34
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
询价
50mg
询价
询价

产品描述

Nemadipine-A 是一种细胞渗透性 L 型钙通道抑制剂,也是 EGL-19 Ca2+ 通道 (Ca2+ channel) 的特异性抑制剂,可使对 TRAIL 抗性的癌细胞对该配体敏感。

生物实验数据

生物活性 Nemadipine-A is a cell-permeable L-type calcium channel inhibitor and a specific inhibitor of the EGL-19 Ca2+ channel (Ca2+ channel) that sensitizes TRAIL-resistant cancer cells to this ligand.
体外研究
(In Vitro)

Nemadipine-A is a specific and highly effective inhibitor of EGL-19. Nemadipine-A (µM) is sufficient to abolish the enhanced level of paralysis observed in egl-19(ad695); crIs4 mutants.
Nemadipine-A strongly potentiates TRAIL-induced apoptosis in TRAIL-resistant lung cancer cells via the down-regulation of the anti-apoptotic protein survivin. Nemadipine-A sensitizes H1299 lung cancer cells towards TRAIL-induced cytotoxicity. Combination of Nemadipine-A (20 μM) with TRAIL (20 ng/mL) induces caspase-mediated apoptotic cell death.

Cell Viability Assay

Cell Line: H1299 lung adenocarcinoma cells
Concentration: 0, 5, 10, 20, and 30 μM
Incubation Time: 8 hours
Result: H1299 cells were resistant to the apoptotic effects of TRAIL, but the co-administration of Nemadipine-A and TRAIL in these cells resulted in notably increased cytotoxicity in a dose-dependent manner.

Western Blot Analysis

Cell Line: H1299 cells
Concentration: 20 μM
Incubation Time: 8 hours
Result: Co-treated with TRAIL and Nemadipine-A (T/N; 20 ng/mL and 20 μM respectively) induced cell death in H1299 cells.
性状 固体
颜色 White to light yellow

化学信息

分子量 419.34
分子式 C19H18F5NO4
CAS No. 54280-71-6

储存&溶解度

储存方式
Powder -20°C 3 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 20 mg/mL (47.69 mM; 超声加热助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM2.3847 mL11.9235 mL23.8470 mL59.6175 mL
5 mM0.4769 mL2.3847 mL4.7694 mL11.9235 mL
10 mM0.2385 mL1.1923 mL2.3847 mL5.9617 mL
15 mM0.1590 mL0.7949 mL1.5898 mL3.9745 mL
20 mM0.1192 mL0.5962 mL1.1923 mL2.9809 mL
25 mM0.0954 mL0.4769 mL0.9539 mL2.3847 mL
30 mM0.0795 mL0.3974 mL0.7949 mL1.9872 mL
40 mM0.0596 mL0.2981 mL0.5962 mL1.4904 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础